[Fri Oct 21 09:09:13 2011] Detection parameters:
  Position = (398.8, 1061.3) = 3 19 51.70 41 33 54.2
  Extent = 1.4" x 1.3", rotation angle = 124 degrees
  Source counts = 139.5 +/- 38.8
  Background counts = 1362.5
  Rate = 0.002 +/- 0.0005

[Fri Oct 21 09:09:36 2011] Off-axis axis estimate = 9.19'
[Fri Oct 21 09:22:46 2011] Using EEF radius (= 3.73 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 09:22:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 09:22:46 2011] Initial guess for spatial extent in simple fitting = 3.73"
[Fri Oct 21 09:22:46 2011] source mask rpix=7.6, npix_max = 261, mask sum = 256, frac = 0.980
[Fri Oct 21 09:22:46 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 3.73"
[Fri Oct 21 09:22:50 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src33.ximg exists
[Fri Oct 21 09:22:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src33.csv
[Fri Oct 21 09:22:50 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Oct 21 09:22:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src33.csv
[Fri Oct 21 09:22:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12037_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 09:22:52 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Oct 21 09:22:52 2011] fullrun_ccd1_acisf12037_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Oct 21 09:22:52 2011] Fit fullrun_ccd1_acisf12037_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Oct 21 09:23:22 2011] Spatial fit model total counts = 3772.680000, observed total counts = 3775.000000
[Fri Oct 21 09:23:22 2011] Offset between fit and detection position for source 49 = 3.379880 pixels
[Fri Oct 21 09:23:22 2011] 3774.704000 total counts/ 3715.360000 bgd. counts: snr = 0.973591
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 3.379880 pixels
  Position = (402.2, 1061.0) = 3 19 51.57 41 33 53.8
  Extent = 1.9 (0.9-7.5)", rotation angle = 0
  Source counts = 59.3 +/- 61.4
  Background counts = 3715.4
  Rate = 0.0007 +/- 0.0007
  Deleting source due to low Poisson probability