[Thu Jan 19 08:23:40 2012] Detection parameters:
  Position = (1106.4, 821.3) = 3 32 18.28 -27 52 41.7
  Extent = 0.6" x 0.5", rotation angle = 29 degrees
  Source counts = 12.1 +/- 3.7
  Background counts = 1.9
  Rate = 0.0001 +/- 3e-05

[Thu Jan 19 08:23:41 2012] Off-axis axis estimate = 4.83'
[Thu Jan 19 09:54:37 2012] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 09:54:37 2012] Initial guess for spatial extent in simple fitting = 1.11"
[Thu Jan 19 09:54:37 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.819
[Thu Jan 19 09:54:37 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 1.11"
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src18.ximg exists
[Thu Jan 19 10:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src18.csv
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src18_1.ximg exists
[Thu Jan 19 10:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src18.csv
[Thu Jan 19 10:20:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12052_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Thu Jan 19 10:20:40 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jan 19 10:20:40 2012] Fit fullrun_ccd3_acisf12052_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Jan 19 10:20:57 2012] Spatial fit model total counts = 17.969800, observed total counts = 19.000000
[Thu Jan 19 10:20:57 2012] Offset between fit and detection position for source 16 = 1.709778 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.709778 pixels
  Position = (1108.0, 821.9) = 3 32 18.24 -27 52 41.6
  Extent = 1.4 (1.0-2.2)" x 0.6 (0.4-0.9)", rotation angle = 348 (330-2) degrees
  Source counts = 17.2 +/- 4.1
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Thu Jan 19 10:20:57 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:57 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:57 2012] Source does appear to be extended
[Thu Jan 19 10:20:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Thu Jan 19 11:51:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 11:51:19 2012] Initial guess for spatial extent in simple fitting = 1.01"
[Thu Jan 19 11:51:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.150
[Thu Jan 19 11:51:19 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 1.01"
[Thu Jan 19 12:11:38 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src18.ximg exists
[Thu Jan 19 12:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src18.csv
[Thu Jan 19 12:11:38 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src18_1.ximg exists
[Thu Jan 19 12:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src18.csv
[Thu Jan 19 12:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12052_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 12:11:38 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Thu Jan 19 12:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src18.csv
[Thu Jan 19 12:11:38 2012] fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jan 19 12:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src18.csv
[Thu Jan 19 12:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12052_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 12:11:53 2012] Spatial fit model total counts = 24.542400, observed total counts = 21.000000
[Thu Jan 19 12:11:53 2012] Offset between fit and detection position for source 16 = 0.187290 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.187290 pixels
  Position = (1107.9, 822.0) = 3 32 18.25 -27 52 41.6
  Extent = 1.9" x 0.7", rotation angle = 353
  Source counts = 23.1 +/- 4.8
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Thu Jan 19 12:11:53 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:53 2012] Assessing source extent using major
[Thu Jan 19 12:11:53 2012] Source does appear to be extended
[Thu Jan 19 12:11:53 2012] Computing asymmetry using major and minor axis, asym = 2.95
[Thu Jan 19 12:11:53 2012] Source is asymmetric
[Thu Jan 19 13:02:52 2012] Writing source region out to fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16_src.reg
[Thu Jan 19 13:02:52 2012] Extracting stamp from image fullrun_ccd3_acisf12052_pi14-548_cl_sm2.00.img.gz, (1020, 734) - (1196, 910)
[Thu Jan 19 13:02:52 2012] Writing fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16.gif
[Thu Jan 19 13:11:59 2012] Size of ../../acisf12052/products/events/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16_src.evt.gz[events] = 23 counts
[Thu Jan 19 13:11:59 2012] Mean chipx,y = (366.35, 905.09)
[Thu Jan 19 13:11:59 2012] Mean tdetx,y = (4226.91, 3427.35)
[Thu Jan 19 13:11:59 2012] chipx,y range = (343.00-386.00, 884.00-921.00)
[Thu Jan 19 13:11:59 2012] Size of ../../acisf12052/products/events/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 323 counts
[Thu Jan 19 13:12:00 2012] Not generating rmf since there are only 23 counts
[Thu Jan 19 13:12:00 2012] arf not found, will run specextract
[Thu Jan 19 13:12:35 2012] ../../acisf12052/products/spectra/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16.warf not found
[Thu Jan 19 13:12:35 2012] ../../acisf12052/products/spectra/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16.wrmf not found
[Thu Jan 19 13:12:35 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16.soff failed
[Thu Jan 19 13:15:14 2012] Spectrum 16 has only 23 counts, deleting rmf
[Thu Jan 19 13:15:14 2012] 180.75
[Thu Jan 19 13:17:56 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:56 2012] Error reading totcts from fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16_src.pi.gz
[Thu Jan 19 13:17:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:56 2012] Using photon index=1.80, rate=0.000209, arf fullrun_ccd3_acisf12052_pi14-548_pass1_cl_src16.arf
[Thu Jan 19 13:17:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:56 2012] Updating source flux to 2.8e-15
[Thu Jan 19 13:18:30 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting