[Fri Sep 30 00:45:35 2011] Detection parameters:
  Position = (182.1, 807.6) = 6 9 24.68 24 16 26.5
  Extent = 0.6" x 0.5", rotation angle = 178 degrees
  Source counts = 20.9 +/- 4.7
  Background counts = 1.1
  Rate = 0.0004 +/- 8e-05

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 2.07'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 00:47:09 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.165
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.44"
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src31.ximg exists
[Fri Sep 30 00:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src31.csv
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src31_1.ximg exists
[Fri Sep 30 00:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src31.csv
[Fri Sep 30 00:47:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Fri Sep 30 00:47:15 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Sep 30 00:47:15 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 22.070100, observed total counts = 24.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 22 = 0.886958 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.886958 pixels
  Position = (182.8, 808.2) = 6 9 24.67 24 16 26.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 21.4 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 30 00:48:19 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.379
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.59"
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src31.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src31.csv
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src31_1.ximg exists
[Fri Sep 30 00:48:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src31.csv
[Fri Sep 30 00:48:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Fri Sep 30 00:48:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src31.csv
[Fri Sep 30 00:48:22 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Sep 30 00:48:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src31.csv
[Fri Sep 30 00:48:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 21.520600, observed total counts = 25.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 22 = 0.036225 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.036225 pixels
  Position = (182.8, 808.2) = 6 9 24.67 24 16 26.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:29 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.reg
[Fri Sep 30 00:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (156, 781) - (210, 835)
[Fri Sep 30 00:56:29 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22.gif
[Fri Sep 30 00:58:10 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Fri Sep 30 00:58:10 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.evt.gz[events] = 21 counts
[Fri Sep 30 00:58:10 2011] Mean chipx,y = (860.33, 787.38)
[Fri Sep 30 00:58:10 2011] Mean tdetx,y = (4344.62, 3921.33)
[Fri Sep 30 00:58:10 2011] chipx,y range = (844.00-879.00, 773.00-806.00)
[Fri Sep 30 00:58:10 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 14 counts
[Fri Sep 30 00:58:10 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Fri Sep 30 00:58:10 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Fri Sep 30 00:58:10 2011] Not generating rmf since there are only 20 counts
[Fri Sep 30 00:58:13 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:52 2011] 200.524
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.000368, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src22.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 4.5e-15
[Fri Sep 30 01:00:47 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting