[Tue Jan 17 18:24:53 2012] Detection parameters:
  Position = (466.4, 508.2) = 3 32 35.01 -27 55 11.3
  Extent = 1.7" x 1.2", rotation angle = 161 degrees
  Source counts = 21.1 +/- 5.3
  Background counts = 6.9
  Rate = 0.0003 +/- 9e-05

[Tue Jan 17 18:24:54 2012] Off-axis axis estimate = 7.31'
[Tue Jan 17 19:41:13 2012] Using EEF radius (= 2.37 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 19:41:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 19:41:13 2012] Initial guess for spatial extent in simple fitting = 2.37"
[Tue Jan 17 19:41:13 2012] source mask rpix=4.8, npix_max = 113, mask sum = 110, frac = 0.973
[Tue Jan 17 19:41:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 2.37"
[Tue Jan 17 19:57:29 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass0_src3.ximg exists
[Tue Jan 17 19:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12054_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 19:57:29 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Jan 17 19:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12054_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 19:57:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12054_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12054_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 19:57:29 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 19:57:29 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 19:57:29 2012] Fit fullrun_ccd3_acisf12054_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 20:04:20 2012] Spatial fit model total counts = 33.515400, observed total counts = 36.000000
[Tue Jan 17 20:04:20 2012] Offset between fit and detection position for source 6 = 1.888176 pixels
[Tue Jan 17 20:04:20 2012] 32.912150 total counts/ 6.545550 bgd. counts: snr = 10.305785
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.888176 pixels
  Position = (468.3, 508.3) = 3 32 34.95 -27 55 11.5
  Extent = 1.8 (1.3-2.2)", rotation angle = 0
  Source counts = 26.4 +/- 5.7
  Background counts = 6.5
  Rate = 0.0004 +/- 9e-05
[Tue Jan 17 20:04:20 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 20:04:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 20:04:20 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 20:04:20 2012] Source does appear to be extended
[Tue Jan 17 20:04:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 21:06:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:06:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 21:06:58 2012] Initial guess for spatial extent in simple fitting = 1.85"
[Tue Jan 17 21:06:58 2012] source mask rpix=3.8, npix_max = 72, mask sum = 81, frac = 1.118
[Tue Jan 17 21:06:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.85"
[Tue Jan 17 21:23:51 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass1_src3.ximg exists
[Tue Jan 17 21:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12054_pi14-548_cl_pass1_src3.csv
[Tue Jan 17 21:23:51 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Jan 17 21:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12054_pi14-548_cl_pass1_src3.csv
[Tue Jan 17 21:23:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12054_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12054_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 21:23:51 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 21:23:51 2012] fullrun_ccd3_acisf12054_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 21:23:51 2012] Fit fullrun_ccd3_acisf12054_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 21:31:24 2012] Source 6 is offset by 3.623688 and -7.893264 pixels which is larger than
2 X fitted extent = 1.878415 x 1.878415, not incorporating fit results
[Tue Jan 17 21:31:24 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 21:31:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 21:31:24 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 21:31:24 2012] Source does appear to be extended
[Tue Jan 17 21:31:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 22:07:43 2012] Writing source region out to fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6_src.reg
[Tue Jan 17 22:07:43 2012] Extracting stamp from image fullrun_ccd3_acisf12054_pi14-548_cl_sm2.00.img.gz, (384, 424) - (553, 593)
[Tue Jan 17 22:07:43 2012] Writing fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6.gif
[Tue Jan 17 22:08:58 2012] Size of ../../acisf12054/products/events/fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6_src.evt.gz[events] = 34 counts
[Tue Jan 17 22:08:58 2012] Mean chipx,y = (597.97, 202.91)
[Tue Jan 17 22:08:58 2012] Mean tdetx,y = (4929.09, 3658.97)
[Tue Jan 17 22:08:58 2012] chipx,y range = (574.00-620.00, 176.00-225.00)
[Tue Jan 17 22:08:58 2012] Size of ../../acisf12054/products/events/fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 138 counts
[Tue Jan 17 22:09:00 2012] Not generating rmf since there are only 26 counts
[Tue Jan 17 22:09:00 2012] arf not found, will run specextract
[Tue Jan 17 22:09:23 2012] ../../acisf12054/products/spectra/fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6.warf not found
[Tue Jan 17 22:09:23 2012] ../../acisf12054/products/spectra/fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6.wrmf not found
[Tue Jan 17 22:09:23 2012] Removal of ../../acisf12054/products/spectra/fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6.soff failed
[Tue Jan 17 22:27:25 2012] Spectrum 6 has only 26 counts, deleting rmf
[Tue Jan 17 22:27:25 2012] 174.713
[Tue Jan 17 22:28:48 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:28:48 2012] Error reading totcts from fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Jan 17 22:28:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:28:48 2012] Using photon index=1.80, rate=0.000432, arf fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6.arf
[Tue Jan 17 22:28:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 22:28:48 2012] Updating source flux to 6e-15
[Tue Jan 17 22:29:14 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Jan 17 22:29:14 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 22:29:15 2012] acisf12054/analysis//spectral/fullrun_ccd3_acisf12054_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete