[Wed Jan 18 07:47:49 2012] Detection parameters:
  Position = (991.9, 763.5) = 3 32 33.33 -27 42 38.3
  Extent = 0.7" x 0.5", rotation angle = 130 degrees
  Source counts = 12.9 +/- 4.7
  Background counts = 9.1
  Rate = 9e-05 +/- 3e-05

[Wed Jan 18 07:47:49 2012] Off-axis axis estimate = 6.00'
[Wed Jan 18 08:29:06 2012] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 08:29:06 2012] Initial guess for spatial extent in simple fitting = 1.63"
[Wed Jan 18 08:29:06 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.961
[Wed Jan 18 08:29:06 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 1.63"
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src26.ximg exists
[Wed Jan 18 09:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src26.csv
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src26_1.ximg exists
[Wed Jan 18 09:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src26.csv
[Wed Jan 18 09:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jan 18 09:12:23 2012] Fit fullrun_ccd1_acisf12048_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Jan 18 10:24:01 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 19.778783 pixels away
[Wed Jan 18 10:24:01 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 10:24:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 10:24:01 2012] Assessing source extent using major
[Wed Jan 18 10:24:01 2012] Source does appear to be extended
[Wed Jan 18 10:24:01 2012] Computing asymmetry using major and minor axis, asym = 1.36
[Wed Jan 18 11:02:07 2012] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 11:02:07 2012] Initial guess for spatial extent in simple fitting = 1.63"
[Wed Jan 18 11:02:07 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.961
[Wed Jan 18 11:02:07 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 1.63"
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src26.ximg exists
[Wed Jan 18 11:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src26.csv
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src26_1.ximg exists
[Wed Jan 18 11:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src26.csv
[Wed Jan 18 11:41:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jan 18 11:41:20 2012] Fit fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Jan 18 12:40:43 2012] Spatial fit model total counts = 39.025700, observed total counts = 39.000000
[Wed Jan 18 12:40:43 2012] Offset between fit and detection position for source 38 = 3.797202 pixels
[Wed Jan 18 12:40:43 2012] 39.181700 total counts/ 10.076000 bgd. counts: snr = 9.169253
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 3.797202 pixels
  Position = (990.1, 766.8) = 3 32 33.41 -27 42 36.9
  Extent = 1.9 (1.4-3.1)", rotation angle = 0
  Source counts = 29.1 +/- 6.3
  Background counts = 10.1
  Rate = 0.0002 +/- 5e-05
[Wed Jan 18 12:40:43 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 12:40:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 12:40:43 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 12:40:43 2012] Source does appear to be extended
[Wed Jan 18 12:40:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 12:55:06 2012] Writing source region out to fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38_src.reg
[Wed Jan 18 12:55:06 2012] Extracting stamp from image fullrun_ccd1_acisf12048_pi14-548_cl_sm2.00.img.gz, (901, 678) - (1079, 856)
[Wed Jan 18 12:55:06 2012] Writing fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38.gif
[Wed Jan 18 13:08:47 2012] Size of ../../acisf12048/products/events/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38_src.evt.gz[events] = 66 counts
[Wed Jan 18 13:08:47 2012] Mean chipx,y = (635.33, 942.89)
[Wed Jan 18 13:08:47 2012] Mean tdetx,y = (4189.11, 4742.33)
[Wed Jan 18 13:08:47 2012] chipx,y range = (605.00-661.00, 915.00-967.00)
[Wed Jan 18 13:08:47 2012] Size of ../../acisf12048/products/events/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 438 counts
[Wed Jan 18 13:08:48 2012] Not generating rmf since there are only 29 counts
[Wed Jan 18 13:08:48 2012] arf not found, will run specextract
[Wed Jan 18 13:09:20 2012] ../../acisf12048/products/spectra/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38.warf not found
[Wed Jan 18 13:09:20 2012] ../../acisf12048/products/spectra/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38.wrmf not found
[Wed Jan 18 13:09:20 2012] Removal of ../../acisf12048/products/spectra/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38.soff failed
[Wed Jan 18 13:10:48 2012] Spectrum 38 has only 29 counts, deleting rmf
[Wed Jan 18 13:10:48 2012] 184.834
[Wed Jan 18 13:53:04 2012] Updating aperture counts using extracted products
[Wed Jan 18 13:53:04 2012] Error reading totcts from fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38_src.pi.gz
[Wed Jan 18 13:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 13:53:04 2012] Using photon index=1.80, rate=0.000211, arf fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src38.arf
[Wed Jan 18 13:53:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 13:53:04 2012] Updating source flux to 2.7e-15
[Wed Jan 18 13:53:23 2012] Source 38 has fewer than 100.000000 counts, skipping spectral fitting