[Fri Oct 21 09:09:14 2011] Detection parameters: Position = (529.8, 574.6) = 3 19 45.96 41 29 54.7 Extent = 0.5" x 0.5", rotation angle = 138 degrees Source counts = 47.8 +/- 16.1 Background counts = 212.2 Rate = 0.0006 +/- 0.0002 [Fri Oct 21 09:09:36 2011] Off-axis axis estimate = 5.08' [Fri Oct 21 09:22:46 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting [Fri Oct 21 09:22:46 2011] Initial guess for spatial extent in simple fitting = 1.21" [Fri Oct 21 09:22:46 2011] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.938 [Fri Oct 21 09:22:46 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 1.21" [Fri Oct 21 09:22:51 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src80.ximg exists [Fri Oct 21 09:22:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src80.csv [Fri Oct 21 09:22:51 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src80_1.ximg exists [Fri Oct 21 09:22:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src80.csv [Fri Oct 21 09:22:51 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src80_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 21 09:22:54 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_tfrozen_src80.ximg exists [Fri Oct 21 09:22:54 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_tfrozen_src80_1.ximg exists [Fri Oct 21 09:22:54 2011] Fit fullrun_ccd1_acisf12037_pi14-548_cl_pass0_tfrozen_src80 appears to have run properly [Fri Oct 21 09:23:22 2011] Spatial fit model total counts = 4655.950000, observed total counts = 4683.000000 [Fri Oct 21 09:23:22 2011] Offset between fit and detection position for source 60 = 1.115085 pixels [Fri Oct 21 09:23:22 2011] 4638.707500 total counts/ 4605.210000 bgd. counts: snr = 0.493614 Spatial fit parameters: Offset between fit and detection position for source 60 = 1.115085 pixels Position = (528.7, 574.6) = 3 19 46.03 41 29 54.5 Extent = 0.3 (0.3-0.8)", rotation angle = 0 Source counts = 33.5 +/- 68.1 Background counts = 4605.2 Rate = 0.0004 +/- 0.0008 Deleting source due to low Poisson probability