[Wed Jan 18 01:40:59 2012] Detection parameters:
  Position = (702.1, 1065.8) = 3 32 47.91 -27 42 33.0
  Extent = 2.4" x 1.6", rotation angle = 52 degrees
  Source counts = 341.9 +/- 19.8
  Background counts = 52.1
  Rate = 0.003 +/- 0.0002

[Wed Jan 18 01:41:02 2012] Off-axis axis estimate = 7.60'
[Wed Jan 18 04:01:28 2012] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 04:01:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 04:01:28 2012] Initial guess for spatial extent in simple fitting = 2.56"
[Wed Jan 18 04:01:28 2012] source mask rpix=5.2, npix_max = 130, mask sum = 132, frac = 1.014
[Wed Jan 18 04:01:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.56"
[Wed Jan 18 04:42:07 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass0_src1.ximg exists
[Wed Jan 18 04:42:07 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Jan 18 04:42:07 2012] Fit fullrun_ccd3_acisf12043_pi14-548_cl_pass0_src1 appears to have run properly
[Wed Jan 18 04:42:08 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 18 04:42:08 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 18 04:42:08 2012] Fit fullrun_ccd3_acisf12043_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 18 05:53:42 2012] Spatial fit model total counts = 429.330000, observed total counts = 430.000000
[Wed Jan 18 05:53:42 2012] Offset between fit and detection position for source 2 = 0.421558 pixels
[Wed Jan 18 05:53:42 2012] 428.940000 total counts/ 112.945000 bgd. counts: snr = 29.733546
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.421558 pixels
  Position = (702.3, 1066.1) = 3 32 47.92 -27 42 33.1
  Extent = 2.4" x 1.5", rotation angle = 118
  Source counts = 316.0 +/- 20.7
  Background counts = 112.9
  Rate = 0.002 +/- 0.0002
[Wed Jan 18 05:53:42 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 05:53:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 05:53:42 2012] Assessing source extent using major
[Wed Jan 18 05:53:42 2012] Source does appear to be extended
[Wed Jan 18 05:53:42 2012] Computing asymmetry using major and minor axis, asym = 1.57
[Wed Jan 18 05:53:42 2012] Source is asymmetric
[Wed Jan 18 07:31:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 07:31:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 07:31:28 2012] Initial guess for spatial extent in simple fitting = 1.93"
[Wed Jan 18 07:31:28 2012] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.034
[Wed Jan 18 07:31:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.93"
[Wed Jan 18 08:06:48 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass1_src1.ximg exists
[Wed Jan 18 08:06:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12043_pi14-548_cl_pass1_src1.csv
[Wed Jan 18 08:06:48 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Jan 18 08:06:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12043_pi14-548_cl_pass1_src1.csv
[Wed Jan 18 08:06:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12043_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12043_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 08:06:48 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan 18 08:06:48 2012] fullrun_ccd3_acisf12043_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan 18 08:06:48 2012] Fit fullrun_ccd3_acisf12043_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 18 08:29:54 2012] Spatial fit model total counts = 380.999000, observed total counts = 381.000000
[Wed Jan 18 08:29:54 2012] Offset between fit and detection position for source 2 = 0.110234 pixels
[Wed Jan 18 08:29:54 2012] 381.727100 total counts/ 72.898100 bgd. counts: snr = 36.170955
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.110234 pixels
  Position = (702.2, 1066.1) = 3 32 47.93 -27 42 33.1
  Extent = 1.9 (1.7-2.1)", rotation angle = 0
  Source counts = 308.8 +/- 19.5
  Background counts = 72.9
  Rate = 0.002 +/- 0.0002
[Wed Jan 18 08:29:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 08:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 08:29:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 08:29:54 2012] Source does appear to be extended
[Wed Jan 18 08:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 09:21:51 2012] Writing source region out to fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2_src.reg
[Wed Jan 18 09:21:51 2012] Extracting stamp from image fullrun_ccd3_acisf12043_pi14-548_cl_sm2.00.img.gz, (615, 979) - (789, 1153)
[Wed Jan 18 09:21:51 2012] Writing fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2.gif
[Wed Jan 18 09:21:53 2012] Size of ../../acisf12043/products/events/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2_src.evt.gz[events] = 373 counts
[Wed Jan 18 09:21:53 2012] Mean chipx,y = (686.69, 136.21)
[Wed Jan 18 09:21:53 2012] Mean tdetx,y = (4995.79, 3747.69)
[Wed Jan 18 09:21:53 2012] chipx,y range = (656.00-716.00, 108.00-166.00)
[Wed Jan 18 09:21:53 2012] Size of ../../acisf12043/products/events/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 360 counts
[Wed Jan 18 09:21:54 2012] rmf not found, will run specextract
[Wed Jan 18 09:21:54 2012] arf not found, will run specextract
[Wed Jan 18 09:22:10 2012] ../../acisf12043/products/spectra/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2.warf not found
[Wed Jan 18 09:22:10 2012] ../../acisf12043/products/spectra/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2.wrmf not found
[Wed Jan 18 09:22:10 2012] Removal of ../../acisf12043/products/spectra/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2.soff failed
[Wed Jan 18 09:41:09 2012] Keeping rmf generated by specextract
[Wed Jan 18 09:41:09 2012] 174.294
[Wed Jan 18 09:44:14 2012] Updating aperture counts using extracted products
[Wed Jan 18 09:44:14 2012] Error reading totcts from fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Jan 18 09:44:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 09:44:14 2012] Using photon index=1.80, rate=0.00238, arf fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2.arf
[Wed Jan 18 09:44:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 09:44:14 2012] Updating source flux to 3.3e-14
[Wed Jan 18 09:44:59 2012] Reading fit data from acisf12043/analysis//spectral/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2_pl.csv
[Wed Jan 18 09:44:59 2012] Spectral fit parameter nH value = 3.15383e+21
[Wed Jan 18 09:44:59 2012] Spectral fit parameter PhoIndex value = 1.82012
[Wed Jan 18 09:44:59 2012] Failed to get F(0.3-8.0) from acisf12043/analysis//spectral/fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jan 18 09:44:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 09:44:59 2012] Using Nh = 3.2e+21, photon index=1.82, rate=0.00238, arf fullrun_ccd3_acisf12043_pi14-548_pass1_cl_src2.arf
[Wed Jan 18 09:44:59 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 09:44:59 2012] Updating source flux to 3.2e-14