[Thu Jan 19 08:23:40 2012] Detection parameters:
  Position = (658.5, 517.2) = 3 32 34.91 -27 55 11.3
  Extent = 1.9" x 1.1", rotation angle = 15 degrees
  Source counts = 33.4 +/- 6.7
  Background counts = 11.6
  Rate = 0.0003 +/- 6e-05

[Thu Jan 19 08:23:41 2012] Off-axis axis estimate = 7.19'
[Thu Jan 19 09:54:37 2012] Using EEF radius (= 2.29 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 09:54:37 2012] Initial guess for spatial extent in simple fitting = 2.29"
[Thu Jan 19 09:54:37 2012] source mask rpix=4.7, npix_max = 106, mask sum = 110, frac = 1.033
[Thu Jan 19 09:54:37 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 2.29"
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src9.ximg exists
[Thu Jan 19 10:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src9.csv
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Jan 19 10:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src9.csv
[Thu Jan 19 10:20:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jan 19 10:20:40 2012] Fit fullrun_ccd3_acisf12052_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jan 19 10:20:57 2012] Spatial fit model total counts = 64.881400, observed total counts = 58.000000
[Thu Jan 19 10:20:57 2012] Offset between fit and detection position for source 7 = 1.102610 pixels
[Thu Jan 19 10:20:57 2012] 63.693800 total counts/ 35.429100 bgd. counts: snr = 4.748586
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.102610 pixels
  Position = (659.6, 517.2) = 3 32 34.89 -27 55 11.6
  Extent = 2.1" x 0.8", rotation angle = 359
  Source counts = 28.3 +/- 8.0
  Background counts = 35.4
  Rate = 0.0003 +/- 7e-05
[Thu Jan 19 10:20:57 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:57 2012] Assessing source extent using major
[Thu Jan 19 10:20:57 2012] Source does appear to be extended
[Thu Jan 19 10:20:57 2012] Computing asymmetry using major and minor axis, asym = 2.77
[Thu Jan 19 10:20:57 2012] Source is asymmetric
[Thu Jan 19 11:51:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 11:51:19 2012] Initial guess for spatial extent in simple fitting = 1.46"
[Thu Jan 19 11:51:19 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.022
[Thu Jan 19 11:51:19 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 1.46"
[Thu Jan 19 12:11:37 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src9.ximg exists
[Thu Jan 19 12:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src9.csv
[Thu Jan 19 12:11:37 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Jan 19 12:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src9.csv
[Thu Jan 19 12:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 12:11:38 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Jan 19 12:11:38 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jan 19 12:11:38 2012] Fit fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jan 19 12:11:53 2012] Source 7 is offset by 3.325921 and 0.219483 pixels which is larger than
2 X fitted extent = 2.306240 x 2.306240, not incorporating fit results
[Thu Jan 19 12:11:53 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:53 2012] Assessing source extent using major
[Thu Jan 19 12:11:53 2012] Source does appear to be extended
[Thu Jan 19 12:11:53 2012] Computing asymmetry using major and minor axis, asym = 2.77
[Thu Jan 19 12:11:53 2012] Source is asymmetric
[Thu Jan 19 13:02:52 2012] Writing source region out to fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7_src.reg
[Thu Jan 19 13:02:52 2012] Extracting stamp from image fullrun_ccd3_acisf12052_pi14-548_cl_sm2.00.img.gz, (562, 419) - (758, 615)
[Thu Jan 19 13:02:52 2012] Writing fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7.gif
[Thu Jan 19 13:07:04 2012] Size of ../../acisf12052/products/events/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7_src.evt.gz[events] = 40 counts
[Thu Jan 19 13:07:04 2012] Mean chipx,y = (373.50, 356.20)
[Thu Jan 19 13:07:04 2012] Mean tdetx,y = (4775.80, 3434.50)
[Thu Jan 19 13:07:04 2012] chipx,y range = (352.00-394.00, 331.00-380.00)
[Thu Jan 19 13:07:04 2012] Size of ../../acisf12052/products/events/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 398 counts
[Thu Jan 19 13:07:05 2012] Not generating rmf since there are only 28 counts
[Thu Jan 19 13:07:05 2012] arf not found, will run specextract
[Thu Jan 19 13:07:27 2012] ../../acisf12052/products/spectra/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7.warf not found
[Thu Jan 19 13:07:27 2012] ../../acisf12052/products/spectra/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7.wrmf not found
[Thu Jan 19 13:07:27 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7.soff failed
[Thu Jan 19 13:15:14 2012] Spectrum 7 has only 28 counts, deleting rmf
[Thu Jan 19 13:15:14 2012] 172.993
[Thu Jan 19 13:17:56 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:56 2012] Error reading totcts from fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7_src.pi.gz
[Thu Jan 19 13:17:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:56 2012] Using photon index=1.80, rate=0.000256, arf fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src7.arf
[Thu Jan 19 13:17:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:56 2012] Updating source flux to 3.6e-15
[Thu Jan 19 13:18:30 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Thu Jan 19 13:18:30 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting