[Wed Jan 18 07:47:54 2012] Detection parameters:
  Position = (454.6, 545.6) = 3 32 48.12 -27 52 57.1
  Extent = 1.5" x 1.1", rotation angle = 135 degrees
  Source counts = 21.8 +/- 5.8
  Background counts = 12.2
  Rate = 0.0002 +/- 4e-05

[Wed Jan 18 07:47:55 2012] Off-axis axis estimate = 6.54'
[Wed Jan 18 09:49:48 2012] Using EEF radius (= 1.92 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 09:49:48 2012] Initial guess for spatial extent in simple fitting = 1.92"
[Wed Jan 18 09:49:48 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.049
[Wed Jan 18 09:49:48 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 1.92"
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src13.ximg exists
[Wed Jan 18 10:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src13.csv
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Jan 18 10:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src13.csv
[Wed Jan 18 10:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jan 18 10:23:47 2012] Fit fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Jan 18 10:24:09 2012] Warning, spatial fit 13 centroid is now closest to src. 26
[Wed Jan 18 10:24:09 2012] Source 18 is offset by 0.356497 and -3.702341 pixels which is larger than
2 X fitted extent = 2.992988 x 2.992988, not incorporating fit results
[Wed Jan 18 10:24:09 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 10:24:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 10:24:09 2012] Assessing source extent using major
[Wed Jan 18 10:24:09 2012] Source does appear to be extended
[Wed Jan 18 10:24:09 2012] Computing asymmetry using major and minor axis, asym = 1.30
[Wed Jan 18 12:15:22 2012] Using EEF radius (= 1.92 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 12:15:22 2012] Initial guess for spatial extent in simple fitting = 1.92"
[Wed Jan 18 12:15:22 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.049
[Wed Jan 18 12:15:22 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 1.92"
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src13.ximg exists
[Wed Jan 18 12:40:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src13.csv
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Jan 18 12:40:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src13.csv
[Wed Jan 18 12:40:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jan 18 12:40:31 2012] Fit fullrun_ccd3_acisf12048_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jan 18 12:40:50 2012] Spatial fit model total counts = 50.094100, observed total counts = 50.000000
[Wed Jan 18 12:40:50 2012] Offset between fit and detection position for source 18 = 1.597256 pixels
[Wed Jan 18 12:40:50 2012] 50.048200 total counts/ 29.504900 bgd. counts: snr = 3.782014
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.597256 pixels
  Position = (454.4, 547.1) = 3 32 48.14 -27 52 56.6
  Extent = 1.4 (0.9-2.4)", rotation angle = 0
  Source counts = 20.5 +/- 7.1
  Background counts = 29.5
  Rate = 0.0001 +/- 5e-05
[Wed Jan 18 12:40:50 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 12:40:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 12:40:50 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 12:40:50 2012] Source does appear to be extended
[Wed Jan 18 12:40:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 13:30:38 2012] Writing source region out to fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18_src.reg
[Wed Jan 18 13:30:38 2012] Extracting stamp from image fullrun_ccd3_acisf12048_pi14-548_cl_sm2.00.img.gz, (389, 482) - (520, 613)
[Wed Jan 18 13:30:38 2012] Writing fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18.gif
[Wed Jan 18 13:38:15 2012] Size of ../../acisf12048/products/events/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18_src.evt.gz[events] = 41 counts
[Wed Jan 18 13:38:15 2012] Mean chipx,y = (487.07, 370.15)
[Wed Jan 18 13:38:15 2012] Mean tdetx,y = (4761.85, 3548.07)
[Wed Jan 18 13:38:15 2012] chipx,y range = (461.00-510.00, 352.00-392.00)
[Wed Jan 18 13:38:15 2012] Size of ../../acisf12048/products/events/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 205 counts
[Wed Jan 18 13:38:16 2012] Not generating rmf since there are only 20 counts
[Wed Jan 18 13:38:16 2012] arf not found, will run specextract
[Wed Jan 18 13:38:44 2012] ../../acisf12048/products/spectra/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18.warf not found
[Wed Jan 18 13:38:44 2012] ../../acisf12048/products/spectra/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18.wrmf not found
[Wed Jan 18 13:38:44 2012] Removal of ../../acisf12048/products/spectra/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18.soff failed
[Wed Jan 18 13:52:18 2012] Spectrum 18 has only 21 counts, deleting rmf
[Wed Jan 18 13:52:18 2012] 169.019
[Wed Jan 18 13:53:05 2012] Updating aperture counts using extracted products
[Wed Jan 18 13:53:05 2012] Error reading totcts from fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18_src.pi.gz
[Wed Jan 18 13:53:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 13:53:06 2012] Using photon index=1.80, rate=0.000149, arf fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src18.arf
[Wed Jan 18 13:53:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 13:53:06 2012] Updating source flux to 2.1e-15
[Wed Jan 18 13:53:58 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Wed Jan 18 13:53:58 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting