[Wed Jan 18 07:47:54 2012] Detection parameters:
  Position = (326.9, 741.8) = 3 32 52.85 -27 51 20.5
  Extent = 1.8" x 1.1", rotation angle = 146 degrees
  Source counts = 32.1 +/- 6.7
  Background counts = 12.9
  Rate = 0.0002 +/- 5e-05

[Wed Jan 18 07:47:55 2012] Off-axis axis estimate = 6.48'
[Wed Jan 18 09:49:48 2012] Using EEF radius (= 1.88 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 09:49:48 2012] Initial guess for spatial extent in simple fitting = 1.88"
[Wed Jan 18 09:49:48 2012] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.964
[Wed Jan 18 09:49:48 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 1.88"
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src9.ximg exists
[Wed Jan 18 10:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src9.csv
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Jan 18 10:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src9.csv
[Wed Jan 18 10:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12048_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Jan 18 10:23:47 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jan 18 10:23:47 2012] Fit fullrun_ccd3_acisf12048_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jan 18 10:24:09 2012] Spatial fit model total counts = 43.119200, observed total counts = 46.000000
[Wed Jan 18 10:24:09 2012] Offset between fit and detection position for source 17 = 0.802697 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.802697 pixels
  Position = (326.3, 742.4) = 3 32 52.89 -27 51 20.5
  Extent = 2.0 (1.4-2.3)", rotation angle = 0
  Source counts = 44.4 +/- 6.7
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Wed Jan 18 10:24:09 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 10:24:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 10:24:09 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 10:24:09 2012] Source does appear to be extended
[Wed Jan 18 10:24:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 12:15:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 12:15:22 2012] Initial guess for spatial extent in simple fitting = 2.02"
[Wed Jan 18 12:15:22 2012] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.956
[Wed Jan 18 12:15:22 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 2.02"
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src9.ximg exists
[Wed Jan 18 12:40:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src9.csv
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src9_1.ximg exists
[Wed Jan 18 12:40:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src9.csv
[Wed Jan 18 12:40:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12048_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed Jan 18 12:40:31 2012] fullrun_ccd3_acisf12048_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jan 18 12:40:31 2012] Fit fullrun_ccd3_acisf12048_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jan 18 12:40:50 2012] Spatial fit model total counts = 46.641800, observed total counts = 47.000000
[Wed Jan 18 12:40:50 2012] Offset between fit and detection position for source 17 = 0.849179 pixels
[Wed Jan 18 12:40:50 2012] 47.098400 total counts/ 5.687000 bgd. counts: snr = 17.365140
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.849179 pixels
  Position = (327.2, 742.2) = 3 32 52.86 -27 51 20.6
  Extent = 1.9 (1.4-2.2)", rotation angle = 0
  Source counts = 41.4 +/- 6.9
  Background counts = 5.7
  Rate = 0.0003 +/- 5e-05
[Wed Jan 18 12:40:50 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 12:40:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 12:40:50 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 12:40:50 2012] Source does appear to be extended
[Wed Jan 18 12:40:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 13:30:38 2012] Writing source region out to fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17_src.reg
[Wed Jan 18 13:30:38 2012] Extracting stamp from image fullrun_ccd3_acisf12048_pi14-548_cl_sm2.00.img.gz, (239, 654) - (416, 831)
[Wed Jan 18 13:30:38 2012] Writing fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17.gif
[Wed Jan 18 13:35:40 2012] Size of ../../acisf12048/products/events/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17_src.evt.gz[events] = 53 counts
[Wed Jan 18 13:35:40 2012] Mean chipx,y = (697.25, 268.81)
[Wed Jan 18 13:35:40 2012] Mean tdetx,y = (4863.19, 3758.25)
[Wed Jan 18 13:35:40 2012] chipx,y range = (674.00-718.00, 248.00-302.00)
[Wed Jan 18 13:35:40 2012] Size of ../../acisf12048/products/events/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 348 counts
[Wed Jan 18 13:35:41 2012] Not generating rmf since there are only 41 counts
[Wed Jan 18 13:35:41 2012] arf not found, will run specextract
[Wed Jan 18 13:36:04 2012] ../../acisf12048/products/spectra/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17.warf not found
[Wed Jan 18 13:36:04 2012] ../../acisf12048/products/spectra/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17.wrmf not found
[Wed Jan 18 13:36:04 2012] Removal of ../../acisf12048/products/spectra/fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17.soff failed
[Wed Jan 18 13:52:18 2012] Spectrum 17 has only 41 counts, deleting rmf
[Wed Jan 18 13:52:18 2012] 180.158
[Wed Jan 18 13:53:05 2012] Updating aperture counts using extracted products
[Wed Jan 18 13:53:05 2012] Error reading totcts from fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17_src.pi.gz
[Wed Jan 18 13:53:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 13:53:06 2012] Using photon index=1.80, rate=0.0003, arf fullrun_ccd3_acisf12048_pi14-548_pass1_cl_src17.arf
[Wed Jan 18 13:53:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 13:53:06 2012] Updating source flux to 4e-15
[Wed Jan 18 13:53:58 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting