[Wed Jan 18 14:16:06 2012] Detection parameters:
  Position = (1189.0, 634.0) = 3 32 32.16 -27 46 51.1
  Extent = 0.6" x 0.5", rotation angle = 61 degrees
  Source counts = 11.0 +/- 3.6
  Background counts = 2.0
  Rate = 0.0001 +/- 4e-05

[Wed Jan 18 14:16:07 2012] Off-axis axis estimate = 2.16'
[Wed Jan 18 15:51:32 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 15:51:32 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Jan 18 15:51:32 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.503
[Wed Jan 18 15:51:32 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.45"
[Wed Jan 18 16:23:29 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src23.ximg exists
[Wed Jan 18 16:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src23.csv
[Wed Jan 18 16:23:29 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src23_1.ximg exists
[Wed Jan 18 16:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src23.csv
[Wed Jan 18 16:23:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12044_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 16:23:30 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Wed Jan 18 16:23:30 2012] fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Jan 18 16:23:30 2012] Fit fullrun_ccd3_acisf12044_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Jan 18 16:33:26 2012] Spatial fit model total counts = 20.680900, observed total counts = 21.000000
[Wed Jan 18 16:33:26 2012] Offset between fit and detection position for source 17 = 0.453638 pixels
[Wed Jan 18 16:33:26 2012] 20.602500 total counts/ 11.138200 bgd. counts: snr = 2.835835
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.453638 pixels
  Position = (1189.5, 634.1) = 3 32 32.17 -27 46 51.3
  Extent = 0.4 (0.1-0.7)", rotation angle = 0
  Source counts = 9.5 +/- 4.5
  Background counts = 11.1
  Rate = 0.0001 +/- 5e-05
[Wed Jan 18 16:33:26 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 16:33:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 16:33:26 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 16:33:26 2012] Source does appear to be extended
[Wed Jan 18 16:33:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 17:53:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 17:53:22 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Jan 18 17:53:22 2012] Spatial fitting skipped for pass 1: source                                 has 9.5 net counts, is at off-axis angle 2.2'
[Wed Jan 18 18:28:01 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 18:28:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 18:28:01 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 18:28:01 2012] Source does appear to be extended
[Wed Jan 18 18:28:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 19:12:26 2012] Writing source region out to fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17_src.reg
[Wed Jan 18 19:12:26 2012] Extracting stamp from image fullrun_ccd3_acisf12044_pi14-548_cl_sm2.00.img.gz, (1171, 615) - (1208, 653)
[Wed Jan 18 19:12:26 2012] Writing fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17.gif
[Wed Jan 18 19:24:12 2012] Size of ../../acisf12044/products/events/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17_src.evt.gz[events] = 12 counts
[Wed Jan 18 19:24:12 2012] Mean chipx,y = (957.42, 764.75)
[Wed Jan 18 19:24:12 2012] Mean tdetx,y = (4367.25, 4018.42)
[Wed Jan 18 19:24:12 2012] chipx,y range = (938.00-971.00, 750.00-783.00)
[Wed Jan 18 19:24:12 2012] Size of ../../acisf12044/products/events/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 21 counts
[Wed Jan 18 19:24:13 2012] Not generating rmf since there are only 9 counts
[Wed Jan 18 19:24:13 2012] arf not found, will run specextract
[Wed Jan 18 19:24:43 2012] ../../acisf12044/products/spectra/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17.warf not found
[Wed Jan 18 19:24:43 2012] ../../acisf12044/products/spectra/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17.wrmf not found
[Wed Jan 18 19:24:43 2012] Removal of ../../acisf12044/products/spectra/fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17.soff failed
[Wed Jan 18 19:27:08 2012] Spectrum 17 has only 9 counts, deleting rmf
[Wed Jan 18 19:27:08 2012] 201.844
[Wed Jan 18 19:28:29 2012] Updating aperture counts using extracted products
[Wed Jan 18 19:28:29 2012] Error reading totcts from fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17_src.pi.gz
[Wed Jan 18 19:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 19:28:29 2012] Using photon index=1.80, rate=9.51e-05, arf fullrun_ccd3_acisf12044_pi14-548_pass1_cl_src17.arf
[Wed Jan 18 19:28:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 19:28:29 2012] Updating source flux to 1.1e-15
[Wed Jan 18 19:28:57 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting