[Fri Sep 30 00:45:36 2011] Detection parameters:
  Position = (620.9, 815.8) = 6 9 8.89 24 16 30.4
  Extent = 0.9" x 0.5", rotation angle = 63 degrees
  Source counts = 14.6 +/- 4.0
  Background counts = 1.4
  Rate = 0.0003 +/- 7e-05

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 4.70'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Sep 30 00:47:09 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.054
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 1.07"
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src42.ximg exists
[Fri Sep 30 00:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src42.csv
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src42_1.ximg exists
[Fri Sep 30 00:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src42.csv
[Fri Sep 30 00:47:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Sep 30 00:47:15 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 18.221700, observed total counts = 18.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 23 = 1.019156 pixels
[Fri Sep 30 00:47:43 2011] 18.202600 total counts/ 5.611900 bgd. counts: snr = 5.314898
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.019156 pixels
  Position = (621.6, 816.5) = 6 9 8.88 24 16 30.5
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 12.6 +/- 4.3
  Background counts = 5.6
  Rate = 0.0002 +/- 8e-05
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Sep 30 00:48:19 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.846
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 0.56"
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src42.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src42.csv
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src42_1.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src42.csv
[Fri Sep 30 00:48:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src42.ximg exists
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Sep 30 00:48:22 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src42 appears to have run properly
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 18.224900, observed total counts = 18.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 23 = 0.031696 pixels
[Fri Sep 30 00:48:53 2011] 18.107310 total counts/ 5.327110 bgd. counts: snr = 5.537220
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.031696 pixels
  Position = (621.6, 816.5) = 6 9 8.88 24 16 30.5
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 12.8 +/- 4.3
  Background counts = 5.3
  Rate = 0.0002 +/- 8e-05
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:29 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.reg
[Fri Sep 30 00:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (596, 791) - (648, 842)
[Fri Sep 30 00:56:29 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23.gif
[Fri Sep 30 00:58:44 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Fri Sep 30 00:58:44 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.evt.gz[events] = 15 counts
[Fri Sep 30 00:58:44 2011] Mean chipx,y = (426.40, 797.40)
[Fri Sep 30 00:58:44 2011] Mean tdetx,y = (4334.60, 3487.40)
[Fri Sep 30 00:58:44 2011] chipx,y range = (409.00-438.00, 785.00-818.00)
[Fri Sep 30 00:58:44 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 14 counts
[Fri Sep 30 00:58:44 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Fri Sep 30 00:58:44 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Fri Sep 30 00:58:44 2011] Not generating rmf since there are only 12 counts
[Fri Sep 30 00:58:47 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:52 2011] 182.868
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.000227, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src23.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 3e-15
[Fri Sep 30 01:00:47 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting