[Sat Oct  1 10:27:38 2011] Detection parameters:
  Position = (738.7, 521.1) = 5 18 53.10 -69 2 17.9
  Extent = 0.8" x 0.5", rotation angle = 143 degrees
  Source counts = 18.5 +/- 4.5
  Background counts = 1.5
  Rate = 0.0009 +/- 0.0002

[Sat Oct  1 10:27:40 2011] Off-axis axis estimate = 3.68'
[Sat Oct  1 10:28:40 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:28:40 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sat Oct  1 10:28:40 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Sat Oct  1 10:28:40 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.74"
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src25.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src25.csv
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src25_1.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src25.csv
[Sat Oct  1 10:28:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12062_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src25.csv
[Sat Oct  1 10:28:43 2011] fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Oct  1 10:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src25.csv
[Sat Oct  1 10:28:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12062_pi14-548_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:28:52 2011] Spatial fit model total counts = 19.459300, observed total counts = 22.000000
[Sat Oct  1 10:28:52 2011] Offset between fit and detection position for source 12 = 0.631948 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.631948 pixels
  Position = (739.3, 521.4) = 5 18 53.09 -69 2 18.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 19.5 +/- 4.4
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sat Oct  1 10:28:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:28:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:28:52 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:28:52 2011] Source does appear to be extended
[Sat Oct  1 10:28:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:28:52 2011] Deleting source due to low Poisson probability 0.6