[Fri Sep 30 00:45:37 2011] Detection parameters:
  Position = (353.0, 963.2) = 6 9 18.52 24 17 43.0
  Extent = 0.7" x 0.5", rotation angle = 129 degrees
  Source counts = 13.8 +/- 3.9
  Background counts = 1.2
  Rate = 0.0002 +/- 7e-05

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 2.22'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 30 00:47:09 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.740
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 0.45"
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src47.ximg exists
[Fri Sep 30 00:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src47.csv
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src47_1.ximg exists
[Fri Sep 30 00:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src47.csv
[Fri Sep 30 00:47:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:16 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Fri Sep 30 00:47:16 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Sep 30 00:47:16 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 17.014000, observed total counts = 17.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 33 = 0.926800 pixels
[Fri Sep 30 00:47:43 2011] 17.284230 total counts/ 4.431330 bgd. counts: snr = 6.105681
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.926800 pixels
  Position = (353.9, 963.4) = 6 9 18.51 24 17 42.9
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.9 +/- 4.2
  Background counts = 4.4
  Rate = 0.0002 +/- 7e-05
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Sep 30 00:48:19 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.049
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 0.47"
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src47.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src47.csv
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src47_1.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src47.csv
[Fri Sep 30 00:48:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src47.ximg exists
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src47_1.ximg exists
[Fri Sep 30 00:48:22 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src47 appears to have run properly
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 18.015400, observed total counts = 18.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 33 = 0.029977 pixels
[Fri Sep 30 00:48:53 2011] 18.097300 total counts/ 5.489300 bgd. counts: snr = 5.381306
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.029977 pixels
  Position = (354.0, 963.4) = 6 9 18.51 24 17 42.9
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 12.6 +/- 4.3
  Background counts = 5.5
  Rate = 0.0002 +/- 8e-05
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:29 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.reg
[Fri Sep 30 00:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (333, 943) - (375, 984)
[Fri Sep 30 00:56:29 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33.gif
[Fri Sep 30 00:58:59 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Fri Sep 30 00:58:59 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.evt.gz[events] = 14 counts
[Fri Sep 30 00:58:59 2011] Mean chipx,y = (684.86, 944.79)
[Fri Sep 30 00:58:59 2011] Mean tdetx,y = (4187.21, 3745.86)
[Fri Sep 30 00:58:59 2011] chipx,y range = (675.00-704.00, 929.00-962.00)
[Fri Sep 30 00:58:59 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 7 counts
[Fri Sep 30 00:58:59 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Fri Sep 30 00:58:59 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Fri Sep 30 00:58:59 2011] Not generating rmf since there are only 12 counts
[Fri Sep 30 00:59:02 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:52 2011] 195.127
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.000224, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src33.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 2.8e-15
[Fri Sep 30 01:00:47 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting