[Fri Sep 30 00:45:35 2011] Detection parameters:
  Position = (76.3, 523.6) = 6 9 28.48 24 14 6.7
  Extent = 0.5" x 0.5", rotation angle = 28 degrees
  Source counts = 106.0 +/- 10.4
  Background counts = 3.0
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 4.28'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Sep 30 00:47:09 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.118
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.92"
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 30 00:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 30 00:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 00:47:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 30 00:47:14 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 107.182000, observed total counts = 109.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 7 = 0.646122 pixels
[Fri Sep 30 00:47:43 2011] 105.310100 total counts/ 13.280700 bgd. counts: snr = 25.253182
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.646122 pixels
  Position = (76.7, 524.2) = 6 9 28.49 24 14 6.8
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 92.0 +/- 10.3
  Background counts = 13.3
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 30 00:48:19 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.107
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.69"
[Fri Sep 30 00:48:20 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src5.ximg exists
[Fri Sep 30 00:48:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 00:48:20 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Sep 30 00:48:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 00:48:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 30 00:48:21 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 108.941000, observed total counts = 109.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 7 = 0.031012 pixels
[Fri Sep 30 00:48:53 2011] 106.410800 total counts/ 11.036200 bgd. counts: snr = 28.709323
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.031012 pixels
  Position = (76.7, 524.2) = 6 9 28.49 24 14 6.8
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 95.4 +/- 10.3
  Background counts = 11.0
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:28 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.reg
[Fri Sep 30 00:56:28 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (46, 493) - (108, 555)
[Fri Sep 30 00:56:28 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7.gif
[Fri Sep 30 00:56:45 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Sep 30 00:56:45 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.evt.gz[events] = 102 counts
[Fri Sep 30 00:56:45 2011] Mean chipx,y = (965.24, 505.26)
[Fri Sep 30 00:56:45 2011] Mean tdetx,y = (4626.74, 4026.24)
[Fri Sep 30 00:56:45 2011] chipx,y range = (947.00-985.00, 485.00-523.00)
[Fri Sep 30 00:56:45 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 21 counts
[Fri Sep 30 00:56:45 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Sep 30 00:56:45 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Sep 30 00:56:45 2011] Not generating rmf since there are only 95 counts
[Fri Sep 30 00:56:49 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:51 2011] 193.353
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.00169, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src7.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 2.1e-14
[Fri Sep 30 01:00:47 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting