[Thu Jan 19 08:23:36 2012] Detection parameters:
  Position = (506.8, 858.3) = 3 32 8.67 -27 47 34.7
  Extent = 0.7" x 0.5", rotation angle = 55 degrees
  Source counts = 683.5 +/- 26.4
  Background counts = 14.5
  Rate = 0.006 +/- 0.0002

[Thu Jan 19 08:23:38 2012] Off-axis axis estimate = 4.04'
[Thu Jan 19 09:32:13 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 09:32:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 09:32:13 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Thu Jan 19 09:32:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Thu Jan 19 09:32:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.84"
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src1.ximg exists
[Thu Jan 19 09:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jan 19 09:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 09:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12052_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 19 09:54:37 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 19 09:54:37 2012] Fit fullrun_ccd2_acisf12052_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 19 10:20:54 2012] Spatial fit model total counts = 696.062000, observed total counts = 694.000000
[Thu Jan 19 10:20:54 2012] Offset between fit and detection position for source 1 = 0.677217 pixels
[Thu Jan 19 10:20:54 2012] 696.513600 total counts/ 40.985600 bgd. counts: snr = 102.394257
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.677217 pixels
  Position = (507.3, 858.7) = 3 32 8.67 -27 47 34.7
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 655.5 +/- 26.4
  Background counts = 41.0
  Rate = 0.006 +/- 0.0002
[Thu Jan 19 10:20:54 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:54 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:54 2012] Source does appear to be extended
[Thu Jan 19 10:20:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 11:31:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 11:31:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 11:31:16 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Thu Jan 19 11:31:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.232
[Thu Jan 19 11:31:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.86"
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src1.ximg exists
[Thu Jan 19 11:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jan 19 11:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 11:51:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12052_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 19 11:51:19 2012] fullrun_ccd2_acisf12052_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 19 11:51:19 2012] Fit fullrun_ccd2_acisf12052_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 19 12:11:51 2012] Spatial fit model total counts = 692.757000, observed total counts = 696.000000
[Thu Jan 19 12:11:51 2012] Offset between fit and detection position for source 1 = 0.004470 pixels
[Thu Jan 19 12:11:51 2012] 693.019900 total counts/ 43.560900 bgd. counts: snr = 98.401862
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004470 pixels
  Position = (507.3, 858.7) = 3 32 8.67 -27 47 34.7
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 649.5 +/- 26.3
  Background counts = 43.6
  Rate = 0.006 +/- 0.0002
[Thu Jan 19 12:11:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:51 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 12:11:51 2012] Source does appear to be extended
[Thu Jan 19 12:11:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 12:41:03 2012] Writing source region out to fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1_src.reg
[Thu Jan 19 12:41:03 2012] Extracting stamp from image fullrun_ccd2_acisf12052_pi14-548_cl_sm2.00.img.gz, (468, 819) - (547, 898)
[Thu Jan 19 12:41:03 2012] Writing fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1.gif
[Thu Jan 19 12:41:06 2012] Size of ../../acisf12052/products/events/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1_src.evt.gz[events] = 681 counts
[Thu Jan 19 12:41:06 2012] Mean chipx,y = (283.52, 602.46)
[Thu Jan 19 12:41:06 2012] Mean tdetx,y = (3663.46, 3802.48)
[Thu Jan 19 12:41:06 2012] chipx,y range = (262.00-305.00, 580.00-624.00)
[Thu Jan 19 12:41:06 2012] Size of ../../acisf12052/products/events/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 82 counts
[Thu Jan 19 12:41:07 2012] rmf not found, will run specextract
[Thu Jan 19 12:41:07 2012] arf not found, will run specextract
[Thu Jan 19 12:41:40 2012] ../../acisf12052/products/spectra/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1.warf not found
[Thu Jan 19 12:41:40 2012] ../../acisf12052/products/spectra/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jan 19 12:41:40 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1.soff failed
[Thu Jan 19 13:02:51 2012] Keeping rmf generated by specextract
[Thu Jan 19 13:02:51 2012] 187.44
[Thu Jan 19 13:17:55 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:55 2012] Error reading totcts from fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jan 19 13:17:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:56 2012] Using photon index=1.80, rate=0.00588, arf fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 13:17:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:56 2012] Updating source flux to 7.4e-14
[Thu Jan 19 13:18:29 2012] Reading fit data from acisf12052/analysis//spectral/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1_pl.csv
[Thu Jan 19 13:18:29 2012] Spectral fit parameter nH value = 6.14359e+19
[Thu Jan 19 13:18:29 2012] Spectral fit parameter PhoIndex value = 1.71618
[Thu Jan 19 13:18:29 2012] Failed to get F(0.3-8.0) from acisf12052/analysis//spectral/fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jan 19 13:18:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:18:29 2012] Using Nh = 6.1e+19, photon index=1.72, rate=0.00588, arf fullrun_ccd2_acisf12052_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 13:18:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:18:29 2012] Updating source flux to 7.6e-14