[Sat Oct  1 10:27:36 2011] Detection parameters:
  Position = (803.9, 141.6) = 5 20 20.53 -69 6 53.0
  Extent = 1.8" x 1.4", rotation angle = 75 degrees
  Source counts = 106.6 +/- 10.7
  Background counts = 7.4
  Rate = 0.005 +/- 0.0005

[Sat Oct  1 10:27:36 2011] Off-axis axis estimate = 6.45'
[Sat Oct  1 10:28:40 2011] Using EEF radius (= 1.87 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:28:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 10:28:40 2011] Initial guess for spatial extent in simple fitting = 1.87"
[Sat Oct  1 10:28:40 2011] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.976
[Sat Oct  1 10:28:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.87"
[Sat Oct  1 10:28:40 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 10:28:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12062_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 10:28:40 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 10:28:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12062_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 10:28:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12062_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12062_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:28:40 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 10:28:40 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 10:28:40 2011] Fit fullrun_ccd6_acisf12062_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 10:28:48 2011] Spatial fit model total counts = 115.339000, observed total counts = 115.000000
[Sat Oct  1 10:28:48 2011] Offset between fit and detection position for source 1 = 0.640731 pixels
[Sat Oct  1 10:28:48 2011] 115.428870 total counts/ 2.334870 bgd. counts: snr = 74.013035
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.640731 pixels
  Position = (804.4, 142.0) = 5 20 20.53 -69 6 53.1
  Extent = 2.1 (1.9-2.4)", rotation angle = 0
  Source counts = 113.1 +/- 10.7
  Background counts = 2.3
  Rate = 0.005 +/- 0.0005
[Sat Oct  1 10:28:48 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:28:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:28:48 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:28:48 2011] Source does appear to be extended
[Sat Oct  1 10:28:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:29:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:29:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 10:29:09 2011] Initial guess for spatial extent in simple fitting = 2.15"
[Sat Oct  1 10:29:09 2011] source mask rpix=4.4, npix_max = 94, mask sum = 90, frac = 0.952
[Sat Oct  1 10:29:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.15"
[Sat Oct  1 10:29:09 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 10:29:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12062_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 10:29:09 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 10:29:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12062_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 10:29:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12062_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12062_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:29:09 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 10:29:09 2011] fullrun_ccd6_acisf12062_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 10:29:09 2011] Fit fullrun_ccd6_acisf12062_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 10:29:16 2011] Spatial fit model total counts = 120.025000, observed total counts = 120.000000
[Sat Oct  1 10:29:16 2011] Offset between fit and detection position for source 1 = 0.108803 pixels
[Sat Oct  1 10:29:16 2011] 120.468300 total counts/ 13.125300 bgd. counts: snr = 29.629144
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.108803 pixels
  Position = (804.3, 142.0) = 5 20 20.54 -69 6 53.1
  Extent = 2.0 (1.8-2.3)", rotation angle = 0
  Source counts = 107.3 +/- 11.0
  Background counts = 13.1
  Rate = 0.005 +/- 0.0005
[Sat Oct  1 10:29:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:29:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:29:16 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:29:16 2011] Source does appear to be extended
[Sat Oct  1 10:29:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:29:51 2011] Not overwriting source region fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 10:29:51 2011] Extracting stamp from image fullrun_ccd6_acisf12062_pi14-548_cl_sm2.00.img.gz, (711, 48) - (898, 236)
[Sat Oct  1 10:29:51 2011] Writing fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 10:29:52 2011] ../../acisf12062/products/events/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.evt and ../../acisf12062/products/events/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 10:29:52 2011] Size of ../../acisf12062/products/events/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.evt.gz[events] = 116 counts
[Sat Oct  1 10:29:52 2011] Mean chipx,y = (627.87, 996.39)
[Sat Oct  1 10:29:52 2011] Mean tdetx,y = (3502.87, 2698.39)
[Sat Oct  1 10:29:52 2011] chipx,y range = (606.00-653.00, 971.00-1021.00)
[Sat Oct  1 10:29:52 2011] Size of ../../acisf12062/products/events/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 53 counts
[Sat Oct  1 10:29:52 2011] ../../acisf12062/products/images/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.img and ../../acisf12062/products/images/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 10:29:52 2011] ../../acisf12062/products/spectra/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.pi and ../../acisf12062/products/spectra/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 10:29:56 2011] ../../acisf12062/products/lightcurves/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.lc and ../../acisf12062/products/lightcurves/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 10:30:24 2011] Keeping rmf generated by specextract
[Sat Oct  1 10:30:25 2011] 178.952
[Sat Oct  1 10:31:39 2011] Updating aperture counts using extracted products
[Sat Oct  1 10:31:39 2011] Error reading totcts from fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 10:31:39 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 10:31:39 2011] Using photon index=1.80, rate=0.00514, arf fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 10:31:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 10:31:39 2011] Updating source flux to 6.5e-14
[Sat Oct  1 10:31:50 2011] Reading fit data from acisf12062/analysis//spectral/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 10:31:50 2011] Spectral fit parameter nH value = 8.33624e+14
[Sat Oct  1 10:31:50 2011] Spectral fit parameter PhoIndex value = 1.47157
[Sat Oct  1 10:31:50 2011] Failed to get F(0.3-8.0) from acisf12062/analysis//spectral/fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 10:31:50 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 10:31:50 2011] Using Nh = 8.3e+14, photon index=1.47, rate=0.00514, arf fullrun_ccd6_acisf12062_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 10:31:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 10:31:50 2011] Updating source flux to 7.4e-14