[Wed Jan 18 22:12:29 2012] Detection parameters:
  Position = (869.6, 232.4) = 3 32 11.79 -27 46 28.7
  Extent = 0.9" x 0.6", rotation angle = 29 degrees
  Source counts = 27.4 +/- 5.6
  Background counts = 3.6
  Rate = 0.0003 +/- 6e-05

[Wed Jan 18 22:12:30 2012] Off-axis axis estimate = 4.36'
[Wed Jan 18 22:48:41 2012] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 22:48:41 2012] Initial guess for spatial extent in simple fitting = 0.94"
[Wed Jan 18 22:48:41 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Wed Jan 18 22:48:41 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 0.94"
[Wed Jan 18 23:33:09 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass0_src19.ximg exists
[Wed Jan 18 23:33:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12045_pi14-548_cl_pass0_src19.csv
[Wed Jan 18 23:33:09 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Jan 18 23:33:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12045_pi14-548_cl_pass0_src19.csv
[Wed Jan 18 23:33:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12045_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12045_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 23:33:09 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Jan 18 23:33:09 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jan 18 23:33:09 2012] Fit fullrun_ccd1_acisf12045_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jan 19 00:33:01 2012] Spatial fit model total counts = 33.644500, observed total counts = 34.000000
[Thu Jan 19 00:33:01 2012] Offset between fit and detection position for source 17 = 0.894231 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.894231 pixels
  Position = (870.4, 232.9) = 3 32 11.78 -27 46 28.7
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 33.7 +/- 5.8
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Thu Jan 19 00:33:01 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 00:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 00:33:01 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 00:33:01 2012] Source does appear to be extended
[Thu Jan 19 00:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 01:09:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 01:09:09 2012] Initial guess for spatial extent in simple fitting = 1.13"
[Thu Jan 19 01:09:09 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.965
[Thu Jan 19 01:09:09 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 1.13"
[Thu Jan 19 01:43:02 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass1_src19.ximg exists
[Thu Jan 19 01:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12045_pi14-548_cl_pass1_src19.csv
[Thu Jan 19 01:43:02 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Jan 19 01:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12045_pi14-548_cl_pass1_src19.csv
[Thu Jan 19 01:43:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12045_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12045_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 01:43:02 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Jan 19 01:43:02 2012] fullrun_ccd1_acisf12045_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jan 19 01:43:02 2012] Fit fullrun_ccd1_acisf12045_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Jan 19 02:39:51 2012] Spatial fit model total counts = 31.275800, observed total counts = 33.000000
[Thu Jan 19 02:39:51 2012] Offset between fit and detection position for source 17 = 0.513807 pixels
[Thu Jan 19 02:39:51 2012] 31.750002 total counts/ 0.041302 bgd. counts: snr = 156.023968
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.513807 pixels
  Position = (869.9, 233.0) = 3 32 11.80 -27 46 28.7
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 31.7 +/- 5.6
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Thu Jan 19 02:39:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 02:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 02:39:51 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 02:39:51 2012] Source does appear to be extended
[Thu Jan 19 02:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 02:53:22 2012] Writing source region out to fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17_src.reg
[Thu Jan 19 02:53:22 2012] Extracting stamp from image fullrun_ccd1_acisf12045_pi14-548_cl_sm2.00.img.gz, (825, 188) - (915, 278)
[Thu Jan 19 02:53:22 2012] Writing fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17.gif
[Thu Jan 19 03:03:10 2012] Size of ../../acisf12045/products/events/fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17_src.evt.gz[events] = 33 counts
[Thu Jan 19 03:03:10 2012] Mean chipx,y = (428.45, 994.33)
[Thu Jan 19 03:03:10 2012] Mean tdetx,y = (4137.67, 4535.45)
[Thu Jan 19 03:03:10 2012] chipx,y range = (412.00-448.00, 980.00-1016.00)
[Thu Jan 19 03:03:10 2012] Size of ../../acisf12045/products/events/fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 81 counts
[Thu Jan 19 03:03:11 2012] Not generating rmf since there are only 31 counts
[Thu Jan 19 03:03:11 2012] arf not found, will run specextract
[Thu Jan 19 03:03:39 2012] ../../acisf12045/products/spectra/fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17.warf not found
[Thu Jan 19 03:03:39 2012] ../../acisf12045/products/spectra/fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17.wrmf not found
[Thu Jan 19 03:03:39 2012] Removal of ../../acisf12045/products/spectra/fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17.soff failed
[Thu Jan 19 03:08:07 2012] Spectrum 17 has only 32 counts, deleting rmf
[Thu Jan 19 03:08:07 2012] 184.649
[Thu Jan 19 03:36:08 2012] Updating aperture counts using extracted products
[Thu Jan 19 03:36:08 2012] Error reading totcts from fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17_src.pi.gz
[Thu Jan 19 03:36:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 03:36:08 2012] Using photon index=1.80, rate=0.000318, arf fullrun_ccd1_acisf12045_pi14-548_pass1_cl_src17.arf
[Thu Jan 19 03:36:08 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 03:36:08 2012] Updating source flux to 4.1e-15
[Thu Jan 19 03:36:21 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting