[Sun Sep 25 22:16:21 2011] Detection parameters:
  Position = (319.6, 592.4) = 3 19 43.80 41 30 40.2
  Extent = 0.7" x 0.7", rotation angle = 34 degrees
  Source counts = 64.4 +/- 31.0
  Background counts = 896.6
  Rate = 0.001 +/- 0.0006

[Sun Sep 25 22:16:29 2011] Off-axis axis estimate = 7.19'
[Sun Sep 25 22:24:00 2011] Using EEF radius (= 2.29 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:24:00 2011] Initial guess for spatial extent in simple fitting = 2.29"
[Sun Sep 25 22:24:00 2011] source mask rpix=4.7, npix_max = 106, mask sum = 119, frac = 1.116
[Sun Sep 25 22:24:00 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 2.29"
[Sun Sep 25 22:24:03 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass0_src37.ximg exists
[Sun Sep 25 22:24:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12036_pi14-548_cl_pass0_src37.csv
[Sun Sep 25 22:24:03 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass0_src37_1.ximg exists
[Sun Sep 25 22:24:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12036_pi14-548_cl_pass0_src37.csv
[Sun Sep 25 22:24:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12036_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12036_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:24:05 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Sun Sep 25 22:24:05 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Sep 25 22:24:05 2011] Fit fullrun_ccd2_acisf12036_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Sep 25 22:24:53 2011] Source 29 is offset by -2.429550 and -1.561107 pixels which is larger than
2 X fitted extent = 2.291740 x 2.291740, not incorporating fit results
[Sun Sep 25 22:24:53 2011] Spatial fit model total counts = 5591.970000, observed total counts = 5599.000000
[Sun Sep 25 22:24:53 2011] Offset between fit and detection position for source 29 = 6.028486 pixels
[Sun Sep 25 22:24:53 2011] 5526.023000 total counts/ 5000.830000 bgd. counts: snr = 7.426734
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 6.028486 pixels
  Position = (317.2, 598.0) = 3 19 43.93 41 30 42.7
  Extent = 4.6 (4.5-9.2)", rotation angle = 0
  Source counts = 525.2 +/- 74.3
  Background counts = 5000.8
  Rate = 0.01 +/- 0.002
[Sun Sep 25 22:24:53 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:24:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:24:53 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:24:53 2011] Source does appear to be extended
[Sun Sep 25 22:24:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:25:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:25:26 2011] Initial guess for spatial extent in simple fitting = 4.59"
[Sun Sep 25 22:25:26 2011] source mask rpix=9.3, npix_max = 386, mask sum = 381, frac = 0.987
[Sun Sep 25 22:25:26 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 4.59"
[Sun Sep 25 22:25:32 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass1_src17.ximg exists
[Sun Sep 25 22:25:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12036_pi14-548_cl_pass1_src17.csv
[Sun Sep 25 22:25:32 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass1_src17_1.ximg exists
[Sun Sep 25 22:25:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12036_pi14-548_cl_pass1_src17.csv
[Sun Sep 25 22:25:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12036_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12036_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:25:33 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sun Sep 25 22:25:33 2011] fullrun_ccd2_acisf12036_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Sep 25 22:25:33 2011] Fit fullrun_ccd2_acisf12036_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Sep 25 22:25:53 2011] Warning, spatial fit 17 centroid is now closest to src. 36
[Sun Sep 25 22:25:53 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:25:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:25:53 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:25:53 2011] Source does appear to be extended
[Sun Sep 25 22:25:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:28:14 2011] Not overwriting source region fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.reg
[Sun Sep 25 22:28:14 2011] Extracting stamp from image fullrun_ccd2_acisf12036_pi14-548_cl_sm2.00.img.gz, (107, 388) - (527, 808)
[Sun Sep 25 22:28:14 2011] Writing fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29.gif
[Sun Sep 25 22:29:20 2011] ../../acisf12036/products/events/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.evt and ../../acisf12036/products/events/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun Sep 25 22:29:20 2011] Size of ../../acisf12036/products/events/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.evt.gz[events] = 30229 counts
[Sun Sep 25 22:29:20 2011] Mean chipx,y = (891.99, 740.27)
[Sun Sep 25 22:29:20 2011] Mean tdetx,y = (3801.27, 3194.01)
[Sun Sep 25 22:29:20 2011] chipx,y range = (837.00-946.00, 685.00-794.00)
[Sun Sep 25 22:29:20 2011] Size of ../../acisf12036/products/events/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 160729 counts
[Sun Sep 25 22:29:20 2011] ../../acisf12036/products/images/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.img and ../../acisf12036/products/images/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun Sep 25 22:29:20 2011] ../../acisf12036/products/spectra/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.pi and ../../acisf12036/products/spectra/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun Sep 25 22:29:23 2011] ../../acisf12036/products/lightcurves/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.lc and ../../acisf12036/products/lightcurves/fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun Sep 25 22:29:30 2011] Keeping rmf generated by specextract
[Sun Sep 25 22:29:30 2011] 161.384
[Sun Sep 25 22:30:15 2011] Updating aperture counts using extracted products
[Sun Sep 25 22:30:15 2011] Error reading totcts from fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29_src.pi.gz
[Sun Sep 25 22:30:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 22:30:16 2011] Using photon index=1.80, rate=0.011, arf fullrun_ccd2_acisf12036_pi14-548_pass1_cl_src29.arf
[Sun Sep 25 22:30:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 22:30:16 2011] Updating source flux to 1.5e-13
[Sun Sep 25 22:30:32 2011] Flag b found in src. 29 procflags, skipping spectral fitting