[Tue Jan 17 13:32:14 2012] Detection parameters:
  Position = (630.1, 376.3) = 3 32 3.91 -27 53 29.9
  Extent = 0.7" x 0.6", rotation angle = 13 degrees
  Source counts = 11.8 +/- 4.0
  Background counts = 4.2
  Rate = 0.0001 +/- 5e-05

[Tue Jan 17 13:32:15 2012] Off-axis axis estimate = 7.07'
[Tue Jan 17 14:51:41 2012] Using EEF radius (= 2.22 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:51:41 2012] Initial guess for spatial extent in simple fitting = 2.22"
[Tue Jan 17 14:51:41 2012] source mask rpix=4.5, npix_max = 100, mask sum = 90, frac = 0.893
[Tue Jan 17 14:51:41 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 2.22"
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src14.ximg exists
[Tue Jan 17 15:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src14.csv
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src14_1.ximg exists
[Tue Jan 17 15:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src14.csv
[Tue Jan 17 15:10:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12055_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Tue Jan 17 15:10:35 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jan 17 15:10:35 2012] Fit fullrun_ccd2_acisf12055_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Jan 17 15:59:54 2012] Source 12 is offset by 6.379869 and 2.129741 pixels which is larger than
2 X fitted extent = 6.220299 x 6.220299, not incorporating fit results
[Tue Jan 17 15:59:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:59:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:59:54 2012] Assessing source extent using major
[Tue Jan 17 15:59:54 2012] Source does appear to be extended
[Tue Jan 17 15:59:54 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Tue Jan 17 16:58:42 2012] Using EEF radius (= 2.22 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:58:42 2012] Initial guess for spatial extent in simple fitting = 2.22"
[Tue Jan 17 16:58:42 2012] source mask rpix=4.5, npix_max = 100, mask sum = 90, frac = 0.893
[Tue Jan 17 16:58:42 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 2.22"
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src14.ximg exists
[Tue Jan 17 17:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src14.csv
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src14_1.ximg exists
[Tue Jan 17 17:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src14.csv
[Tue Jan 17 17:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12055_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Tue Jan 17 17:19:13 2012] fullrun_ccd2_acisf12055_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jan 17 17:19:13 2012] Fit fullrun_ccd2_acisf12055_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Jan 17 18:38:03 2012] Spatial fit model total counts = 49.217500, observed total counts = 49.000000
[Tue Jan 17 18:38:03 2012] Offset between fit and detection position for source 12 = 6.500827 pixels
[Tue Jan 17 18:38:03 2012] 50.882200 total counts/ 33.250400 bgd. counts: snr = 3.057724
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 6.500827 pixels
  Position = (623.9, 374.4) = 3 32 4.16 -27 53 31.1
  Extent = 1.6 (0.7-2.2)", rotation angle = 0
  Source counts = 17.6 +/- 7.1
  Background counts = 33.3
  Rate = 0.0002 +/- 9e-05
[Tue Jan 17 18:38:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:38:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:38:03 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:38:03 2012] Source does appear to be extended
[Tue Jan 17 18:38:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:03:36 2012] Writing source region out to fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12_src.reg
[Tue Jan 17 19:03:36 2012] Extracting stamp from image fullrun_ccd2_acisf12055_pi14-548_cl_sm2.00.img.gz, (550, 300) - (698, 449)
[Tue Jan 17 19:03:36 2012] Writing fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12.gif
[Tue Jan 17 19:11:06 2012] Size of ../../acisf12055/products/events/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12_src.evt.gz[events] = 39 counts
[Tue Jan 17 19:11:06 2012] Mean chipx,y = (664.77, 422.56)
[Tue Jan 17 19:11:06 2012] Mean tdetx,y = (3483.56, 3421.23)
[Tue Jan 17 19:11:06 2012] chipx,y range = (643.00-695.00, 405.00-449.00)
[Tue Jan 17 19:11:06 2012] Size of ../../acisf12055/products/events/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 158 counts
[Tue Jan 17 19:11:07 2012] Not generating rmf since there are only 17 counts
[Tue Jan 17 19:11:07 2012] arf not found, will run specextract
[Tue Jan 17 19:11:31 2012] ../../acisf12055/products/spectra/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12.warf not found
[Tue Jan 17 19:11:31 2012] ../../acisf12055/products/spectra/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12.wrmf not found
[Tue Jan 17 19:11:31 2012] Removal of ../../acisf12055/products/spectra/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12.soff failed
[Tue Jan 17 19:19:24 2012] Spectrum 12 has only 18 counts, deleting rmf
[Tue Jan 17 19:19:24 2012] 165.772
[Tue Jan 17 19:36:47 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:36:47 2012] Error reading totcts from fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12_src.pi.gz
[Tue Jan 17 19:36:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:36:47 2012] Using photon index=1.80, rate=0.000219, arf fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12.arf
[Tue Jan 17 19:36:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 19:36:47 2012] Updating source flux to 3.2e-15
[Tue Jan 17 19:37:12 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Tue Jan 17 19:37:12 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 19:37:13 2012] acisf12055/analysis//spectral/fullrun_ccd2_acisf12055_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete