[Fri Sep 30 00:45:34 2011] Detection parameters:
  Position = (38.7, 151.2) = 6 9 29.83 24 11 3.5
  Extent = 2.1" x 1.4", rotation angle = 27 degrees
  Source counts = 691.6 +/- 27.0
  Background counts = 38.4
  Rate = 0.01 +/- 0.0005

[Fri Sep 30 00:45:39 2011] Off-axis axis estimate = 7.34'
[Fri Sep 30 00:47:09 2011] Using EEF radius (= 2.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 00:47:09 2011] Initial guess for spatial extent in simple fitting = 2.39"
[Fri Sep 30 00:47:09 2011] source mask rpix=4.9, npix_max = 114, mask sum = 121, frac = 1.052
[Fri Sep 30 00:47:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.39"
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 00:47:13 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 00:47:13 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 00:47:14 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:47:14 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 00:47:43 2011] Spatial fit model total counts = 729.997000, observed total counts = 730.000000
[Fri Sep 30 00:47:43 2011] Offset between fit and detection position for source 1 = 0.584528 pixels
[Fri Sep 30 00:47:43 2011] 730.293000 total counts/ 44.828000 bgd. counts: snr = 102.378934
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.584528 pixels
  Position = (39.0, 151.7) = 6 9 29.84 24 11 3.5
  Extent = 2.1 (2.0-2.2)", rotation angle = 0
  Source counts = 685.5 +/- 27.0
  Background counts = 44.8
  Rate = 0.01 +/- 0.0005
[Fri Sep 30 00:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:43 2011] Source does appear to be extended
[Fri Sep 30 00:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 00:48:19 2011] Initial guess for spatial extent in simple fitting = 2.10"
[Fri Sep 30 00:48:19 2011] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.095
[Fri Sep 30 00:48:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.10"
[Fri Sep 30 00:48:20 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 00:48:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 00:48:20 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 00:48:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 00:48:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12031_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 00:48:21 2011] fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:48:21 2011] Fit fullrun_ccd3_acisf12031_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 00:48:53 2011] Spatial fit model total counts = 728.426000, observed total counts = 726.000000
[Fri Sep 30 00:48:53 2011] Offset between fit and detection position for source 1 = 0.067585 pixels
[Fri Sep 30 00:48:53 2011] 728.429200 total counts/ 54.646200 bgd. counts: snr = 91.146514
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.067585 pixels
  Position = (38.9, 151.8) = 6 9 29.84 24 11 3.5
  Extent = 2.1 (1.9-2.2)", rotation angle = 0
  Source counts = 673.8 +/- 27.0
  Background counts = 54.6
  Rate = 0.01 +/- 0.0005
[Fri Sep 30 00:48:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:53 2011] Source does appear to be extended
[Fri Sep 30 00:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:56:28 2011] Not overwriting source region fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 00:56:28 2011] Extracting stamp from image fullrun_ccd3_acisf12031_pi14-548_cl_sm2.00.img.gz, (0, 58) - (133, 246)
[Fri Sep 30 00:56:28 2011] Writing fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 00:56:31 2011] ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.evt and ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 00:56:31 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.evt.gz[events] = 718 counts
[Fri Sep 30 00:56:31 2011] Mean chipx,y = (997.80, 130.50)
[Fri Sep 30 00:56:31 2011] Mean tdetx,y = (5001.50, 4058.80)
[Fri Sep 30 00:56:31 2011] chipx,y range = (970.00-1023.00, 102.00-158.00)
[Fri Sep 30 00:56:31 2011] Size of ../../acisf12031/products/events/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 116 counts
[Fri Sep 30 00:56:31 2011] ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.img and ../../acisf12031/products/images/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 00:56:31 2011] ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.pi and ../../acisf12031/products/spectra/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 00:56:35 2011] ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 00:59:51 2011] Keeping rmf generated by specextract
[Fri Sep 30 00:59:51 2011] 177.707
[Fri Sep 30 01:00:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:20 2011] Error reading totcts from fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 01:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:21 2011] Using photon index=1.80, rate=0.0119, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 01:00:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:21 2011] Updating source flux to 1.6e-13
[Fri Sep 30 01:01:03 2011] Reading fit data from acisf12031/analysis//spectral/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 01:01:03 2011] Spectral fit parameter nH value = 2.16255e+21
[Fri Sep 30 01:01:03 2011] Spectral fit parameter PhoIndex value = 1.55266
[Fri Sep 30 01:01:03 2011] Failed to get F(0.3-8.0) from acisf12031/analysis//spectral/fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 01:01:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:01:03 2011] Using Nh = 2.2e+21, photon index=1.55, rate=0.0119, arf fullrun_ccd3_acisf12031_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 01:01:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:01:03 2011] Updating source flux to 1.7e-13