[Wed Jan 18 22:12:35 2012] Detection parameters:
  Position = (801.6, 1239.9) = 3 32 47.88 -27 42 32.8
  Extent = 2.1" x 1.5", rotation angle = 55 degrees
  Source counts = 228.0 +/- 16.2
  Background counts = 33.0
  Rate = 0.002 +/- 0.0002

[Wed Jan 18 22:12:38 2012] Off-axis axis estimate = 7.65'
[Wed Jan 18 23:52:44 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 23:52:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 23:52:44 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Wed Jan 18 23:52:44 2012] source mask rpix=5.3, npix_max = 133, mask sum = 132, frac = 0.992
[Wed Jan 18 23:52:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.59"
[Thu Jan 19 00:23:14 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass0_src1.ximg exists
[Thu Jan 19 00:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12045_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 00:23:14 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jan 19 00:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12045_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 00:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12045_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12045_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 00:23:14 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 19 00:23:14 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 19 00:23:14 2012] Fit fullrun_ccd3_acisf12045_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 19 00:33:06 2012] Spatial fit model total counts = 276.998000, observed total counts = 277.000000
[Thu Jan 19 00:33:06 2012] Offset between fit and detection position for source 1 = 0.252084 pixels
[Thu Jan 19 00:33:06 2012] 277.885700 total counts/ 63.065700 bgd. counts: snr = 27.050675
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.252084 pixels
  Position = (801.7, 1240.1) = 3 32 47.90 -27 42 33.0
  Extent = 2.1 (1.8-2.4)", rotation angle = 0
  Source counts = 214.8 +/- 16.7
  Background counts = 63.1
  Rate = 0.002 +/- 0.0002
[Thu Jan 19 00:33:06 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 00:33:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 00:33:06 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 00:33:06 2012] Source does appear to be extended
[Thu Jan 19 00:33:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 02:02:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 02:02:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 02:02:58 2012] Initial guess for spatial extent in simple fitting = 2.07"
[Thu Jan 19 02:02:58 2012] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.012
[Thu Jan 19 02:02:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.07"
[Thu Jan 19 02:29:19 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass1_src1.ximg exists
[Thu Jan 19 02:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12045_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 02:29:19 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jan 19 02:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12045_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 02:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12045_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12045_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 02:29:19 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 19 02:29:19 2012] fullrun_ccd3_acisf12045_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 19 02:29:19 2012] Fit fullrun_ccd3_acisf12045_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 19 02:39:56 2012] Spatial fit model total counts = 263.811000, observed total counts = 264.000000
[Thu Jan 19 02:39:56 2012] Offset between fit and detection position for source 1 = 0.334309 pixels
[Thu Jan 19 02:39:56 2012] 265.048800 total counts/ 73.872800 bgd. counts: snr = 22.242884
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.334309 pixels
  Position = (801.4, 1240.1) = 3 32 47.91 -27 42 33.0
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 191.2 +/- 16.3
  Background counts = 73.9
  Rate = 0.002 +/- 0.0002
[Thu Jan 19 02:39:56 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 02:39:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 02:39:56 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 02:39:56 2012] Source does appear to be extended
[Thu Jan 19 02:39:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 03:18:08 2012] Writing source region out to fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1_src.reg
[Thu Jan 19 03:18:08 2012] Extracting stamp from image fullrun_ccd3_acisf12045_pi14-548_cl_sm2.00.img.gz, (718, 1156) - (885, 1324)
[Thu Jan 19 03:18:08 2012] Writing fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1.gif
[Thu Jan 19 03:18:12 2012] Size of ../../acisf12045/products/events/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1_src.evt.gz[events] = 246 counts
[Thu Jan 19 03:18:12 2012] Mean chipx,y = (869.94, 96.08)
[Thu Jan 19 03:18:12 2012] Mean tdetx,y = (5035.92, 3930.94)
[Thu Jan 19 03:18:12 2012] chipx,y range = (844.00-895.00, 73.00-123.00)
[Thu Jan 19 03:18:12 2012] Size of ../../acisf12045/products/events/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 234 counts
[Thu Jan 19 03:18:13 2012] rmf not found, will run specextract
[Thu Jan 19 03:18:13 2012] arf not found, will run specextract
[Thu Jan 19 03:18:28 2012] ../../acisf12045/products/spectra/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1.warf not found
[Thu Jan 19 03:18:28 2012] ../../acisf12045/products/spectra/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jan 19 03:18:28 2012] Removal of ../../acisf12045/products/spectra/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1.soff failed
[Thu Jan 19 03:35:19 2012] Keeping rmf generated by specextract
[Thu Jan 19 03:35:19 2012] 175.114
[Thu Jan 19 03:36:08 2012] Updating aperture counts using extracted products
[Thu Jan 19 03:36:08 2012] Error reading totcts from fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jan 19 03:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 03:36:09 2012] Using photon index=1.80, rate=0.00192, arf fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 03:36:09 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 03:36:09 2012] Updating source flux to 2.7e-14
[Thu Jan 19 03:36:47 2012] Reading fit data from acisf12045/analysis//spectral/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1_pl.csv
[Thu Jan 19 03:36:47 2012] Spectral fit parameter nH value = 3.11487e+21
[Thu Jan 19 03:36:47 2012] Spectral fit parameter PhoIndex value = 1.56391
[Thu Jan 19 03:36:47 2012] Failed to get F(0.3-8.0) from acisf12045/analysis//spectral/fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jan 19 03:36:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 03:36:47 2012] Using Nh = 3.1e+21, photon index=1.56, rate=0.00192, arf fullrun_ccd3_acisf12045_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 03:36:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 03:36:47 2012] Updating source flux to 2.8e-14