[Wed Oct  5 22:07:53 2011] Detection parameters:
  Position = (725.6, 835.7) = 23 41 39.57 -54 1 57.8
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 250.3 +/- 18.0
  Background counts = 73.7
  Rate = 0.007 +/- 0.0005

[Wed Oct  5 22:07:54 2011] Off-axis axis estimate = 11.42'
[Wed Oct  5 22:08:48 2011] Using EEF radius (= 5.81 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:08:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 22:08:48 2011] Initial guess for spatial extent in simple fitting = 5.81"
[Wed Oct  5 22:08:48 2011] source mask rpix=11.8, npix_max = 606, mask sum = 600, frac = 0.989
[Wed Oct  5 22:08:48 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 5.81"
[Wed Oct  5 22:08:48 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct  5 22:08:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12091_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 22:08:48 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct  5 22:08:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12091_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 22:08:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12091_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12091_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:08:48 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 22:08:48 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 22:08:48 2011] Fit fullrun_ccd0_acisf12091_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 22:08:59 2011] Spatial fit model total counts = 659.717000, observed total counts = 662.000000
[Wed Oct  5 22:08:59 2011] Offset between fit and detection position for source 3 = 4.151897 pixels
[Wed Oct  5 22:08:59 2011] 658.093800 total counts/ 93.467800 bgd. counts: snr = 58.402288
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.151897 pixels
  Position = (728.2, 839.0) = 23 41 39.45 -54 1 56.5
  Extent = 5.4 (5.0-6.0)", rotation angle = 0
  Source counts = 564.6 +/- 25.7
  Background counts = 93.5
  Rate = 0.01 +/- 0.0007
[Wed Oct  5 22:08:59 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:08:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:08:59 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:08:59 2011] Source does appear to be extended
[Wed Oct  5 22:08:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:09:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:09:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 22:09:26 2011] Initial guess for spatial extent in simple fitting = 5.41"
[Wed Oct  5 22:09:26 2011] source mask rpix=11.0, npix_max = 528, mask sum = 506, frac = 0.957
[Wed Oct  5 22:09:26 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.41"
[Wed Oct  5 22:09:26 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct  5 22:09:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12091_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 22:09:26 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct  5 22:09:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12091_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 22:09:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12091_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12091_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:09:27 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 22:09:27 2011] fullrun_ccd0_acisf12091_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 22:09:27 2011] Fit fullrun_ccd0_acisf12091_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 22:09:34 2011] Spatial fit model total counts = 644.054000, observed total counts = 645.000000
[Wed Oct  5 22:09:34 2011] Offset between fit and detection position for source 3 = 0.417228 pixels
[Wed Oct  5 22:09:34 2011] 642.104000 total counts/ 104.453000 bgd. counts: snr = 52.606572
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.417228 pixels
  Position = (728.2, 839.4) = 23 41 39.45 -54 1 56.3
  Extent = 5.2 (4.7-5.8)", rotation angle = 0
  Source counts = 537.7 +/- 25.3
  Background counts = 104.5
  Rate = 0.01 +/- 0.0007
[Wed Oct  5 22:09:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:09:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:09:34 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:09:34 2011] Source does appear to be extended
[Wed Oct  5 22:09:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:09:58 2011] Not overwriting source region fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.reg
[Wed Oct  5 22:09:58 2011] Extracting stamp from image fullrun_ccd0_acisf12091_pi14-548_cl_sm2.00.img.gz, (490, 601) - (966, 1077)
[Wed Oct  5 22:09:58 2011] Writing fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3.gif
[Wed Oct  5 22:10:05 2011] ../../acisf12091/products/events/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.evt and ../../acisf12091/products/events/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct  5 22:10:05 2011] Size of ../../acisf12091/products/events/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.evt.gz[events] = 674 counts
[Wed Oct  5 22:10:05 2011] Mean chipx,y = (227.56, 358.09)
[Wed Oct  5 22:10:05 2011] Mean tdetx,y = (3419.09, 4904.44)
[Wed Oct  5 22:10:05 2011] chipx,y range = (177.00-280.00, 307.00-414.00)
[Wed Oct  5 22:10:05 2011] Size of ../../acisf12091/products/events/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 728 counts
[Wed Oct  5 22:10:05 2011] ../../acisf12091/products/images/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.img and ../../acisf12091/products/images/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct  5 22:10:05 2011] ../../acisf12091/products/spectra/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.pi and ../../acisf12091/products/spectra/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct  5 22:10:08 2011] ../../acisf12091/products/lightcurves/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.lc and ../../acisf12091/products/lightcurves/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct  5 22:10:29 2011] Keeping rmf generated by specextract
[Wed Oct  5 22:10:29 2011] 151.634
[Wed Oct  5 22:18:41 2011] Updating aperture counts using extracted products
[Wed Oct  5 22:18:41 2011] Error reading totcts from fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct  5 22:18:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:18:41 2011] Using photon index=1.80, rate=0.0142, arf fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 22:18:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 22:18:41 2011] Updating source flux to 2.2e-13
[Wed Oct  5 22:18:53 2011] Reading fit data from acisf12091/analysis//spectral/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct  5 22:18:53 2011] Spectral fit parameter nH value = 3.6108e+14
[Wed Oct  5 22:18:53 2011] Spectral fit parameter PhoIndex value = 2.09321
[Wed Oct  5 22:18:53 2011] Failed to get F(0.3-8.0) from acisf12091/analysis//spectral/fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 22:18:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:18:53 2011] Using Nh = 3.6e+14, photon index=2.09, rate=0.0142, arf fullrun_ccd0_acisf12091_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 22:18:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 22:18:53 2011] Updating source flux to 2.3e-13