[Wed Jan 18 07:47:55 2012] Detection parameters:
  Position = (545.1, 306.7) = 3 32 44.76 -27 54 54.7
  Extent = 0.9" x 0.7", rotation angle = 68 degrees
  Source counts = 11.2 +/- 4.1
  Background counts = 5.8
  Rate = 8e-05 +/- 3e-05

[Wed Jan 18 07:47:55 2012] Off-axis axis estimate = 7.60'
[Wed Jan 18 09:49:48 2012] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 09:49:48 2012] Initial guess for spatial extent in simple fitting = 2.56"
[Wed Jan 18 09:49:48 2012] source mask rpix=5.2, npix_max = 129, mask sum = 132, frac = 1.017
[Wed Jan 18 09:49:48 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 2.56"
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src25.ximg exists
[Wed Jan 18 10:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src25.csv
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src25_1.ximg exists
[Wed Jan 18 10:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src25.csv
[Wed Jan 18 10:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 10:23:48 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Wed Jan 18 10:23:48 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jan 18 10:23:48 2012] Fit fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Jan 18 10:24:09 2012] Spatial fit model total counts = 54.535600, observed total counts = 55.000000
[Wed Jan 18 10:24:09 2012] Offset between fit and detection position for source 48 = 0.490662 pixels
[Wed Jan 18 10:24:09 2012] 55.221900 total counts/ 44.554400 bgd. counts: snr = 1.598149
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.490662 pixels
  Position = (545.6, 306.6) = 3 32 44.77 -27 54 55.0
  Extent = 0.6" x 0.6", rotation angle = 0
  Source counts = 10.7 +/- 7.4
  Background counts = 44.6
  Rate = 8e-05 +/- 5e-05
  Deleting source due to low Poisson probability