[Tue Jan 17 01:36:33 2012] Detection parameters:
  Position = (426.5, 897.1) = 3 32 8.70 -27 47 34.5
  Extent = 0.9" x 0.5", rotation angle = 21 degrees
  Source counts = 581.2 +/- 24.3
  Background counts = 10.8
  Rate = 0.007 +/- 0.0003

[Tue Jan 17 01:36:34 2012] Off-axis axis estimate = 4.45'
[Tue Jan 17 01:39:39 2012] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:39:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 01:39:39 2012] Initial guess for spatial extent in simple fitting = 0.97"
[Tue Jan 17 01:39:39 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.015
[Tue Jan 17 01:39:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.97"
[Tue Jan 17 01:58:37 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 01:58:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12046_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 01:58:37 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 01:58:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12046_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 01:58:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12046_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12046_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 01:58:37 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 01:58:37 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 01:58:37 2012] Fit fullrun_ccd0_acisf12046_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 03:42:58 2012] Spatial fit model total counts = 587.579000, observed total counts = 586.000000
[Tue Jan 17 03:42:58 2012] Offset between fit and detection position for source 1 = 0.639298 pixels
[Tue Jan 17 03:42:58 2012] 588.973400 total counts/ 20.983400 bgd. counts: snr = 123.994597
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.639298 pixels
  Position = (426.9, 897.6) = 3 32 8.70 -27 47 34.5
  Extent = 1.0 (0.9-1.0)", rotation angle = 0
  Source counts = 568.0 +/- 24.3
  Background counts = 21.0
  Rate = 0.007 +/- 0.0003
[Tue Jan 17 03:42:58 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 03:42:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 03:42:58 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 03:42:58 2012] Source does appear to be extended
[Tue Jan 17 03:42:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 03:43:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 03:43:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 03:43:26 2012] Initial guess for spatial extent in simple fitting = 0.99"
[Tue Jan 17 03:43:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Tue Jan 17 03:43:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.99"
[Tue Jan 17 04:00:09 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 04:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12046_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 04:00:09 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 04:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12046_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 04:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12046_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12046_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 04:00:09 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 04:00:09 2012] fullrun_ccd0_acisf12046_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 04:00:09 2012] Fit fullrun_ccd0_acisf12046_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 05:34:46 2012] Spatial fit model total counts = 585.995000, observed total counts = 586.000000
[Tue Jan 17 05:34:46 2012] Offset between fit and detection position for source 1 = 0.004941 pixels
[Tue Jan 17 05:34:46 2012] 587.310700 total counts/ 20.371700 bgd. counts: snr = 125.609561
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004941 pixels
  Position = (426.9, 897.6) = 3 32 8.70 -27 47 34.5
  Extent = 1.0 (0.9-1.0)", rotation angle = 0
  Source counts = 566.9 +/- 24.2
  Background counts = 20.4
  Rate = 0.007 +/- 0.0003
[Tue Jan 17 05:34:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:34:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:34:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 05:34:46 2012] Source does appear to be extended
[Tue Jan 17 05:34:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 05:35:12 2012] Writing source region out to fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1_src.reg
[Tue Jan 17 05:35:12 2012] Extracting stamp from image fullrun_ccd0_acisf12046_pi14-548_cl_sm2.00.img.gz, (382, 852) - (472, 943)
[Tue Jan 17 05:35:12 2012] Writing fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1.gif
[Tue Jan 17 05:35:15 2012] Size of ../../acisf12046/products/events/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1_src.evt.gz[events] = 589 counts
[Tue Jan 17 05:35:15 2012] Mean chipx,y = (622.47, 836.83)
[Tue Jan 17 05:35:15 2012] Mean tdetx,y = (3897.83, 4509.53)
[Tue Jan 17 05:35:15 2012] chipx,y range = (599.00-644.00, 816.00-860.00)
[Tue Jan 17 05:35:15 2012] Size of ../../acisf12046/products/events/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 70 counts
[Tue Jan 17 05:35:16 2012] rmf not found, will run specextract
[Tue Jan 17 05:35:16 2012] arf not found, will run specextract
[Tue Jan 17 05:35:43 2012] ../../acisf12046/products/spectra/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1.warf not found
[Tue Jan 17 05:35:43 2012] ../../acisf12046/products/spectra/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jan 17 05:35:43 2012] Removal of ../../acisf12046/products/spectra/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1.soff failed
[Tue Jan 17 05:50:46 2012] Keeping rmf generated by specextract
[Tue Jan 17 05:50:46 2012] 190.196
[Tue Jan 17 06:35:33 2012] Updating aperture counts using extracted products
[Tue Jan 17 06:35:33 2012] Error reading totcts from fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jan 17 06:35:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 06:35:33 2012] Using photon index=1.80, rate=0.00727, arf fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 06:35:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 06:35:33 2012] Updating source flux to 9.1e-14
[Tue Jan 17 06:35:42 2012] Reading fit data from acisf12046/analysis//spectral/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1_pl.csv
[Tue Jan 17 06:35:42 2012] Spectral fit parameter nH value = 2.39629e+20
[Tue Jan 17 06:35:42 2012] Spectral fit parameter PhoIndex value = 1.89942
[Tue Jan 17 06:35:42 2012] Failed to get F(0.3-8.0) from acisf12046/analysis//spectral/fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 06:35:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 06:35:42 2012] Using Nh = 2.4e+20, photon index=1.90, rate=0.00727, arf fullrun_ccd0_acisf12046_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 06:35:42 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 06:35:42 2012] Updating source flux to 8.8e-14