[Tue Jan 17 18:24:50 2012] Detection parameters:
  Position = (480.7, 1021.2) = 3 32 10.89 -27 44 15.4
  Extent = 0.9" x 0.8", rotation angle = 85 degrees
  Source counts = 45.0 +/- 6.9
  Background counts = 3.0
  Rate = 0.0007 +/- 0.0001

[Tue Jan 17 18:24:51 2012] Off-axis axis estimate = 5.24'
[Tue Jan 17 19:26:27 2012] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 19:26:27 2012] Initial guess for spatial extent in simple fitting = 1.28"
[Tue Jan 17 19:26:27 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Tue Jan 17 19:26:27 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 1.28"
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src3.ximg exists
[Tue Jan 17 19:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Jan 17 19:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 19:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 19:41:13 2012] Fit fullrun_ccd2_acisf12054_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 20:04:18 2012] Spatial fit model total counts = 51.467200, observed total counts = 51.000000
[Tue Jan 17 20:04:18 2012] Offset between fit and detection position for source 6 = 0.831477 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.831477 pixels
  Position = (480.7, 1022.1) = 3 32 10.91 -27 44 15.2
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 51.2 +/- 7.2
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Tue Jan 17 20:04:18 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 20:04:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 20:04:18 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 20:04:18 2012] Source does appear to be extended
[Tue Jan 17 20:04:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 20:53:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 20:53:59 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Tue Jan 17 20:53:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.140
[Tue Jan 17 20:53:59 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.14"
[Tue Jan 17 21:06:58 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass1_src3.ximg exists
[Tue Jan 17 21:06:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12054_pi14-548_cl_pass1_src3.csv
[Tue Jan 17 21:06:58 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Jan 17 21:06:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12054_pi14-548_cl_pass1_src3.csv
[Tue Jan 17 21:06:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12054_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12054_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 21:06:58 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 21:06:58 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 21:06:58 2012] Fit fullrun_ccd2_acisf12054_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 21:31:22 2012] Spatial fit model total counts = 49.518700, observed total counts = 51.000000
[Tue Jan 17 21:31:22 2012] Offset between fit and detection position for source 6 = 0.107195 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.107195 pixels
  Position = (480.8, 1022.2) = 3 32 10.91 -27 44 15.2
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 49.0 +/- 7.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Tue Jan 17 21:31:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 21:31:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 21:31:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 21:31:22 2012] Source does appear to be extended
[Tue Jan 17 21:31:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 21:51:26 2012] Writing source region out to fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6_src.reg
[Tue Jan 17 21:51:26 2012] Extracting stamp from image fullrun_ccd2_acisf12054_pi14-548_cl_sm2.00.img.gz, (430, 971) - (532, 1073)
[Tue Jan 17 21:51:26 2012] Writing fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6.gif
[Tue Jan 17 21:52:35 2012] Size of ../../acisf12054/products/events/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6_src.evt.gz[events] = 52 counts
[Tue Jan 17 21:52:35 2012] Mean chipx,y = (143.23, 408.04)
[Tue Jan 17 21:52:35 2012] Mean tdetx,y = (3469.04, 3942.77)
[Tue Jan 17 21:52:35 2012] chipx,y range = (122.00-160.00, 390.00-426.00)
[Tue Jan 17 21:52:35 2012] Size of ../../acisf12054/products/events/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 53 counts
[Tue Jan 17 21:52:36 2012] Not generating rmf since there are only 49 counts
[Tue Jan 17 21:52:36 2012] arf not found, will run specextract
[Tue Jan 17 21:53:00 2012] ../../acisf12054/products/spectra/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6.warf not found
[Tue Jan 17 21:53:00 2012] ../../acisf12054/products/spectra/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6.wrmf not found
[Tue Jan 17 21:53:00 2012] Removal of ../../acisf12054/products/spectra/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6.soff failed
[Tue Jan 17 22:07:42 2012] Spectrum 6 has only 49 counts, deleting rmf
[Tue Jan 17 22:07:42 2012] 162.768
[Tue Jan 17 22:28:47 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:28:47 2012] Error reading totcts from fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Jan 17 22:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:28:47 2012] Using photon index=1.80, rate=0.000804, arf fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6.arf
[Tue Jan 17 22:28:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 22:28:47 2012] Updating source flux to 1.2e-14
[Tue Jan 17 22:29:13 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 22:29:14 2012] acisf12054/analysis//spectral/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete