[Thu Jan 19 08:23:33 2012] Detection parameters:
  Position = (905.8, 1179.1) = 3 32 47.88 -27 42 33.1
  Extent = 1.9" x 1.6", rotation angle = 133 degrees
  Source counts = 294.1 +/- 18.2
  Background counts = 36.9
  Rate = 0.003 +/- 0.0002

[Thu Jan 19 08:23:35 2012] Off-axis axis estimate = 7.37'
[Thu Jan 19 08:56:45 2012] Using EEF radius (= 2.41 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 08:56:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 08:56:45 2012] Initial guess for spatial extent in simple fitting = 2.41"
[Thu Jan 19 08:56:45 2012] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.944
[Thu Jan 19 08:56:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.41"
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src1.ximg exists
[Thu Jan 19 09:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jan 19 09:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 09:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12052_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 19 09:32:13 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 19 09:32:13 2012] Fit fullrun_ccd1_acisf12052_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 19 10:20:51 2012] Spatial fit model total counts = 361.000000, observed total counts = 361.000000
[Thu Jan 19 10:20:51 2012] Offset between fit and detection position for source 2 = 0.863742 pixels
[Thu Jan 19 10:20:51 2012] 360.335100 total counts/ 66.255100 bgd. counts: snr = 36.128991
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.863742 pixels
  Position = (906.5, 1179.6) = 3 32 47.88 -27 42 33.1
  Extent = 2.0 (1.9-2.2)", rotation angle = 0
  Source counts = 294.1 +/- 19.0
  Background counts = 66.3
  Rate = 0.003 +/- 0.0002
[Thu Jan 19 10:20:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:51 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:51 2012] Source does appear to be extended
[Thu Jan 19 10:20:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 10:54:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 10:54:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 10:54:30 2012] Initial guess for spatial extent in simple fitting = 2.02"
[Thu Jan 19 10:54:30 2012] source mask rpix=4.1, npix_max = 85, mask sum = 81, frac = 0.951
[Thu Jan 19 10:54:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.02"
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src1.ximg exists
[Thu Jan 19 11:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jan 19 11:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 11:31:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12052_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 19 11:31:15 2012] fullrun_ccd1_acisf12052_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 19 11:31:15 2012] Fit fullrun_ccd1_acisf12052_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 19 12:11:48 2012] Spatial fit model total counts = 339.223000, observed total counts = 341.000000
[Thu Jan 19 12:11:48 2012] Offset between fit and detection position for source 2 = 0.103441 pixels
[Thu Jan 19 12:11:48 2012] 337.852000 total counts/ 42.913000 bgd. counts: snr = 45.023346
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.103441 pixels
  Position = (906.5, 1179.7) = 3 32 47.88 -27 42 33.1
  Extent = 2.1 (1.9-2.2)", rotation angle = 0
  Source counts = 294.9 +/- 18.4
  Background counts = 42.9
  Rate = 0.003 +/- 0.0002
[Thu Jan 19 12:11:48 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:48 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 12:11:48 2012] Source does appear to be extended
[Thu Jan 19 12:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 12:28:44 2012] Writing source region out to fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2_src.reg
[Thu Jan 19 12:28:44 2012] Extracting stamp from image fullrun_ccd1_acisf12052_pi14-548_cl_sm2.00.img.gz, (812, 1086) - (1001, 1274)
[Thu Jan 19 12:28:44 2012] Writing fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2.gif
[Thu Jan 19 12:28:46 2012] Size of ../../acisf12052/products/events/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2_src.evt.gz[events] = 336 counts
[Thu Jan 19 12:28:46 2012] Mean chipx,y = (799.87, 938.83)
[Thu Jan 19 12:28:46 2012] Mean tdetx,y = (4193.17, 4906.87)
[Thu Jan 19 12:28:46 2012] chipx,y range = (772.00-829.00, 910.00-967.00)
[Thu Jan 19 12:28:46 2012] Size of ../../acisf12052/products/events/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 293 counts
[Thu Jan 19 12:28:47 2012] rmf not found, will run specextract
[Thu Jan 19 12:28:47 2012] arf not found, will run specextract
[Thu Jan 19 12:29:13 2012] ../../acisf12052/products/spectra/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2.warf not found
[Thu Jan 19 12:29:13 2012] ../../acisf12052/products/spectra/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2.wrmf not found
[Thu Jan 19 12:29:13 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2.soff failed
[Thu Jan 19 12:41:03 2012] Keeping rmf generated by specextract
[Thu Jan 19 12:41:03 2012] 176.786
[Thu Jan 19 13:17:55 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:55 2012] Error reading totcts from fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Jan 19 13:17:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:55 2012] Using photon index=1.80, rate=0.00267, arf fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2.arf
[Thu Jan 19 13:17:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:55 2012] Updating source flux to 3.6e-14
[Thu Jan 19 13:18:25 2012] Reading fit data from acisf12052/analysis//spectral/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2_pl.csv
[Thu Jan 19 13:18:25 2012] Spectral fit parameter nH value = 2.94704e+21
[Thu Jan 19 13:18:25 2012] Spectral fit parameter PhoIndex value = 1.61157
[Thu Jan 19 13:18:25 2012] Failed to get F(0.3-8.0) from acisf12052/analysis//spectral/fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Jan 19 13:18:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:18:25 2012] Using Nh = 2.9e+21, photon index=1.61, rate=0.00267, arf fullrun_ccd1_acisf12052_pi14-548_pass1_cl_src2.arf
[Thu Jan 19 13:18:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:18:25 2012] Updating source flux to 3.8e-14