[Fri Sep 30 00:45:36 2011] Detection parameters:
  Position = (332.8, 920.9) = 6 9 19.25 24 17 22.2
  Extent = 0.5" x 0.5", rotation angle = 65 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0002 +/- 7e-05

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 2.20'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 30 00:47:09 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.118
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 0.45"
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src43.ximg exists
[Fri Sep 30 00:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src43.csv
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src43_1.ximg exists
[Fri Sep 30 00:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src43.csv
[Fri Sep 30 00:47:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Sep 30 00:47:15 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 19.649700, observed total counts = 19.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 31 = 0.746285 pixels
[Fri Sep 30 00:47:43 2011] 19.271950 total counts/ 4.599850 bgd. counts: snr = 6.841013
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.746285 pixels
  Position = (333.4, 921.3) = 6 9 19.25 24 17 22.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.7 +/- 4.4
  Background counts = 4.6
  Rate = 0.0003 +/- 8e-05
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 00:48:19 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.173
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 0.44"
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src43.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src43.csv
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src43_1.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src43.csv
[Fri Sep 30 00:48:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src43.ximg exists
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Sep 30 00:48:22 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 19.077100, observed total counts = 19.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 31 = 0.023634 pixels
[Fri Sep 30 00:48:53 2011] 18.664300 total counts/ 4.402700 bgd. counts: snr = 6.796866
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.023634 pixels
  Position = (333.3, 921.3) = 6 9 19.25 24 17 22.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.3 +/- 4.3
  Background counts = 4.4
  Rate = 0.0003 +/- 8e-05
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:29 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.reg
[Fri Sep 30 00:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (315, 903) - (352, 940)
[Fri Sep 30 00:56:29 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31.gif
[Fri Sep 30 00:58:47 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Sep 30 00:58:47 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.evt.gz[events] = 15 counts
[Fri Sep 30 00:58:47 2011] Mean chipx,y = (708.00, 904.27)
[Fri Sep 30 00:58:47 2011] Mean tdetx,y = (4227.73, 3769.00)
[Fri Sep 30 00:58:47 2011] chipx,y range = (695.00-726.00, 887.00-922.00)
[Fri Sep 30 00:58:47 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 11 counts
[Fri Sep 30 00:58:47 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Sep 30 00:58:47 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Sep 30 00:58:47 2011] Not generating rmf since there are only 14 counts
[Fri Sep 30 00:58:50 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:52 2011] 196.153
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.000253, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src31.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 3.1e-15
[Fri Sep 30 01:00:47 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting