[Tue Jan 17 13:32:17 2012] Detection parameters:
  Position = (176.4, 900.0) = 3 32 59.22 -27 49 0.8
  Extent = 2.1" x 1.1", rotation angle = 167 degrees
  Source counts = 18.2 +/- 5.1
  Background counts = 7.8
  Rate = 0.0002 +/- 6e-05

[Tue Jan 17 13:32:18 2012] Off-axis axis estimate = 7.20'
[Tue Jan 17 15:10:35 2012] Using EEF radius (= 2.30 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:10:35 2012] Initial guess for spatial extent in simple fitting = 2.30"
[Tue Jan 17 15:10:35 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.023
[Tue Jan 17 15:10:35 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 2.30"
[Tue Jan 17 15:35:44 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass0_src15.ximg exists
[Tue Jan 17 15:35:44 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12055_pi14-548_cl_pass0_src15.csv
[Tue Jan 17 15:35:44 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass0_src15_1.ximg exists
[Tue Jan 17 15:35:44 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12055_pi14-548_cl_pass0_src15.csv
[Tue Jan 17 15:35:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12055_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12055_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:35:45 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Tue Jan 17 15:35:45 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jan 17 15:35:45 2012] Fit fullrun_ccd3_acisf12055_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jan 17 15:59:56 2012] Spatial fit model total counts = 44.068000, observed total counts = 44.000000
[Tue Jan 17 15:59:56 2012] Offset between fit and detection position for source 23 = 5.549719 pixels
[Tue Jan 17 15:59:56 2012] 43.845415 total counts/ 0.772215 bgd. counts: snr = 49.016017
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 5.549719 pixels
  Position = (173.0, 904.4) = 3 32 59.36 -27 48 58.9
  Extent = 3.0 (1.6-4.0)", rotation angle = 0
  Source counts = 43.1 +/- 6.6
  Background counts = 0.8
  Rate = 0.0005 +/- 8e-05
[Tue Jan 17 15:59:56 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:59:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:59:56 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:59:56 2012] Source does appear to be extended
[Tue Jan 17 15:59:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:19:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 17:19:13 2012] Initial guess for spatial extent in simple fitting = 2.96"
[Tue Jan 17 17:19:13 2012] source mask rpix=6.0, npix_max = 170, mask sum = 182, frac = 1.070
[Tue Jan 17 17:19:13 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 2.96"
[Tue Jan 17 17:44:17 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass1_src15.ximg exists
[Tue Jan 17 17:44:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12055_pi14-548_cl_pass1_src15.csv
[Tue Jan 17 17:44:17 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass1_src15_1.ximg exists
[Tue Jan 17 17:44:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12055_pi14-548_cl_pass1_src15.csv
[Tue Jan 17 17:44:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12055_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12055_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:44:17 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Tue Jan 17 17:44:17 2012] fullrun_ccd3_acisf12055_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jan 17 17:44:17 2012] Fit fullrun_ccd3_acisf12055_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jan 17 18:38:05 2012] Spatial fit model total counts = 58.585900, observed total counts = 59.000000
[Tue Jan 17 18:38:05 2012] Offset between fit and detection position for source 23 = 1.263759 pixels
[Tue Jan 17 18:38:05 2012] 59.017400 total counts/ 30.373700 bgd. counts: snr = 5.197330
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.263759 pixels
  Position = (173.7, 903.4) = 3 32 59.33 -27 48 59.4
  Extent = 2.4 (1.5-3.9)", rotation angle = 0
  Source counts = 28.6 +/- 7.7
  Background counts = 30.4
  Rate = 0.0004 +/- 0.0001
[Tue Jan 17 18:38:05 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:38:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:38:05 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:38:05 2012] Source does appear to be extended
[Tue Jan 17 18:38:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:19:25 2012] Writing source region out to fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23_src.reg
[Tue Jan 17 19:19:25 2012] Extracting stamp from image fullrun_ccd3_acisf12055_pi14-548_cl_sm2.00.img.gz, (65, 795) - (282, 1012)
[Tue Jan 17 19:19:25 2012] Writing fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23.gif
[Tue Jan 17 19:26:51 2012] Size of ../../acisf12055/products/events/fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23_src.evt.gz[events] = 55 counts
[Tue Jan 17 19:26:51 2012] Mean chipx,y = (871.60, 142.69)
[Tue Jan 17 19:26:51 2012] Mean tdetx,y = (4989.31, 3932.60)
[Tue Jan 17 19:26:51 2012] chipx,y range = (841.00-900.00, 111.00-170.00)
[Tue Jan 17 19:26:51 2012] Size of ../../acisf12055/products/events/fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 308 counts
[Tue Jan 17 19:26:52 2012] Not generating rmf since there are only 28 counts
[Tue Jan 17 19:26:52 2012] arf not found, will run specextract
[Tue Jan 17 19:27:08 2012] ../../acisf12055/products/spectra/fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23.warf not found
[Tue Jan 17 19:27:08 2012] ../../acisf12055/products/spectra/fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23.wrmf not found
[Tue Jan 17 19:27:08 2012] Removal of ../../acisf12055/products/spectra/fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23.soff failed
[Tue Jan 17 19:36:03 2012] Spectrum 23 has only 29 counts, deleting rmf
[Tue Jan 17 19:36:03 2012] 177.196
[Tue Jan 17 19:36:47 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:36:47 2012] Error reading totcts from fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23_src.pi.gz
[Tue Jan 17 19:36:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:36:48 2012] Using photon index=1.80, rate=0.000355, arf fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23.arf
[Tue Jan 17 19:36:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 19:36:48 2012] Updating source flux to 4.9e-15
[Tue Jan 17 19:37:13 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 19:37:14 2012] acisf12055/analysis//spectral/fullrun_ccd3_acisf12055_pi14-548_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete