[Sun Sep 25 22:16:30 2011] Detection parameters:
  Position = (1037.0, 761.8) = 3 19 46.18 41 37 37.1
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 232.9 +/- 16.3
  Background counts = 32.1
  Rate = 0.005 +/- 0.0003

[Sun Sep 25 22:16:33 2011] Off-axis axis estimate = 2.95'
[Sun Sep 25 22:24:09 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:24:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 22:24:09 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Sep 25 22:24:09 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.089
[Sun Sep 25 22:24:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.57"
[Sun Sep 25 22:24:10 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 22:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12036_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 22:24:10 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 22:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12036_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 22:24:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12036_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12036_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:24:12 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 22:24:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12036_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Sep 25 22:24:12 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 22:24:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12036_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Sep 25 22:24:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12036_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12036_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:24:57 2011] Spatial fit model total counts = 405.006000, observed total counts = 483.000000
[Sun Sep 25 22:24:57 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Sep 25 22:24:57 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:24:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:24:57 2011] Assessing source extent using major
[Sun Sep 25 22:24:57 2011] Source does appear to be extended
[Sun Sep 25 22:24:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:25:35 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:25:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 22:25:35 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Sep 25 22:25:35 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.089
[Sun Sep 25 22:25:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.57"
[Sun Sep 25 22:25:36 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 22:25:36 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 22:25:36 2011] Fit fullrun_ccd3_acisf12036_pi14-548_cl_pass1_src1 appears to have run properly
[Sun Sep 25 22:25:36 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 22:25:36 2011] fullrun_ccd3_acisf12036_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 22:25:37 2011] Fit fullrun_ccd3_acisf12036_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 22:25:54 2011] Spatial fit model total counts = 466.144000, observed total counts = 483.000000
[Sun Sep 25 22:25:54 2011] Offset between fit and detection position for source 2 = 0.995504 pixels
[Sun Sep 25 22:25:54 2011] 429.105000 total counts/ 234.278000 bgd. counts: snr = 12.728681
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.995504 pixels
  Position = (1037.7, 762.4) = 3 19 46.17 41 37 37.1
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 194.8 +/- 20.7
  Background counts = 234.3
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 22:25:54 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:25:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:25:54 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:25:54 2011] Source does appear to be extended
[Sun Sep 25 22:25:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:29:30 2011] Not overwriting source region fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.reg
[Sun Sep 25 22:29:30 2011] Extracting stamp from image fullrun_ccd3_acisf12036_pi14-548_cl_sm2.00.img.gz, (1017, 741) - (1059, 783)
[Sun Sep 25 22:29:30 2011] Writing fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2.gif
[Sun Sep 25 22:29:31 2011] ../../acisf12036/products/events/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.evt and ../../acisf12036/products/events/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Sep 25 22:29:31 2011] Size of ../../acisf12036/products/events/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.evt.gz[events] = 235 counts
[Sun Sep 25 22:29:31 2011] Mean chipx,y = (735.92, 736.12)
[Sun Sep 25 22:29:31 2011] Mean tdetx,y = (4395.88, 3796.92)
[Sun Sep 25 22:29:31 2011] chipx,y range = (717.00-756.00, 718.00-754.00)
[Sun Sep 25 22:29:31 2011] Size of ../../acisf12036/products/events/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 165 counts
[Sun Sep 25 22:29:31 2011] ../../acisf12036/products/images/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.img and ../../acisf12036/products/images/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Sep 25 22:29:31 2011] ../../acisf12036/products/spectra/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.pi and ../../acisf12036/products/spectra/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Sep 25 22:29:34 2011] ../../acisf12036/products/lightcurves/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.lc and ../../acisf12036/products/lightcurves/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Sep 25 22:30:01 2011] Keeping rmf generated by specextract
[Sun Sep 25 22:30:01 2011] 195.432
[Sun Sep 25 22:30:16 2011] Updating aperture counts using extracted products
[Sun Sep 25 22:30:16 2011] Error reading totcts from fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Sep 25 22:30:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 22:30:16 2011] Using photon index=1.80, rate=0.00407, arf fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2.arf
[Sun Sep 25 22:30:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 22:30:16 2011] Updating source flux to 4.7e-14
[Sun Sep 25 22:32:22 2011] Flag p found in src. 2 procflags, skipping spectral fitting
[Sun Sep 25 22:32:55 2011] Reading fit data from acisf12036/analysis//spectral/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_pl.csv
[Sun Sep 25 22:32:55 2011] Spectral fit parameter nH value = 1.68099e+16
[Sun Sep 25 22:32:55 2011] Spectral fit parameter PhoIndex value = 1.82829
[Sun Sep 25 22:32:55 2011] Failed to get F(0.3-8.0) from acisf12036/analysis//spectral/fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 22:32:55 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 22:32:55 2011] Using Nh = 1.7e+16, photon index=1.83, rate=0.00407, arf fullrun_ccd3_acisf12036_pi14-548_pass1_cl_src2.arf
[Sun Sep 25 22:32:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 22:32:55 2011] Updating source flux to 5e-14