[Tue Jan 17 18:24:51 2012] Detection parameters:
  Position = (967.9, 674.6) = 3 31 52.82 -27 47 5.7
  Extent = 1.3" x 0.8", rotation angle = 160 degrees
  Source counts = 10.5 +/- 3.7
  Background counts = 3.5
  Rate = 0.0002 +/- 6e-05

[Tue Jan 17 18:24:51 2012] Off-axis axis estimate = 7.62'
[Tue Jan 17 19:26:27 2012] Using EEF radius (= 2.57 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 19:26:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 19:26:27 2012] Initial guess for spatial extent in simple fitting = 2.57"
[Tue Jan 17 19:26:27 2012] source mask rpix=5.2, npix_max = 131, mask sum = 132, frac = 1.004
[Tue Jan 17 19:26:27 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 2.57"
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src15.ximg exists
[Tue Jan 17 19:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src15.csv
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src15_1.ximg exists
[Tue Jan 17 19:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src15.csv
[Tue Jan 17 19:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12054_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Tue Jan 17 19:41:13 2012] fullrun_ccd2_acisf12054_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jan 17 19:41:13 2012] Fit fullrun_ccd2_acisf12054_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jan 17 20:04:18 2012] Spatial fit model total counts = 22.958100, observed total counts = 23.000000
[Tue Jan 17 20:04:18 2012] Offset between fit and detection position for source 16 = 2.601850 pixels
[Tue Jan 17 20:04:18 2012] 22.930140 total counts/ 14.614300 bgd. counts: snr = 2.175290
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.601850 pixels
  Position = (970.4, 674.1) = 3 31 52.75 -27 47 6.2
  Extent = 0.6" x 0.6", rotation angle = 0
  Source counts = 8.3 +/- 4.8
  Background counts = 14.6
  Rate = 0.0001 +/- 8e-05
[Tue Jan 17 20:04:18 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 20:04:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 20:04:18 2012] Assessing source extent using major
[Tue Jan 17 20:04:18 2012] Source does appear to be extended
[Tue Jan 17 20:04:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 20:53:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 20:53:59 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Jan 17 20:53:59 2012] Spatial fitting skipped for pass 1: source                                 has 8.3 net counts, is at off-axis angle 7.6'
[Tue Jan 17 21:31:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 21:31:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 21:31:22 2012] Assessing source extent using major
[Tue Jan 17 21:31:22 2012] Source does appear to be extended
[Tue Jan 17 21:31:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 21:51:26 2012] Writing source region out to fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16_src.reg
[Tue Jan 17 21:51:26 2012] Extracting stamp from image fullrun_ccd2_acisf12054_pi14-548_cl_sm2.00.img.gz, (941, 645) - (1000, 704)
[Tue Jan 17 21:51:26 2012] Writing fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16.gif
[Tue Jan 17 21:59:31 2012] Size of ../../acisf12054/products/events/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16_src.evt.gz[events] = 10 counts
[Tue Jan 17 21:59:31 2012] Mean chipx,y = (756.00, 399.60)
[Tue Jan 17 21:59:31 2012] Mean tdetx,y = (3460.60, 3330.00)
[Tue Jan 17 21:59:31 2012] chipx,y range = (729.00-759.00, 382.00-403.00)
[Tue Jan 17 21:59:31 2012] Size of ../../acisf12054/products/events/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 16 counts
[Tue Jan 17 21:59:32 2012] Not generating rmf since there are only 8 counts
[Tue Jan 17 21:59:32 2012] arf not found, will run specextract
[Tue Jan 17 22:00:03 2012] ../../acisf12054/products/spectra/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16.warf not found
[Tue Jan 17 22:00:03 2012] ../../acisf12054/products/spectra/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16.wrmf not found
[Tue Jan 17 22:00:03 2012] Removal of ../../acisf12054/products/spectra/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16.soff failed
[Tue Jan 17 22:07:42 2012] Spectrum 16 has only 8 counts, deleting rmf
[Tue Jan 17 22:07:42 2012] 165.513
[Tue Jan 17 22:28:47 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:28:47 2012] Error reading totcts from fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16_src.pi.gz
[Tue Jan 17 22:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:28:47 2012] Using photon index=1.80, rate=0.000136, arf fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16.arf
[Tue Jan 17 22:28:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 22:28:47 2012] Updating source flux to 2e-15
[Tue Jan 17 22:29:13 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 22:29:14 2012] acisf12054/analysis//spectral/fullrun_ccd2_acisf12054_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete