[Tue Jan 17 18:24:44 2012] Detection parameters:
  Position = (579.3, 941.7) = 3 32 38.14 -27 39 45.1
  Extent = 1.4" x 1.0", rotation angle = 127 degrees
  Source counts = 252.2 +/- 17.1
  Background counts = 39.8
  Rate = 0.004 +/- 0.0003

[Tue Jan 17 18:24:45 2012] Off-axis axis estimate = 8.70'
[Tue Jan 17 18:27:36 2012] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 18:27:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 18:27:36 2012] Initial guess for spatial extent in simple fitting = 3.35"
[Tue Jan 17 18:27:36 2012] source mask rpix=6.8, npix_max = 213, mask sum = 225, frac = 1.055
[Tue Jan 17 18:27:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.35"
[Tue Jan 17 19:00:51 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 19:00:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12054_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 19:00:51 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 19:00:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12054_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 19:00:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12054_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12054_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 19:00:51 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 19:00:51 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 19:00:51 2012] Fit fullrun_ccd0_acisf12054_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 20:04:14 2012] Spatial fit model total counts = 339.119000, observed total counts = 338.000000
[Tue Jan 17 20:04:14 2012] Offset between fit and detection position for source 1 = 1.429547 pixels
[Tue Jan 17 20:04:14 2012] 339.229000 total counts/ 68.678000 bgd. counts: snr = 32.646778
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.429547 pixels
  Position = (580.2, 942.8) = 3 32 38.12 -27 39 44.8
  Extent = 3.2 (2.9-3.5)", rotation angle = 0
  Source counts = 270.6 +/- 18.4
  Background counts = 68.7
  Rate = 0.004 +/- 0.0003
[Tue Jan 17 20:04:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 20:04:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 20:04:14 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 20:04:14 2012] Source does appear to be extended
[Tue Jan 17 20:04:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 20:04:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 20:04:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 20:04:39 2012] Initial guess for spatial extent in simple fitting = 3.22"
[Tue Jan 17 20:04:39 2012] source mask rpix=6.5, npix_max = 198, mask sum = 196, frac = 0.988
[Tue Jan 17 20:04:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.22"
[Tue Jan 17 20:29:44 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 20:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12054_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 20:29:44 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 20:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12054_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 20:29:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12054_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12054_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 20:29:44 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 20:29:44 2012] fullrun_ccd0_acisf12054_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 20:29:44 2012] Fit fullrun_ccd0_acisf12054_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 21:31:19 2012] Spatial fit model total counts = 331.000000, observed total counts = 331.000000
[Tue Jan 17 21:31:19 2012] Offset between fit and detection position for source 1 = 0.057024 pixels
[Tue Jan 17 21:31:19 2012] 331.171800 total counts/ 58.714800 bgd. counts: snr = 35.556924
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057024 pixels
  Position = (580.3, 942.8) = 3 32 38.12 -27 39 44.8
  Extent = 3.2 (2.9-3.6)", rotation angle = 0
  Source counts = 272.5 +/- 18.2
  Background counts = 58.7
  Rate = 0.004 +/- 0.0003
[Tue Jan 17 21:31:19 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 21:31:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 21:31:19 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 21:31:19 2012] Source does appear to be extended
[Tue Jan 17 21:31:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 21:31:44 2012] Writing source region out to fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1_src.reg
[Tue Jan 17 21:31:44 2012] Extracting stamp from image fullrun_ccd0_acisf12054_pi14-548_cl_sm2.00.img.gz, (432, 795) - (728, 1091)
[Tue Jan 17 21:31:44 2012] Writing fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1.gif
[Tue Jan 17 21:31:46 2012] Size of ../../acisf12054/products/events/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1_src.evt.gz[events] = 321 counts
[Tue Jan 17 21:31:46 2012] Mean chipx,y = (268.62, 409.82)
[Tue Jan 17 21:31:46 2012] Mean tdetx,y = (3470.82, 4863.38)
[Tue Jan 17 21:31:46 2012] chipx,y range = (231.00-299.00, 374.00-438.00)
[Tue Jan 17 21:31:46 2012] Size of ../../acisf12054/products/events/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 460 counts
[Tue Jan 17 21:31:47 2012] rmf not found, will run specextract
[Tue Jan 17 21:31:47 2012] arf not found, will run specextract
[Tue Jan 17 21:32:13 2012] ../../acisf12054/products/spectra/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1.warf not found
[Tue Jan 17 21:32:13 2012] ../../acisf12054/products/spectra/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jan 17 21:32:13 2012] Removal of ../../acisf12054/products/spectra/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1.soff failed
[Tue Jan 17 21:42:55 2012] Keeping rmf generated by specextract
[Tue Jan 17 21:42:55 2012] 158.039
[Tue Jan 17 22:28:46 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:28:46 2012] Error reading totcts from fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jan 17 22:28:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:28:46 2012] Using photon index=1.80, rate=0.00447, arf fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 22:28:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 22:28:46 2012] Updating source flux to 6.9e-14
[Tue Jan 17 22:29:07 2012] Reading fit data from acisf12054/analysis//spectral/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1_pl.csv
[Tue Jan 17 22:29:07 2012] Spectral fit parameter nH value = 4.51419e+14
[Tue Jan 17 22:29:07 2012] Spectral fit parameter PhoIndex value = 2.21714
[Tue Jan 17 22:29:07 2012] Failed to get F(0.3-8.0) from acisf12054/analysis//spectral/fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 22:29:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:29:07 2012] Using Nh = 4.5e+14, photon index=2.22, rate=0.00447, arf fullrun_ccd0_acisf12054_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 22:29:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 22:29:07 2012] Updating source flux to 7e-14