[Tue Feb 21 01:04:37 2012] Detection parameters:
  Position = (1066.3, 304.5) = 3 31 47.21 -27 53 12.1
  Extent = 2.8" x 2.3", rotation angle = 87 degrees
  Source counts = 21.6 +/- 5.7
  Background counts = 10.4
  Rate = 0.0007 +/- 0.0002

[Tue Feb 21 01:04:38 2012] Off-axis axis estimate = 9.96'
[Tue Feb 21 01:53:13 2012] Using EEF radius (= 4.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:53:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 01:53:13 2012] Initial guess for spatial extent in simple fitting = 4.40"
[Tue Feb 21 01:53:13 2012] source mask rpix=8.9, npix_max = 356, mask sum = 361, frac = 1.014
[Tue Feb 21 01:53:13 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 4.40"
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_src2.ximg exists
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Feb 21 02:01:08 2012] Fit fullrun_ccd2_acisf12050_pi14-548_cl_pass0_src2 appears to have run properly
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Feb 21 02:01:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Feb 21 02:01:08 2012] Fit fullrun_ccd2_acisf12050_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Feb 21 02:10:30 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 51.080589 pixels away
[Tue Feb 21 02:10:30 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 02:10:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 02:10:30 2012] Assessing source extent using major
[Tue Feb 21 02:10:30 2012] Source does appear to be extended
[Tue Feb 21 02:10:30 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Tue Feb 21 02:56:27 2012] Using EEF radius (= 4.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 02:56:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 02:56:27 2012] Initial guess for spatial extent in simple fitting = 4.40"
[Tue Feb 21 02:56:27 2012] source mask rpix=8.9, npix_max = 356, mask sum = 361, frac = 1.014
[Tue Feb 21 02:56:27 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.40"
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src2.ximg exists
[Tue Feb 21 03:03:08 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src2.csv
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Feb 21 03:03:08 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src2.csv
[Tue Feb 21 03:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12050_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Feb 21 03:03:08 2012] fullrun_ccd2_acisf12050_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Feb 21 03:03:08 2012] Fit fullrun_ccd2_acisf12050_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Feb 21 03:10:31 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 51.080589 pixels away
[Tue Feb 21 03:10:31 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 03:10:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 03:10:31 2012] Assessing source extent using major
[Tue Feb 21 03:10:31 2012] Source does appear to be extended
[Tue Feb 21 03:10:31 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Tue Feb 21 03:32:50 2012] Writing source region out to fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2_src.reg
[Tue Feb 21 03:32:50 2012] Extracting stamp from image fullrun_ccd2_acisf12050_pi14-548_cl_sm2.00.img.gz, (939, 177) - (1194, 432)
[Tue Feb 21 03:32:50 2012] Writing fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2.gif
[Tue Feb 21 03:33:27 2012] Size of ../../acisf12050/products/events/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2_src.evt.gz[events] = 35 counts
[Tue Feb 21 03:33:27 2012] Mean chipx,y = (996.34, 247.40)
[Tue Feb 21 03:33:27 2012] Mean tdetx,y = (3308.40, 3089.66)
[Tue Feb 21 03:33:27 2012] chipx,y range = (961.00-1022.00, 222.00-269.00)
[Tue Feb 21 03:33:27 2012] Size of ../../acisf12050/products/events/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 99 counts
[Tue Feb 21 03:33:28 2012] Not generating rmf since there are only 21 counts
[Tue Feb 21 03:33:28 2012] arf not found, will run specextract
[Tue Feb 21 03:33:49 2012] ../../acisf12050/products/spectra/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2.warf not found
[Tue Feb 21 03:33:49 2012] ../../acisf12050/products/spectra/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2.wrmf not found
[Tue Feb 21 03:33:49 2012] Removal of ../../acisf12050/products/spectra/fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2.soff failed
[Tue Feb 21 03:45:54 2012] Spectrum 2 has only 22 counts, deleting rmf
[Tue Feb 21 03:45:54 2012] 151.682
[Tue Feb 21 03:50:37 2012] Updating aperture counts using extracted products
[Tue Feb 21 03:50:37 2012] Error reading totcts from fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Feb 21 03:50:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 03:50:37 2012] Using photon index=1.80, rate=0.000727, arf fullrun_ccd2_acisf12050_pi14-548_pass1_cl_src2.arf
[Tue Feb 21 03:50:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 03:50:37 2012] Updating source flux to 1.2e-14
[Tue Feb 21 03:50:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting