[Sun Oct 30 02:22:59 2011] Detection parameters:
  Position = (140.5, 530.1) = 5 19 49.84 -45 46 42.9
  Extent = 0.6" x 0.5", rotation angle = 43 degrees
  Source counts = 2535.7 +/- 52.5
  Background counts = 215.3
  Rate = 0.1 +/- 0.002

[Sun Oct 30 02:23:03 2011] Off-axis axis estimate = 0.86'
[Sun Oct 30 02:23:51 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 02:23:51 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 30 02:23:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Sun Oct 30 02:23:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Sun Oct 30 02:23:52 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 02:23:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12039_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 02:23:52 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 02:23:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12039_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 02:23:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12039_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12039_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 02:23:53 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 02:23:53 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 02:23:53 2011] Fit fullrun_ccd7_acisf12039_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 02:24:05 2011] Spatial fit model total counts = 3542.930000, observed total counts = 3544.000000
[Sun Oct 30 02:24:05 2011] Offset between fit and detection position for source 2 = 2.561740 pixels
[Sun Oct 30 02:24:05 2011] 3557.694000 total counts/ 793.504000 bgd. counts: snr = 98.128087
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.561740 pixels
  Position = (142.4, 528.5) = 5 19 49.77 -45 46 44.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 2764.2 +/- 59.6
  Background counts = 793.5
  Rate = 0.1 +/- 0.003
[Sun Oct 30 02:24:05 2011] Spatial fit model total counts = 3560.910000, observed total counts = 3568.000000
[Sun Oct 30 02:24:05 2011] Offset between fit and detection position for source 2 = 0.140616 pixels
[Sun Oct 30 02:24:05 2011] Warning, changing simple spatial fit ID from 1 to 3
[Sun Oct 30 02:24:05 2011] 3568.578000 total counts/ 639.328000 bgd. counts: snr = 115.849610
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.140616 pixels
  Position = (142.5, 528.4) = 5 19 49.77 -45 46 44.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 2929.2 +/- 59.7
  Background counts = 639.3
  Rate = 0.1 +/- 0.003
[Sun Oct 30 02:24:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 02:24:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 02:24:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 02:24:05 2011] Source does appear to be extended
[Sun Oct 30 02:24:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 02:24:05 2011] Source is confused with source 9
[Sun Oct 30 02:24:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 02:24:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 02:24:25 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sun Oct 30 02:24:25 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sun Oct 30 02:24:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Sun Oct 30 02:24:26 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 02:24:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12039_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 02:24:26 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 02:24:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12039_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 02:24:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12039_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12039_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 02:24:27 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 02:24:27 2011] fullrun_ccd7_acisf12039_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 02:24:27 2011] Fit fullrun_ccd7_acisf12039_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 02:24:38 2011] Spatial fit model total counts = 4369.990000, observed total counts = 4370.000000
[Sun Oct 30 02:24:38 2011] Offset between fit and detection position for source 2 = 0.033756 pixels
[Sun Oct 30 02:24:38 2011] 4335.677000 total counts/ 842.387000 bgd. counts: snr = 120.359067
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.033756 pixels
  Position = (142.5, 528.4) = 5 19 49.77 -45 46 44.0
  Extent = 1.7 (1.6-1.8)", rotation angle = 0
  Source counts = 3493.3 +/- 65.8
  Background counts = 842.4
  Rate = 0.1 +/- 0.003
[Sun Oct 30 02:24:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 02:24:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 02:24:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 02:24:38 2011] Source does appear to be extended
[Sun Oct 30 02:24:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 02:25:52 2011] Not overwriting source region fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 30 02:25:52 2011] Extracting stamp from image fullrun_ccd7_acisf12039_pi14-548_cl_sm2.00.img.gz, (65, 450) - (220, 606)
[Sun Oct 30 02:25:52 2011] Writing fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2.gif
[Sun Oct 30 02:25:53 2011] ../../acisf12039/products/events/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.evt and ../../acisf12039/products/events/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 30 02:25:53 2011] Size of ../../acisf12039/products/events/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.evt.gz[events] = 4439 counts
[Sun Oct 30 02:25:53 2011] Mean chipx,y = (106.21, 553.91)
[Sun Oct 30 02:25:53 2011] Mean tdetx,y = (4023.21, 2255.91)
[Sun Oct 30 02:25:53 2011] chipx,y range = (77.00-135.00, 524.00-584.00)
[Sun Oct 30 02:25:53 2011] Size of ../../acisf12039/products/events/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1188 counts
[Sun Oct 30 02:25:53 2011] ../../acisf12039/products/images/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.img and ../../acisf12039/products/images/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 30 02:25:53 2011] ../../acisf12039/products/spectra/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.pi and ../../acisf12039/products/spectra/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 30 02:25:56 2011] ../../acisf12039/products/lightcurves/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.lc and ../../acisf12039/products/lightcurves/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 30 02:27:18 2011] Keeping rmf generated by specextract
[Sun Oct 30 02:27:18 2011] 231.706
[Sun Oct 30 02:27:21 2011] Updating aperture counts using extracted products
[Sun Oct 30 02:27:21 2011] Error reading totcts from fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 30 02:27:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 02:27:22 2011] Using photon index=1.80, rate=0.147, arf fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 02:27:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 02:27:22 2011] Updating source flux to 1.1e-12
[Sun Oct 30 02:27:36 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Oct 30 02:27:50 2011] Reading fit data from acisf12039/analysis//spectral/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_pl.csv
[Sun Oct 30 02:27:50 2011] Spectral fit parameter nH value = 6.21164e+13
[Sun Oct 30 02:27:50 2011] Spectral fit parameter PhoIndex value = 1.26568
[Sun Oct 30 02:27:50 2011] Failed to get F(0.3-8.0) from acisf12039/analysis//spectral/fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 02:27:50 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 02:27:50 2011] Using Nh = 6.2e+13, photon index=1.27, rate=0.147, arf fullrun_ccd7_acisf12039_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 02:27:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 02:27:51 2011] Updating source flux to 1.4e-12