[Wed Jan 18 07:47:47 2012] Detection parameters:
  Position = (702.5, 279.5) = 3 32 44.06 -27 46 36.4
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 17.8 +/- 4.6
  Background counts = 3.2
  Rate = 0.0001 +/- 3e-05

[Wed Jan 18 07:47:49 2012] Off-axis axis estimate = 4.28'
[Wed Jan 18 08:29:06 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 08:29:06 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Wed Jan 18 08:29:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.984
[Wed Jan 18 08:29:06 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.92"
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src23.ximg exists
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src23_1.ximg exists
[Wed Jan 18 09:12:23 2012] Fit fullrun_ccd1_acisf12048_pi14-548_cl_pass0_src23 appears to have run properly
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Wed Jan 18 09:12:23 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Jan 18 09:12:23 2012] Fit fullrun_ccd1_acisf12048_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Jan 18 10:24:01 2012] Spatial fit model total counts = 29.102000, observed total counts = 31.000000
[Wed Jan 18 10:24:01 2012] Offset between fit and detection position for source 11 = 1.683168 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.683168 pixels
  Position = (703.7, 280.7) = 3 32 44.04 -27 46 36.0
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 28.4 +/- 5.3
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Wed Jan 18 10:24:01 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 10:24:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 10:24:01 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 10:24:01 2012] Source does appear to be extended
[Wed Jan 18 10:24:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 11:02:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 11:02:07 2012] Initial guess for spatial extent in simple fitting = 1.03"
[Wed Jan 18 11:02:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.745
[Wed Jan 18 11:02:07 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 1.03"
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src23.ximg exists
[Wed Jan 18 11:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src23.csv
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src23_1.ximg exists
[Wed Jan 18 11:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src23.csv
[Wed Jan 18 11:41:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12048_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Wed Jan 18 11:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src23.csv
[Wed Jan 18 11:41:20 2012] fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Jan 18 11:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src23.csv
[Wed Jan 18 11:41:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12048_pi14-548_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 12:40:43 2012] Spatial fit model total counts = 26.932700, observed total counts = 30.000000
[Wed Jan 18 12:40:43 2012] Offset between fit and detection position for source 11 = 0.194190 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.194190 pixels
  Position = (703.5, 280.7) = 3 32 44.04 -27 46 36.1
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 26.9 +/- 5.2
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Wed Jan 18 12:40:43 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 12:40:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 12:40:43 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 12:40:43 2012] Source does appear to be extended
[Wed Jan 18 12:40:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 12:55:06 2012] Writing source region out to fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11_src.reg
[Wed Jan 18 12:55:06 2012] Extracting stamp from image fullrun_ccd1_acisf12048_pi14-548_cl_sm2.00.img.gz, (656, 233) - (751, 328)
[Wed Jan 18 12:55:06 2012] Writing fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11.gif
[Wed Jan 18 13:07:20 2012] Size of ../../acisf12048/products/events/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11_src.evt.gz[events] = 30 counts
[Wed Jan 18 13:07:20 2012] Mean chipx,y = (190.90, 589.23)
[Wed Jan 18 13:07:20 2012] Mean tdetx,y = (4542.77, 4297.90)
[Wed Jan 18 13:07:20 2012] chipx,y range = (174.00-212.00, 571.00-610.00)
[Wed Jan 18 13:07:20 2012] Size of ../../acisf12048/products/events/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 130 counts
[Wed Jan 18 13:07:22 2012] Not generating rmf since there are only 26 counts
[Wed Jan 18 13:07:22 2012] arf not found, will run specextract
[Wed Jan 18 13:07:45 2012] ../../acisf12048/products/spectra/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11.warf not found
[Wed Jan 18 13:07:45 2012] ../../acisf12048/products/spectra/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11.wrmf not found
[Wed Jan 18 13:07:45 2012] Removal of ../../acisf12048/products/spectra/fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11.soff failed
[Wed Jan 18 13:10:48 2012] Spectrum 11 has only 27 counts, deleting rmf
[Wed Jan 18 13:10:48 2012] 191.585
[Wed Jan 18 13:53:04 2012] Updating aperture counts using extracted products
[Wed Jan 18 13:53:04 2012] Error reading totcts from fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Jan 18 13:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 13:53:04 2012] Using photon index=1.80, rate=0.000195, arf fullrun_ccd1_acisf12048_pi14-548_pass1_cl_src11.arf
[Wed Jan 18 13:53:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 13:53:04 2012] Updating source flux to 2.4e-15
[Wed Jan 18 13:53:23 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting