[Thu Jan 19 08:23:35 2012] Detection parameters:
  Position = (998.5, 310.9) = 3 32 44.47 -27 49 40.3
  Extent = 0.6" x 0.5", rotation angle = 174 degrees
  Source counts = 19.9 +/- 4.7
  Background counts = 2.1
  Rate = 0.0002 +/- 4e-05

[Thu Jan 19 08:23:35 2012] Off-axis axis estimate = 4.19'
[Thu Jan 19 08:56:45 2012] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 08:56:45 2012] Initial guess for spatial extent in simple fitting = 0.89"
[Thu Jan 19 08:56:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Thu Jan 19 08:56:45 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 0.89"
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src16.ximg exists
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src16_1.ximg exists
[Thu Jan 19 09:32:13 2012] Fit fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src16 appears to have run properly
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Thu Jan 19 09:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src16.csv
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Jan 19 09:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src16.csv
[Thu Jan 19 09:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 10:20:51 2012] Spatial fit model total counts = 22.818600, observed total counts = 27.000000
[Thu Jan 19 10:20:51 2012] Offset between fit and detection position for source 40 = 0.796116 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.796116 pixels
  Position = (999.2, 311.4) = 3 32 44.46 -27 49 40.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 21.8 +/- 4.7
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Thu Jan 19 10:20:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:51 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:51 2012] Source does appear to be extended
[Thu Jan 19 10:20:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 10:54:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 10:54:30 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Thu Jan 19 10:54:30 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.988
[Thu Jan 19 10:54:30 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 0.61"
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src16.ximg exists
[Thu Jan 19 11:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src16.csv
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src16_1.ximg exists
[Thu Jan 19 11:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src16.csv
[Thu Jan 19 11:31:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jan 19 11:31:15 2012] Fit fullrun_ccd1_acisf12052_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Jan 19 12:11:48 2012] Spatial fit model total counts = 26.301200, observed total counts = 27.000000
[Thu Jan 19 12:11:48 2012] Offset between fit and detection position for source 40 = 0.143862 pixels
[Thu Jan 19 12:11:48 2012] 26.793530 total counts/ 6.297030 bgd. counts: snr = 8.167927
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.143862 pixels
  Position = (999.0, 311.4) = 3 32 44.47 -27 49 40.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 20.5 +/- 5.2
  Background counts = 6.3
  Rate = 0.0002 +/- 5e-05
[Thu Jan 19 12:11:48 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:48 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 12:11:48 2012] Source does appear to be extended
[Thu Jan 19 12:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 12:28:44 2012] Writing source region out to fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40_src.reg
[Thu Jan 19 12:28:44 2012] Extracting stamp from image fullrun_ccd1_acisf12052_pi14-548_cl_sm2.00.img.gz, (973, 285) - (1025, 338)
[Thu Jan 19 12:28:44 2012] Writing fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40.gif
[Thu Jan 19 12:36:35 2012] Size of ../../acisf12052/products/events/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40_src.evt.gz[events] = 22 counts
[Thu Jan 19 12:36:35 2012] Mean chipx,y = (33.55, 528.59)
[Thu Jan 19 12:36:35 2012] Mean tdetx,y = (4603.41, 4140.55)
[Thu Jan 19 12:36:35 2012] chipx,y range = (11.00-47.00, 509.00-542.00)
[Thu Jan 19 12:36:35 2012] Size of ../../acisf12052/products/events/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 27 counts
[Thu Jan 19 12:36:36 2012] Not generating rmf since there are only 20 counts
[Thu Jan 19 12:36:36 2012] arf not found, will run specextract
[Thu Jan 19 12:36:58 2012] ../../acisf12052/products/spectra/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40.warf not found
[Thu Jan 19 12:36:58 2012] ../../acisf12052/products/spectra/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40.wrmf not found
[Thu Jan 19 12:36:58 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40.soff failed
[Thu Jan 19 12:41:03 2012] Spectrum 40 has only 20 counts, deleting rmf
[Thu Jan 19 12:41:03 2012] 194.943
[Thu Jan 19 13:17:55 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:55 2012] Error reading totcts from fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40_src.pi.gz
[Thu Jan 19 13:17:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:55 2012] Using photon index=1.80, rate=0.000186, arf fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src40.arf
[Thu Jan 19 13:17:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:55 2012] Updating source flux to 2.3e-15
[Thu Jan 19 13:18:19 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting