[Thu Jan 19 08:23:31 2012] Detection parameters:
  Position = (872.9, 546.9) = 3 32 17.13 -27 43 3.8
  Extent = 1.3" x 0.8", rotation angle = 96 degrees
  Source counts = 113.0 +/- 11.0
  Background counts = 8.0
  Rate = 0.001 +/- 0.0001

[Thu Jan 19 08:23:32 2012] Off-axis axis estimate = 5.59'
[Thu Jan 19 08:27:10 2012] Using EEF radius (= 1.43 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 08:27:10 2012] Initial guess for spatial extent in simple fitting = 1.43"
[Thu Jan 19 08:27:10 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Thu Jan 19 08:27:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 1.43"
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src7.ximg exists
[Thu Jan 19 08:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src7.csv
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src7_1.ximg exists
[Thu Jan 19 08:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src7.csv
[Thu Jan 19 08:56:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jan 19 08:56:44 2012] Fit fullrun_ccd0_acisf12052_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jan 19 10:20:48 2012] Spatial fit model total counts = 127.487000, observed total counts = 122.000000
[Thu Jan 19 10:20:48 2012] Offset between fit and detection position for source 7 = 0.758481 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.758481 pixels
  Position = (873.4, 547.5) = 3 32 17.13 -27 43 3.8
  Extent = 1.4 (1.3-1.6)", rotation angle = 0
  Source counts = 126.1 +/- 11.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Thu Jan 19 10:20:48 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:48 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:48 2012] Source does appear to be extended
[Thu Jan 19 10:20:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 10:21:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 10:21:20 2012] Initial guess for spatial extent in simple fitting = 1.39"
[Thu Jan 19 10:21:20 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.109
[Thu Jan 19 10:21:20 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 1.39"
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src7.ximg exists
[Thu Jan 19 10:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src7.csv
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src7_1.ximg exists
[Thu Jan 19 10:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src7.csv
[Thu Jan 19 10:54:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jan 19 10:54:29 2012] Fit fullrun_ccd0_acisf12052_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Jan 19 12:11:45 2012] Spatial fit model total counts = 123.922000, observed total counts = 122.000000
[Thu Jan 19 12:11:45 2012] Offset between fit and detection position for source 7 = 0.043228 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.043228 pixels
  Position = (873.4, 547.5) = 3 32 17.13 -27 43 3.8
  Extent = 1.4 (1.3-1.5)", rotation angle = 0
  Source counts = 122.4 +/- 11.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Thu Jan 19 12:11:45 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:45 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 12:11:45 2012] Source does appear to be extended
[Thu Jan 19 12:11:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 12:12:15 2012] Writing source region out to fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7_src.reg
[Thu Jan 19 12:12:15 2012] Extracting stamp from image fullrun_ccd0_acisf12052_pi14-548_cl_sm2.00.img.gz, (809, 483) - (938, 612)
[Thu Jan 19 12:12:15 2012] Writing fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7.gif
[Thu Jan 19 12:15:28 2012] Size of ../../acisf12052/products/events/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7_src.evt.gz[events] = 138 counts
[Thu Jan 19 12:15:28 2012] Mean chipx,y = (745.27, 479.93)
[Thu Jan 19 12:15:28 2012] Mean tdetx,y = (3540.93, 4386.73)
[Thu Jan 19 12:15:28 2012] chipx,y range = (720.00-770.00, 452.00-501.00)
[Thu Jan 19 12:15:28 2012] Size of ../../acisf12052/products/events/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 156 counts
[Thu Jan 19 12:15:29 2012] rmf not found, will run specextract
[Thu Jan 19 12:15:29 2012] arf not found, will run specextract
[Thu Jan 19 12:15:53 2012] ../../acisf12052/products/spectra/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7.warf not found
[Thu Jan 19 12:15:53 2012] ../../acisf12052/products/spectra/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7.wrmf not found
[Thu Jan 19 12:15:53 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7.soff failed
[Thu Jan 19 12:28:43 2012] Keeping rmf generated by specextract
[Thu Jan 19 12:28:43 2012] 183.374
[Thu Jan 19 13:17:54 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:54 2012] Error reading totcts from fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7_src.pi.gz
[Thu Jan 19 13:17:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:54 2012] Using photon index=1.80, rate=0.00111, arf fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src7.arf
[Thu Jan 19 13:17:54 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:54 2012] Updating source flux to 1.4e-14