[Fri Sep 23 07:16:45 2011] Detection parameters:
  Position = (578.7, 373.1) = 21 55 57.19 -69 42 6.2
  Extent = 1.3" x 0.6", rotation angle = 22 degrees
  Source counts = 55.9 +/- 7.7
  Background counts = 4.1
  Rate = 0.001 +/- 0.0001

[Fri Sep 23 07:16:49 2011] Off-axis axis estimate = 5.36'
[Fri Sep 23 07:18:30 2011] Using EEF radius (= 1.33 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 07:18:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 07:18:30 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Fri Sep 23 07:18:30 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.020
[Fri Sep 23 07:18:30 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.33"
[Fri Sep 23 07:18:30 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 23 07:18:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12088_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 07:18:30 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 23 07:18:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12088_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 07:18:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12088_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12088_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 07:18:32 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 07:18:32 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 07:18:32 2011] Fit fullrun_ccd0_acisf12088_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 07:18:56 2011] Spatial fit model total counts = 66.500100, observed total counts = 67.000000
[Fri Sep 23 07:18:56 2011] Offset between fit and detection position for source 2 = 0.902807 pixels
[Fri Sep 23 07:18:56 2011] 66.850500 total counts/ 11.879900 bgd. counts: snr = 15.948656
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.902807 pixels
  Position = (579.4, 373.6) = 21 55 57.16 -69 42 6.2
  Extent = 1.3 (0.8-1.7)", rotation angle = 0
  Source counts = 55.0 +/- 8.2
  Background counts = 11.9
  Rate = 0.0009 +/- 0.0001
[Fri Sep 23 07:18:56 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:18:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:18:56 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:18:56 2011] Source does appear to be extended
[Fri Sep 23 07:18:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 07:19:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 07:19:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 07:19:33 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Fri Sep 23 07:19:33 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.098
[Fri Sep 23 07:19:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.28"
[Fri Sep 23 07:19:34 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 07:19:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12088_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 07:19:34 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 07:19:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12088_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 07:19:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12088_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12088_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 07:19:35 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 07:19:35 2011] fullrun_ccd0_acisf12088_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 07:19:35 2011] Fit fullrun_ccd0_acisf12088_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 07:19:51 2011] Spatial fit model total counts = 66.993300, observed total counts = 67.000000
[Fri Sep 23 07:19:51 2011] Offset between fit and detection position for source 2 = 0.223047 pixels
[Fri Sep 23 07:19:51 2011] 66.718900 total counts/ 17.620600 bgd. counts: snr = 11.696505
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.223047 pixels
  Position = (579.5, 373.8) = 21 55 57.15 -69 42 6.1
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 49.1 +/- 8.2
  Background counts = 17.6
  Rate = 0.0008 +/- 0.0001
[Fri Sep 23 07:19:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:19:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:19:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:19:51 2011] Source does appear to be extended
[Fri Sep 23 07:19:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 07:20:23 2011] Not overwriting source region fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 07:20:23 2011] Extracting stamp from image fullrun_ccd0_acisf12088_pi14-548_cl_sm2.00.img.gz, (528, 322) - (631, 426)
[Fri Sep 23 07:20:23 2011] Writing fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 07:20:30 2011] ../../acisf12088/products/events/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.evt and ../../acisf12088/products/events/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 07:20:30 2011] Size of ../../acisf12088/products/events/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.evt.gz[events] = 66 counts
[Fri Sep 23 07:20:30 2011] Mean chipx,y = (845.12, 451.94)
[Fri Sep 23 07:20:30 2011] Mean tdetx,y = (3512.94, 4286.88)
[Fri Sep 23 07:20:30 2011] chipx,y range = (824.00-865.00, 430.00-472.00)
[Fri Sep 23 07:20:30 2011] Size of ../../acisf12088/products/events/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 53 counts
[Fri Sep 23 07:20:30 2011] ../../acisf12088/products/images/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.img and ../../acisf12088/products/images/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 07:20:30 2011] ../../acisf12088/products/spectra/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.pi and ../../acisf12088/products/spectra/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 07:20:30 2011] Not generating rmf since there are only 49 counts
[Fri Sep 23 07:20:33 2011] ../../acisf12088/products/lightcurves/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.lc and ../../acisf12088/products/lightcurves/fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 07:21:55 2011] 183.764
[Fri Sep 23 07:25:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 07:25:54 2011] Error reading totcts from fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 07:25:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 07:25:55 2011] Using photon index=1.80, rate=0.000841, arf fullrun_ccd0_acisf12088_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 07:25:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 07:25:55 2011] Updating source flux to 1.1e-14
[Fri Sep 23 07:26:05 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting