[Tue Feb 21 01:04:37 2012] Detection parameters:
  Position = (488.4, 990.6) = 3 32 8.67 -27 47 34.9
  Extent = 0.8" x 0.6", rotation angle = 47 degrees
  Source counts = 165.1 +/- 13.0
  Background counts = 2.9
  Rate = 0.006 +/- 0.0004

[Tue Feb 21 01:04:38 2012] Off-axis axis estimate = 4.04'
[Tue Feb 21 01:53:13 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:53:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 01:53:13 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Tue Feb 21 01:53:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.279
[Tue Feb 21 01:53:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.84"
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_src1.ximg exists
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Feb 21 02:01:08 2012] Fit fullrun_ccd2_acisf12050_pi14-548_cl_pass0_src1 appears to have run properly
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 21 02:01:08 2012] Fit fullrun_ccd2_acisf12050_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 21 02:10:30 2012] Source 3 is offset by 1.554868 and -4.603534 pixels which is larger than
2 X fitted extent = 0.855480 x 0.855480, not incorporating fit results
[Tue Feb 21 02:10:30 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 02:10:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 02:10:30 2012] Assessing source extent using major
[Tue Feb 21 02:10:30 2012] Source does appear to be extended
[Tue Feb 21 02:10:30 2012] Computing asymmetry using major and minor axis, asym = 1.49
[Tue Feb 21 02:56:27 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 02:56:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 02:56:27 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Tue Feb 21 02:56:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.279
[Tue Feb 21 02:56:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.84"
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src1.ximg exists
[Tue Feb 21 03:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src1.csv
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Feb 21 03:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src1.csv
[Tue Feb 21 03:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 03:03:08 2012] Fit fullrun_ccd2_acisf12050_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 03:10:31 2012] Spatial fit model total counts = 171.638000, observed total counts = 171.000000
[Tue Feb 21 03:10:31 2012] Offset between fit and detection position for source 3 = 0.732670 pixels
[Tue Feb 21 03:10:31 2012] 171.026220 total counts/ 8.574220 bgd. counts: snr = 55.478888
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.732670 pixels
  Position = (488.9, 991.1) = 3 32 8.67 -27 47 34.9
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 162.5 +/- 13.1
  Background counts = 8.6
  Rate = 0.005 +/- 0.0004
[Tue Feb 21 03:10:31 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 03:10:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 03:10:31 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 03:10:31 2012] Source does appear to be extended
[Tue Feb 21 03:10:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:32:50 2012] Writing source region out to fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3_src.reg
[Tue Feb 21 03:32:50 2012] Extracting stamp from image fullrun_ccd2_acisf12050_pi14-548_cl_sm2.00.img.gz, (449, 951) - (529, 1031)
[Tue Feb 21 03:32:50 2012] Writing fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3.gif
[Tue Feb 21 03:32:52 2012] Size of ../../acisf12050/products/events/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3_src.evt.gz[events] = 166 counts
[Tue Feb 21 03:32:52 2012] Mean chipx,y = (153.13, 561.17)
[Tue Feb 21 03:32:52 2012] Mean tdetx,y = (3622.17, 3932.87)
[Tue Feb 21 03:32:52 2012] chipx,y range = (131.00-171.00, 537.00-578.00)
[Tue Feb 21 03:32:52 2012] Size of ../../acisf12050/products/events/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 20 counts
[Tue Feb 21 03:32:53 2012] rmf not found, will run specextract
[Tue Feb 21 03:32:53 2012] arf not found, will run specextract
[Tue Feb 21 03:33:18 2012] ../../acisf12050/products/spectra/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3.warf not found
[Tue Feb 21 03:33:18 2012] ../../acisf12050/products/spectra/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3.wrmf not found
[Tue Feb 21 03:33:18 2012] Removal of ../../acisf12050/products/spectra/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3.soff failed
[Tue Feb 21 03:45:54 2012] Keeping rmf generated by specextract
[Tue Feb 21 03:45:54 2012] 166.33
[Tue Feb 21 03:50:37 2012] Updating aperture counts using extracted products
[Tue Feb 21 03:50:37 2012] Error reading totcts from fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Feb 21 03:50:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 03:50:37 2012] Using photon index=1.80, rate=0.00548, arf fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3.arf
[Tue Feb 21 03:50:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 03:50:37 2012] Updating source flux to 7.8e-14
[Tue Feb 21 03:50:46 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue Feb 21 03:50:49 2012] Reading fit data from acisf12050/analysis//spectral/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3_pl.csv
[Tue Feb 21 03:50:49 2012] Spectral fit parameter nH value = 1.1934e+15
[Tue Feb 21 03:50:49 2012] Spectral fit parameter PhoIndex value = 1.66165
[Tue Feb 21 03:50:49 2012] Failed to get F(0.3-8.0) from acisf12050/analysis//spectral/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 03:50:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 03:50:49 2012] Using Nh = 1.2e+15, photon index=1.66, rate=0.00548, arf fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src3.arf
[Tue Feb 21 03:50:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 03:50:49 2012] Updating source flux to 8.1e-14