[Wed Jan 18 14:16:05 2012] Detection parameters:
  Position = (984.4, 714.9) = 3 32 39.75 -27 46 11.3
  Extent = 0.6" x 0.5", rotation angle = 87 degrees
  Source counts = 19.3 +/- 4.7
  Background counts = 2.7
  Rate = 0.0002 +/- 5e-05

[Wed Jan 18 14:16:07 2012] Off-axis axis estimate = 3.65'
[Wed Jan 18 15:51:32 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 15:51:32 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Wed Jan 18 15:51:32 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.016
[Wed Jan 18 15:51:32 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.73"
[Wed Jan 18 16:23:29 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src13.ximg exists
[Wed Jan 18 16:23:29 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Jan 18 16:23:29 2012] Fit fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src13 appears to have run properly
[Wed Jan 18 16:23:29 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Jan 18 16:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src13.csv
[Wed Jan 18 16:23:30 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jan 18 16:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src13.csv
[Wed Jan 18 16:23:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 16:33:26 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 20.569696 pixels away
[Wed Jan 18 16:33:26 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 16:33:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 16:33:26 2012] Assessing source extent using major
[Wed Jan 18 16:33:26 2012] Source does appear to be extended
[Wed Jan 18 16:33:26 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Wed Jan 18 17:53:22 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 17:53:22 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Wed Jan 18 17:53:22 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.016
[Wed Jan 18 17:53:22 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.73"
[Wed Jan 18 18:18:42 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass1_src13.ximg exists
[Wed Jan 18 18:18:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass1_src13.csv
[Wed Jan 18 18:18:42 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Jan 18 18:18:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass1_src13.csv
[Wed Jan 18 18:18:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12044_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12044_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 18:18:42 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Jan 18 18:18:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass1_tfrozen_src13.csv
[Wed Jan 18 18:18:42 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jan 18 18:18:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass1_tfrozen_src13.csv
[Wed Jan 18 18:18:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12044_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12044_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 18:28:01 2012] Source 6 is offset by -4.012686 and -5.696105 pixels which is larger than
2 X fitted extent = 1.164249 x 1.098086, not incorporating fit results
[Wed Jan 18 18:28:01 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 18:28:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 18:28:01 2012] Assessing source extent using major
[Wed Jan 18 18:28:01 2012] Source does appear to be extended
[Wed Jan 18 18:28:01 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Wed Jan 18 19:12:26 2012] Writing source region out to fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6_src.reg
[Wed Jan 18 19:12:26 2012] Extracting stamp from image fullrun_ccd3_acisf12044_pi14-548_cl_sm2.00.img.gz, (957, 688) - (1012, 742)
[Wed Jan 18 19:12:26 2012] Writing fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6.gif
[Wed Jan 18 19:18:39 2012] Size of ../../acisf12044/products/events/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6_src.evt.gz[events] = 22 counts
[Wed Jan 18 19:18:39 2012] Mean chipx,y = (797.18, 608.59)
[Wed Jan 18 19:18:39 2012] Mean tdetx,y = (4523.41, 3858.18)
[Wed Jan 18 19:18:39 2012] chipx,y range = (782.00-816.00, 589.00-629.00)
[Wed Jan 18 19:18:39 2012] Size of ../../acisf12044/products/events/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 31 counts
[Wed Jan 18 19:18:41 2012] Not generating rmf since there are only 19 counts
[Wed Jan 18 19:18:41 2012] arf not found, will run specextract
[Wed Jan 18 19:19:05 2012] ../../acisf12044/products/spectra/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6.warf not found
[Wed Jan 18 19:19:05 2012] ../../acisf12044/products/spectra/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6.wrmf not found
[Wed Jan 18 19:19:05 2012] Removal of ../../acisf12044/products/spectra/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6.soff failed
[Wed Jan 18 19:27:08 2012] Spectrum 6 has only 19 counts, deleting rmf
[Wed Jan 18 19:27:08 2012] 194.367
[Wed Jan 18 19:28:28 2012] Updating aperture counts using extracted products
[Wed Jan 18 19:28:28 2012] Error reading totcts from fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Jan 18 19:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 19:28:29 2012] Using photon index=1.80, rate=0.000194, arf fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src6.arf
[Wed Jan 18 19:28:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 19:28:29 2012] Updating source flux to 2.4e-15
[Wed Jan 18 19:28:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting