[Thu Jan 19 08:23:37 2012] Detection parameters:
  Position = (434.0, 291.5) = 3 32 11.36 -27 52 13.5
  Extent = 0.5" x 0.5", rotation angle = 109 degrees
  Source counts = 22.4 +/- 5.0
  Background counts = 2.6
  Rate = 0.0002 +/- 5e-05

[Thu Jan 19 08:23:38 2012] Off-axis axis estimate = 5.23'
[Thu Jan 19 09:32:13 2012] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 09:32:13 2012] Initial guess for spatial extent in simple fitting = 1.28"
[Thu Jan 19 09:32:13 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.097
[Thu Jan 19 09:32:13 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 1.28"
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src9.ximg exists
[Thu Jan 19 09:54:37 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src9.csv
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Jan 19 09:54:37 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src9.csv
[Thu Jan 19 09:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jan 19 09:54:37 2012] Fit fullrun_ccd2_acisf12052_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jan 19 10:20:54 2012] Spatial fit model total counts = 39.860300, observed total counts = 41.000000
[Thu Jan 19 10:20:54 2012] Offset between fit and detection position for source 20 = 0.230891 pixels
[Thu Jan 19 10:20:54 2012] 38.415400 total counts/ 0.000000 bgd. counts: snr = 1260306665240185.250000
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.230891 pixels
  Position = (434.2, 291.6) = 3 32 11.37 -27 52 13.7
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 38.4 +/- 6.2
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Thu Jan 19 10:20:54 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:54 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:54 2012] Source does appear to be extended
[Thu Jan 19 10:20:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 11:31:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 11:31:16 2012] Initial guess for spatial extent in simple fitting = 1.23"
[Thu Jan 19 11:31:16 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu Jan 19 11:31:16 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 1.23"
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src9.ximg exists
[Thu Jan 19 11:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src9.csv
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Jan 19 11:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src9.csv
[Thu Jan 19 11:51:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jan 19 11:51:19 2012] Fit fullrun_ccd2_acisf12052_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jan 19 12:11:51 2012] Spatial fit model total counts = 37.842200, observed total counts = 41.000000
[Thu Jan 19 12:11:51 2012] Offset between fit and detection position for source 20 = 0.169762 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.169762 pixels
  Position = (434.0, 291.6) = 3 32 11.38 -27 52 13.7
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 36.3 +/- 6.0
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Thu Jan 19 12:11:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:51 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 12:11:51 2012] Source does appear to be extended
[Thu Jan 19 12:11:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 12:41:03 2012] Writing source region out to fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20_src.reg
[Thu Jan 19 12:41:03 2012] Extracting stamp from image fullrun_ccd2_acisf12052_pi14-548_cl_sm2.00.img.gz, (377, 235) - (491, 348)
[Thu Jan 19 12:41:03 2012] Writing fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20.gif
[Thu Jan 19 12:46:02 2012] Size of ../../acisf12052/products/events/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20_src.evt.gz[events] = 43 counts
[Thu Jan 19 12:46:02 2012] Mean chipx,y = (711.70, 979.86)
[Thu Jan 19 12:46:02 2012] Mean tdetx,y = (4040.86, 3374.30)
[Thu Jan 19 12:46:02 2012] chipx,y range = (693.00-731.00, 962.00-1001.00)
[Thu Jan 19 12:46:02 2012] Size of ../../acisf12052/products/events/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 126 counts
[Thu Jan 19 12:46:03 2012] Not generating rmf since there are only 36 counts
[Thu Jan 19 12:46:03 2012] arf not found, will run specextract
[Thu Jan 19 12:46:41 2012] ../../acisf12052/products/spectra/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20.warf not found
[Thu Jan 19 12:46:41 2012] ../../acisf12052/products/spectra/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20.wrmf not found
[Thu Jan 19 12:46:41 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20.soff failed
[Thu Jan 19 13:02:51 2012] Spectrum 20 has only 36 counts, deleting rmf
[Thu Jan 19 13:02:51 2012] 172.767
[Thu Jan 19 13:17:55 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:55 2012] Error reading totcts from fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20_src.pi.gz
[Thu Jan 19 13:17:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:56 2012] Using photon index=1.80, rate=0.000329, arf fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src20.arf
[Thu Jan 19 13:17:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:56 2012] Updating source flux to 4.5e-15
[Thu Jan 19 13:18:25 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting