[Tue Jan 17 13:32:09 2012] Detection parameters:
  Position = (640.9, 248.2) = 3 32 2.47 -27 46 1.3
  Extent = 0.7" x 0.6", rotation angle = 38 degrees
  Source counts = 18.0 +/- 4.6
  Background counts = 3.0
  Rate = 0.0002 +/- 6e-05

[Tue Jan 17 13:32:10 2012] Off-axis axis estimate = 5.92'
[Tue Jan 17 13:34:40 2012] Using EEF radius (= 1.59 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 13:34:40 2012] Initial guess for spatial extent in simple fitting = 1.59"
[Tue Jan 17 13:34:40 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.148
[Tue Jan 17 13:34:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 1.59"
[Tue Jan 17 14:26:59 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass0_src11.ximg exists
[Tue Jan 17 14:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12055_pi14-548_cl_pass0_src11.csv
[Tue Jan 17 14:26:59 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Jan 17 14:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12055_pi14-548_cl_pass0_src11.csv
[Tue Jan 17 14:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12055_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12055_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 14:26:59 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Jan 17 14:26:59 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jan 17 14:26:59 2012] Fit fullrun_ccd0_acisf12055_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jan 17 15:59:49 2012] Spatial fit model total counts = 45.646600, observed total counts = 46.000000
[Tue Jan 17 15:59:49 2012] Offset between fit and detection position for source 23 = 2.218632 pixels
[Tue Jan 17 15:59:49 2012] 44.955200 total counts/ 6.524600 bgd. counts: snr = 15.045278
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.218632 pixels
  Position = (642.8, 249.4) = 3 32 2.41 -27 46 1.0
  Extent = 1.9 (1.5-2.6)", rotation angle = 0
  Source counts = 38.4 +/- 6.7
  Background counts = 6.5
  Rate = 0.0005 +/- 8e-05
[Tue Jan 17 15:59:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:59:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:59:49 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:59:49 2012] Source does appear to be extended
[Tue Jan 17 15:59:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 16:00:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:00:17 2012] Initial guess for spatial extent in simple fitting = 1.90"
[Tue Jan 17 16:00:17 2012] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.061
[Tue Jan 17 16:00:17 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 1.90"
[Tue Jan 17 16:39:37 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass1_src11.ximg exists
[Tue Jan 17 16:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12055_pi14-548_cl_pass1_src11.csv
[Tue Jan 17 16:39:37 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Jan 17 16:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12055_pi14-548_cl_pass1_src11.csv
[Tue Jan 17 16:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12055_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12055_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:39:37 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Jan 17 16:39:37 2012] fullrun_ccd0_acisf12055_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jan 17 16:39:37 2012] Fit fullrun_ccd0_acisf12055_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jan 17 18:37:59 2012] Spatial fit model total counts = 49.995900, observed total counts = 50.000000
[Tue Jan 17 18:37:59 2012] Offset between fit and detection position for source 23 = 0.459225 pixels
[Tue Jan 17 18:37:59 2012] 49.949400 total counts/ 13.848000 bgd. counts: snr = 9.701313
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.459225 pixels
  Position = (642.7, 248.9) = 3 32 2.42 -27 46 1.2
  Extent = 1.8 (1.5-2.4)", rotation angle = 0
  Source counts = 36.1 +/- 7.1
  Background counts = 13.8
  Rate = 0.0004 +/- 9e-05
[Tue Jan 17 18:37:59 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:37:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:37:59 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:37:59 2012] Source does appear to be extended
[Tue Jan 17 18:37:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:38:28 2012] Writing source region out to fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23_src.reg
[Tue Jan 17 18:38:28 2012] Extracting stamp from image fullrun_ccd0_acisf12055_pi14-548_cl_sm2.00.img.gz, (560, 166) - (726, 332)
[Tue Jan 17 18:38:28 2012] Writing fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23.gif
[Tue Jan 17 18:43:46 2012] Size of ../../acisf12055/products/events/fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23_src.evt.gz[events] = 44 counts
[Tue Jan 17 18:43:46 2012] Mean chipx,y = (800.27, 399.30)
[Tue Jan 17 18:43:46 2012] Mean tdetx,y = (3460.30, 4331.73)
[Tue Jan 17 18:43:46 2012] chipx,y range = (774.00-823.00, 373.00-419.00)
[Tue Jan 17 18:43:46 2012] Size of ../../acisf12055/products/events/fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 164 counts
[Tue Jan 17 18:43:48 2012] Not generating rmf since there are only 36 counts
[Tue Jan 17 18:43:48 2012] arf not found, will run specextract
[Tue Jan 17 18:44:08 2012] ../../acisf12055/products/spectra/fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23.warf not found
[Tue Jan 17 18:44:08 2012] ../../acisf12055/products/spectra/fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23.wrmf not found
[Tue Jan 17 18:44:08 2012] Removal of ../../acisf12055/products/spectra/fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23.soff failed
[Tue Jan 17 18:50:44 2012] Spectrum 23 has only 36 counts, deleting rmf
[Tue Jan 17 18:50:44 2012] 180.898
[Tue Jan 17 19:36:46 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:36:46 2012] Error reading totcts from fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23_src.pi.gz
[Tue Jan 17 19:36:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:36:46 2012] Using photon index=1.80, rate=0.000447, arf fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23.arf
[Tue Jan 17 19:36:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 19:36:46 2012] Updating source flux to 5.9e-15
[Tue Jan 17 19:36:52 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 19:36:59 2012] acisf12055/analysis//spectral/fullrun_ccd0_acisf12055_pi14-548_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete