[Wed Jan 18 14:15:57 2012] Detection parameters:
  Position = (373.4, 900.6) = 3 32 27.00 -27 41 4.9
  Extent = 2.1" x 1.5", rotation angle = 41 degrees
  Source counts = 602.5 +/- 25.6
  Background counts = 52.5
  Rate = 0.006 +/- 0.0003

[Wed Jan 18 14:15:59 2012] Off-axis axis estimate = 7.79'
[Wed Jan 18 14:49:15 2012] Using EEF radius (= 2.68 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 14:49:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 14:49:15 2012] Initial guess for spatial extent in simple fitting = 2.68"
[Wed Jan 18 14:49:15 2012] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.016
[Wed Jan 18 14:49:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.68"
[Wed Jan 18 15:30:57 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass0_src1.ximg exists
[Wed Jan 18 15:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12044_pi14-548_cl_pass0_src1.csv
[Wed Jan 18 15:30:57 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Jan 18 15:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12044_pi14-548_cl_pass0_src1.csv
[Wed Jan 18 15:30:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12044_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12044_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 15:30:57 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 18 15:30:57 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 18 15:30:57 2012] Fit fullrun_ccd1_acisf12044_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 18 16:33:21 2012] Spatial fit model total counts = 711.988000, observed total counts = 712.000000
[Wed Jan 18 16:33:21 2012] Offset between fit and detection position for source 3 = 0.449338 pixels
[Wed Jan 18 16:33:21 2012] 713.758000 total counts/ 95.643000 bgd. counts: snr = 63.203727
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.449338 pixels
  Position = (373.8, 900.8) = 3 32 27.00 -27 41 5.1
  Extent = 2.1 (2.0-2.2)", rotation angle = 0
  Source counts = 618.1 +/- 26.7
  Background counts = 95.6
  Rate = 0.006 +/- 0.0003
[Wed Jan 18 16:33:21 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 16:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 16:33:21 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 16:33:21 2012] Source does appear to be extended
[Wed Jan 18 16:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 16:57:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 16:57:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 16:57:35 2012] Initial guess for spatial extent in simple fitting = 2.11"
[Wed Jan 18 16:57:35 2012] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.087
[Wed Jan 18 16:57:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.11"
[Wed Jan 18 17:31:34 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass1_src1.ximg exists
[Wed Jan 18 17:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12044_pi14-548_cl_pass1_src1.csv
[Wed Jan 18 17:31:34 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Jan 18 17:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12044_pi14-548_cl_pass1_src1.csv
[Wed Jan 18 17:31:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12044_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12044_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 17:31:34 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan 18 17:31:34 2012] fullrun_ccd1_acisf12044_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan 18 17:31:34 2012] Fit fullrun_ccd1_acisf12044_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 18 18:27:56 2012] Spatial fit model total counts = 688.442000, observed total counts = 686.000000
[Wed Jan 18 18:27:56 2012] Offset between fit and detection position for source 3 = 0.074451 pixels
[Wed Jan 18 18:27:56 2012] 690.363300 total counts/ 87.164300 bgd. counts: snr = 64.608743
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.074451 pixels
  Position = (373.7, 900.8) = 3 32 27.00 -27 41 5.1
  Extent = 2.0 (1.9-2.2)", rotation angle = 0
  Source counts = 603.2 +/- 26.3
  Background counts = 87.2
  Rate = 0.006 +/- 0.0003
[Wed Jan 18 18:27:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 18:27:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 18:27:56 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 18:27:56 2012] Source does appear to be extended
[Wed Jan 18 18:27:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 18:44:45 2012] Writing source region out to fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3_src.reg
[Wed Jan 18 18:44:45 2012] Extracting stamp from image fullrun_ccd1_acisf12044_pi14-548_cl_sm2.00.img.gz, (281, 808) - (467, 994)
[Wed Jan 18 18:44:45 2012] Writing fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3.gif
[Wed Jan 18 18:44:48 2012] Size of ../../acisf12044/products/events/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3_src.evt.gz[events] = 668 counts
[Wed Jan 18 18:44:48 2012] Mean chipx,y = (320.48, 177.35)
[Wed Jan 18 18:44:48 2012] Mean tdetx,y = (4954.65, 4427.48)
[Wed Jan 18 18:44:48 2012] chipx,y range = (288.00-347.00, 147.00-201.00)
[Wed Jan 18 18:44:48 2012] Size of ../../acisf12044/products/events/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 251 counts
[Wed Jan 18 18:44:49 2012] rmf not found, will run specextract
[Wed Jan 18 18:44:49 2012] arf not found, will run specextract
[Wed Jan 18 18:45:06 2012] ../../acisf12044/products/spectra/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3.warf not found
[Wed Jan 18 18:45:06 2012] ../../acisf12044/products/spectra/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3.wrmf not found
[Wed Jan 18 18:45:06 2012] Removal of ../../acisf12044/products/spectra/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3.soff failed
[Wed Jan 18 18:59:33 2012] Keeping rmf generated by specextract
[Wed Jan 18 18:59:33 2012] 162.409
[Wed Jan 18 19:28:27 2012] Updating aperture counts using extracted products
[Wed Jan 18 19:28:27 2012] Error reading totcts from fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Jan 18 19:28:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 19:28:28 2012] Using photon index=1.80, rate=0.00606, arf fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3.arf
[Wed Jan 18 19:28:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 19:28:28 2012] Updating source flux to 9.1e-14
[Wed Jan 18 19:28:54 2012] Reading fit data from acisf12044/analysis//spectral/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3_pl.csv
[Wed Jan 18 19:28:54 2012] Spectral fit parameter nH value = 3.0202e+13
[Wed Jan 18 19:28:54 2012] Spectral fit parameter PhoIndex value = 1.83095
[Wed Jan 18 19:28:54 2012] Failed to get F(0.3-8.0) from acisf12044/analysis//spectral/fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jan 18 19:28:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 19:28:54 2012] Using Nh = 3e+13, photon index=1.83, rate=0.00606, arf fullrun_ccd1_acisf12044_pi14-548_pass1_cl_src3.arf
[Wed Jan 18 19:28:54 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 19:28:54 2012] Updating source flux to 9.1e-14