[Tue Jan 17 13:32:14 2012] Detection parameters:
  Position = (440.7, 932.0) = 3 32 10.96 -27 48 56.6
  Extent = 0.8" x 0.5", rotation angle = 20 degrees
  Source counts = 20.0 +/- 4.7
  Background counts = 2.0
  Rate = 0.0002 +/- 6e-05

[Tue Jan 17 13:32:15 2012] Off-axis axis estimate = 3.51'
[Tue Jan 17 14:51:41 2012] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:51:41 2012] Initial guess for spatial extent in simple fitting = 0.69"
[Tue Jan 17 14:51:41 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.096
[Tue Jan 17 14:51:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.69"
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src9.ximg exists
[Tue Jan 17 15:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src9.csv
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src9_1.ximg exists
[Tue Jan 17 15:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src9.csv
[Tue Jan 17 15:10:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jan 17 15:10:35 2012] Fit fullrun_ccd2_acisf12055_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jan 17 15:59:54 2012] Spatial fit model total counts = 22.785500, observed total counts = 24.000000
[Tue Jan 17 15:59:54 2012] Offset between fit and detection position for source 5 = 0.949447 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.949447 pixels
  Position = (441.4, 932.6) = 3 32 10.95 -27 48 56.5
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 22.0 +/- 4.7
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Tue Jan 17 15:59:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:59:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:59:54 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:59:54 2012] Source does appear to be extended
[Tue Jan 17 15:59:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 16:58:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:58:42 2012] Initial guess for spatial extent in simple fitting = 0.88"
[Tue Jan 17 16:58:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.190
[Tue Jan 17 16:58:42 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.88"
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src9.ximg exists
[Tue Jan 17 17:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src9.csv
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src9_1.ximg exists
[Tue Jan 17 17:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src9.csv
[Tue Jan 17 17:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jan 17 17:19:13 2012] Fit fullrun_ccd2_acisf12055_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jan 17 18:38:03 2012] Spatial fit model total counts = 22.945300, observed total counts = 24.000000
[Tue Jan 17 18:38:03 2012] Offset between fit and detection position for source 5 = 0.024057 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.024057 pixels
  Position = (441.4, 932.6) = 3 32 10.95 -27 48 56.6
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 22.2 +/- 4.7
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Tue Jan 17 18:38:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:38:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:38:03 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:38:03 2012] Source does appear to be extended
[Tue Jan 17 18:38:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:03:36 2012] Writing source region out to fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5_src.reg
[Tue Jan 17 19:03:36 2012] Extracting stamp from image fullrun_ccd2_acisf12055_pi14-548_cl_sm2.00.img.gz, (402, 893) - (481, 972)
[Tue Jan 17 19:03:36 2012] Writing fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5.gif
[Tue Jan 17 19:08:15 2012] Size of ../../acisf12055/products/events/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5_src.evt.gz[events] = 22 counts
[Tue Jan 17 19:08:15 2012] Mean chipx,y = (112.05, 620.73)
[Tue Jan 17 19:08:15 2012] Mean tdetx,y = (3681.73, 3973.95)
[Tue Jan 17 19:08:15 2012] chipx,y range = (97.00-130.00, 602.00-641.00)
[Tue Jan 17 19:08:15 2012] Size of ../../acisf12055/products/events/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 43 counts
[Tue Jan 17 19:08:16 2012] Not generating rmf since there are only 22 counts
[Tue Jan 17 19:08:16 2012] arf not found, will run specextract
[Tue Jan 17 19:08:42 2012] ../../acisf12055/products/spectra/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5.warf not found
[Tue Jan 17 19:08:42 2012] ../../acisf12055/products/spectra/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5.wrmf not found
[Tue Jan 17 19:08:42 2012] Removal of ../../acisf12055/products/spectra/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5.soff failed
[Tue Jan 17 19:19:24 2012] Spectrum 5 has only 22 counts, deleting rmf
[Tue Jan 17 19:19:24 2012] 185.851
[Tue Jan 17 19:36:47 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:36:47 2012] Error reading totcts from fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5_src.pi.gz
[Tue Jan 17 19:36:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:36:47 2012] Using photon index=1.80, rate=0.000275, arf fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5.arf
[Tue Jan 17 19:36:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 19:36:47 2012] Updating source flux to 3.5e-15
[Tue Jan 17 19:37:12 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 19:37:13 2012] acisf12055/analysis//spectral/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete