[Wed Feb 15 15:41:58 2012] Detection parameters:
  Position = (546.1, 387.0) = 8 35 30.07 -45 12 59.1
  Extent = 1.1" x 0.6", rotation angle = 170 degrees
  Source counts = 35.5 +/- 7.3
  Background counts = 17.5
  Rate = 0.0009 +/- 0.0002

[Wed Feb 15 15:41:58 2012] Off-axis axis estimate = 4.46'
[Wed Feb 15 16:07:25 2012] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 16:07:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 16:07:25 2012] Initial guess for spatial extent in simple fitting = 0.98"
[Wed Feb 15 16:07:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Wed Feb 15 16:07:25 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.98"
[Wed Feb 15 16:53:13 2012] fullrun_ccd7_acisf12073_pi14-548_cl_pass0_src27.ximg exists
[Wed Feb 15 16:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12073_pi14-548_cl_pass0_src27.csv
[Wed Feb 15 16:53:13 2012] fullrun_ccd7_acisf12073_pi14-548_cl_pass0_src27_1.ximg exists
[Wed Feb 15 16:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12073_pi14-548_cl_pass0_src27.csv
[Wed Feb 15 16:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12073_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12073_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 16:53:13 2012] fullrun_ccd7_acisf12073_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Wed Feb 15 16:53:13 2012] fullrun_ccd7_acisf12073_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Feb 15 16:53:13 2012] Fit fullrun_ccd7_acisf12073_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Feb 15 16:53:23 2012] Spatial fit model total counts = 78.678500, observed total counts = 78.000000
[Wed Feb 15 16:53:23 2012] Offset between fit and detection position for source 28 = 0.452696 pixels
[Wed Feb 15 16:53:23 2012] 80.586500 total counts/ 46.766000 bgd. counts: snr = 4.945554
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.452696 pixels
  Position = (546.2, 387.5) = 8 35 30.09 -45 12 59.1
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 33.8 +/- 9.0
  Background counts = 46.8
  Rate = 0.0009 +/- 0.0002
[Wed Feb 15 16:53:23 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 16:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 16:53:23 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 16:53:23 2012] Source does appear to be extended
[Wed Feb 15 16:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 16:53:23 2012] Deleting source due to low Poisson probability 0.7