[Fri Sep 30 00:45:37 2011] Detection parameters:
  Position = (590.0, 1002.9) = 6 9 10.00 24 18 2.5
  Extent = 0.8" x 0.5", rotation angle = 78 degrees
  Source counts = 18.7 +/- 4.5
  Background counts = 1.3
  Rate = 0.0003 +/- 8e-05

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 4.07'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Sep 30 00:47:09 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 0.85"
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src36.ximg exists
[Fri Sep 30 00:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src36.csv
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src36_1.ximg exists
[Fri Sep 30 00:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src36.csv
[Fri Sep 30 00:47:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Sep 30 00:47:15 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 22.828900, observed total counts = 23.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 34 = 1.271564 pixels
[Fri Sep 30 00:47:43 2011] 22.445510 total counts/ 6.067910 bgd. counts: snr = 6.648607
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.271564 pixels
  Position = (590.7, 1004.0) = 6 9 9.99 24 18 2.8
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.4 +/- 4.7
  Background counts = 6.1
  Rate = 0.0003 +/- 8e-05
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Sep 30 00:48:19 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.071
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.58"
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src36.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src36.csv
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src36_1.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src36.csv
[Fri Sep 30 00:48:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Sep 30 00:48:22 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 22.834000, observed total counts = 23.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 34 = 0.057753 pixels
[Fri Sep 30 00:48:53 2011] 22.782170 total counts/ 6.822970 bgd. counts: snr = 6.109763
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.057753 pixels
  Position = (590.8, 1004.0) = 6 9 9.99 24 18 2.8
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 16.0 +/- 4.8
  Background counts = 6.8
  Rate = 0.0003 +/- 8e-05
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:29 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.reg
[Fri Sep 30 00:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (565, 978) - (617, 1030)
[Fri Sep 30 00:56:29 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34.gif
[Fri Sep 30 00:58:27 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_bgd.evt exist, delete to re-create
[Fri Sep 30 00:58:27 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.evt.gz[events] = 19 counts
[Fri Sep 30 00:58:27 2011] Mean chipx,y = (455.37, 987.89)
[Fri Sep 30 00:58:27 2011] Mean tdetx,y = (4144.11, 3516.37)
[Fri Sep 30 00:58:27 2011] chipx,y range = (438.00-472.00, 969.00-1004.00)
[Fri Sep 30 00:58:27 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 14 counts
[Fri Sep 30 00:58:27 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_bgd.img exist, delete to re-create
[Fri Sep 30 00:58:27 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_bgd.pi exist, delete to re-create
[Fri Sep 30 00:58:27 2011] Not generating rmf since there are only 15 counts
[Fri Sep 30 00:58:30 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:52 2011] 183.486
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.000283, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src34.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 3.7e-15
[Fri Sep 30 01:00:47 2011] Source 34 has fewer than 100.000000 counts, skipping spectral fitting