[Sat Oct  1 10:27:39 2011] Detection parameters:
  Position = (525.8, 747.2) = 5 19 12.64 -69 0 26.8
  Extent = 0.9" x 0.5", rotation angle = 130 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0002

[Sat Oct  1 10:27:40 2011] Off-axis axis estimate = 2.43'
[Sat Oct  1 10:28:40 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:28:40 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Sat Oct  1 10:28:40 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.027
[Sat Oct  1 10:28:40 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.48"
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src30.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src30.csv
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src30_1.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src30.csv
[Sat Oct  1 10:28:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src30.csv
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src30.csv
[Sat Oct  1 10:28:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:28:52 2011] Spatial fit model total counts = 12.848000, observed total counts = 14.000000
[Sat Oct  1 10:28:52 2011] Offset between fit and detection position for source 22 = 0.751649 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.751649 pixels
  Position = (526.2, 747.9) = 5 19 12.66 -69 0 26.7
  Extent = 1.2 (0.7-1.5)" x 0.3 (0.2-0.5)", rotation angle = 50 (42-59) degrees
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sat Oct  1 10:28:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:28:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:28:52 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:28:52 2011] Source does appear to be extended
[Sat Oct  1 10:28:52 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Sat Oct  1 10:28:52 2011] Deleting source due to low Poisson probability 0.6