[Thu Jan 19 08:23:30 2012] Detection parameters:
  Position = (307.5, 948.4) = 3 32 38.07 -27 39 46.2
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 172.7 +/- 15.0
  Background counts = 52.3
  Rate = 0.002 +/- 0.0001

[Thu Jan 19 08:23:32 2012] Off-axis axis estimate = 8.83'
[Thu Jan 19 08:27:10 2012] Using EEF radius (= 3.45 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 08:27:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 08:27:10 2012] Initial guess for spatial extent in simple fitting = 3.45"
[Thu Jan 19 08:27:10 2012] source mask rpix=7.0, npix_max = 225, mask sum = 207, frac = 0.918
[Thu Jan 19 08:27:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.45"
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src1.ximg exists
[Thu Jan 19 08:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jan 19 08:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 08:56:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12052_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 19 08:56:44 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 19 08:56:44 2012] Fit fullrun_ccd0_acisf12052_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 19 10:20:48 2012] Spatial fit model total counts = 377.000000, observed total counts = 377.000000
[Thu Jan 19 10:20:48 2012] Offset between fit and detection position for source 1 = 2.241352 pixels
[Thu Jan 19 10:20:48 2012] 377.470000 total counts/ 135.756000 bgd. counts: snr = 20.745423
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.241352 pixels
  Position = (306.3, 950.3) = 3 32 38.14 -27 39 45.6
  Extent = 2.9 (2.6-3.3)", rotation angle = 0
  Source counts = 241.7 +/- 19.4
  Background counts = 135.8
  Rate = 0.002 +/- 0.0002
[Thu Jan 19 10:20:48 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:20:48 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:20:48 2012] Source does appear to be extended
[Thu Jan 19 10:20:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 10:21:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 10:21:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 10:21:20 2012] Initial guess for spatial extent in simple fitting = 2.91"
[Thu Jan 19 10:21:20 2012] source mask rpix=5.9, npix_max = 164, mask sum = 158, frac = 0.959
[Thu Jan 19 10:21:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.91"
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src1.ximg exists
[Thu Jan 19 10:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jan 19 10:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 10:54:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12052_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 19 10:54:29 2012] fullrun_ccd0_acisf12052_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 19 10:54:29 2012] Fit fullrun_ccd0_acisf12052_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 19 12:11:45 2012] Spatial fit model total counts = 341.000000, observed total counts = 341.000000
[Thu Jan 19 12:11:45 2012] Offset between fit and detection position for source 1 = 0.120452 pixels
[Thu Jan 19 12:11:45 2012] 341.212000 total counts/ 111.490000 bgd. counts: snr = 21.756280
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.120452 pixels
  Position = (306.3, 950.2) = 3 32 38.13 -27 39 45.6
  Extent = 2.8 (2.5-3.2)", rotation angle = 0
  Source counts = 229.7 +/- 18.5
  Background counts = 111.5
  Rate = 0.002 +/- 0.0002
[Thu Jan 19 12:11:45 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 12:11:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 12:11:45 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 12:11:45 2012] Source does appear to be extended
[Thu Jan 19 12:11:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 12:12:15 2012] Writing source region out to fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1_src.reg
[Thu Jan 19 12:12:15 2012] Extracting stamp from image fullrun_ccd0_acisf12052_pi14-548_cl_sm2.00.img.gz, (180, 824) - (433, 1076)
[Thu Jan 19 12:12:15 2012] Writing fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1.gif
[Thu Jan 19 12:12:17 2012] Size of ../../acisf12052/products/events/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1_src.evt.gz[events] = 313 counts
[Thu Jan 19 12:12:17 2012] Mean chipx,y = (93.94, 718.96)
[Thu Jan 19 12:12:17 2012] Mean tdetx,y = (3779.96, 5038.06)
[Thu Jan 19 12:12:17 2012] chipx,y range = (55.00-123.00, 685.00-754.00)
[Thu Jan 19 12:12:17 2012] Size of ../../acisf12052/products/events/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 672 counts
[Thu Jan 19 12:12:18 2012] rmf not found, will run specextract
[Thu Jan 19 12:12:18 2012] arf not found, will run specextract
[Thu Jan 19 12:12:44 2012] ../../acisf12052/products/spectra/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1.warf not found
[Thu Jan 19 12:12:44 2012] ../../acisf12052/products/spectra/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jan 19 12:12:44 2012] Removal of ../../acisf12052/products/spectra/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1.soff failed
[Thu Jan 19 12:28:43 2012] Keeping rmf generated by specextract
[Thu Jan 19 12:28:43 2012] 142.794
[Thu Jan 19 13:17:54 2012] Updating aperture counts using extracted products
[Thu Jan 19 13:17:54 2012] Error reading totcts from fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jan 19 13:17:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:17:54 2012] Using photon index=1.80, rate=0.00208, arf fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 13:17:54 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:17:54 2012] Updating source flux to 3.5e-14
[Thu Jan 19 13:18:19 2012] Reading fit data from acisf12052/analysis//spectral/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1_pl.csv
[Thu Jan 19 13:18:19 2012] Spectral fit parameter nH value = 1.80433e+21
[Thu Jan 19 13:18:19 2012] Spectral fit parameter PhoIndex value = 2.41312
[Thu Jan 19 13:18:19 2012] Failed to get F(0.3-8.0) from acisf12052/analysis//spectral/fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jan 19 13:18:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 13:18:19 2012] Using Nh = 1.8e+21, photon index=2.41, rate=0.00208, arf fullrun_ccd0_acisf12052_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 13:18:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 13:18:19 2012] Updating source flux to 2.8e-14