[Thu Jan 19 04:46:08 2012] Detection parameters:
  Position = (164.1, 1019.1) = 3 32 20.51 -27 47 32.4
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 16.0 +/- 4.2
  Background counts = 2.0
  Rate = 0.0002 +/- 5e-05

[Thu Jan 19 04:46:09 2012] Off-axis axis estimate = 1.60'
[Thu Jan 19 05:55:00 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 05:55:00 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Jan 19 05:55:00 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.584
[Thu Jan 19 05:55:00 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.40"
[Thu Jan 19 06:20:21 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass0_src15.ximg exists
[Thu Jan 19 06:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12049_pi14-548_cl_pass0_src15.csv
[Thu Jan 19 06:20:21 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Jan 19 06:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12049_pi14-548_cl_pass0_src15.csv
[Thu Jan 19 06:20:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12049_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12049_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 06:20:21 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Jan 19 06:20:21 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jan 19 06:20:21 2012] Fit fullrun_ccd2_acisf12049_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Jan 19 06:40:51 2012] Spatial fit model total counts = 23.185900, observed total counts = 23.000000
[Thu Jan 19 06:40:51 2012] Offset between fit and detection position for source 20 = 0.675518 pixels
[Thu Jan 19 06:40:51 2012] 22.595970 total counts/ 5.899770 bgd. counts: snr = 6.873851
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.675518 pixels
  Position = (164.7, 1019.5) = 3 32 20.51 -27 47 32.5
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 16.7 +/- 4.8
  Background counts = 5.9
  Rate = 0.0002 +/- 5e-05
[Thu Jan 19 06:40:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 06:40:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 06:40:51 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 06:40:51 2012] Source does appear to be extended
[Thu Jan 19 06:40:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 07:38:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 07:38:03 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Jan 19 07:38:03 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.918
[Thu Jan 19 07:38:03 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.52"
[Thu Jan 19 08:02:28 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass1_src13.ximg exists
[Thu Jan 19 08:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12049_pi14-548_cl_pass1_src13.csv
[Thu Jan 19 08:02:28 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Jan 19 08:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12049_pi14-548_cl_pass1_src13.csv
[Thu Jan 19 08:02:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12049_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12049_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 08:02:29 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Jan 19 08:02:29 2012] fullrun_ccd2_acisf12049_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jan 19 08:02:29 2012] Fit fullrun_ccd2_acisf12049_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jan 19 08:22:16 2012] Spatial fit model total counts = 22.735400, observed total counts = 23.000000
[Thu Jan 19 08:22:16 2012] Offset between fit and detection position for source 20 = 0.034502 pixels
[Thu Jan 19 08:22:16 2012] 22.139030 total counts/ 5.363030 bgd. counts: snr = 7.244081
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.034502 pixels
  Position = (164.6, 1019.6) = 3 32 20.51 -27 47 32.4
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.8 +/- 4.7
  Background counts = 5.4
  Rate = 0.0002 +/- 5e-05
[Thu Jan 19 08:22:16 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 08:22:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 08:22:16 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 08:22:16 2012] Source does appear to be extended
[Thu Jan 19 08:22:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 08:51:10 2012] Writing source region out to fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20_src.reg
[Thu Jan 19 08:51:10 2012] Extracting stamp from image fullrun_ccd2_acisf12049_pi14-548_cl_sm2.00.img.gz, (139, 994) - (190, 1045)
[Thu Jan 19 08:51:10 2012] Writing fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20.gif
[Thu Jan 19 08:59:22 2012] Size of ../../acisf12049/products/events/fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20_src.evt.gz[events] = 18 counts
[Thu Jan 19 08:59:22 2012] Mean chipx,y = (17.72, 858.11)
[Thu Jan 19 08:59:22 2012] Mean tdetx,y = (3919.11, 4068.28)
[Thu Jan 19 08:59:22 2012] chipx,y range = (2.00-35.00, 841.00-878.00)
[Thu Jan 19 08:59:22 2012] Size of ../../acisf12049/products/events/fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 13 counts
[Thu Jan 19 08:59:23 2012] Not generating rmf since there are only 16 counts
[Thu Jan 19 08:59:23 2012] arf not found, will run specextract
[Thu Jan 19 08:59:51 2012] ../../acisf12049/products/spectra/fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20.warf not found
[Thu Jan 19 08:59:51 2012] ../../acisf12049/products/spectra/fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20.wrmf not found
[Thu Jan 19 08:59:51 2012] Removal of ../../acisf12049/products/spectra/fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20.soff failed
[Thu Jan 19 09:08:20 2012] Spectrum 20 has only 17 counts, deleting rmf
[Thu Jan 19 09:08:20 2012] 168.984
[Thu Jan 19 09:28:40 2012] Updating aperture counts using extracted products
[Thu Jan 19 09:28:40 2012] Error reading totcts from fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20_src.pi.gz
[Thu Jan 19 09:28:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 09:28:41 2012] Using photon index=1.80, rate=0.000193, arf fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20.arf
[Thu Jan 19 09:28:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 09:28:41 2012] Updating source flux to 2.7e-15
[Thu Jan 19 09:29:03 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jan 19 09:29:04 2012] acisf12049/analysis//spectral/fullrun_ccd2_acisf12049_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete