[Fri Sep 30 00:45:32 2011] Detection parameters:
  Position = (533.5, 396.3) = 6 9 11.70 24 21 36.2
  Extent = 0.5" x 0.5", rotation angle = 30 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 00:45:34 2011] Off-axis axis estimate = 4.88'
[Fri Sep 30 00:47:07 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:07 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Sep 30 00:47:07 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.955
[Fri Sep 30 00:47:07 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 1.13"
[Fri Sep 30 00:47:09 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass0_src37.ximg exists
[Fri Sep 30 00:47:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12031_pi14-548_cl_pass0_src37.csv
[Fri Sep 30 00:47:09 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass0_src37_1.ximg exists
[Fri Sep 30 00:47:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12031_pi14-548_cl_pass0_src37.csv
[Fri Sep 30 00:47:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12031_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12031_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:09 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Fri Sep 30 00:47:09 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Sep 30 00:47:09 2011] Fit fullrun_ccd2_acisf12031_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Sep 30 00:47:36 2011] Spatial fit model total counts = 22.798500, observed total counts = 23.000000
[Fri Sep 30 00:47:36 2011] Offset between fit and detection position for source 36 = 0.332415 pixels
[Fri Sep 30 00:47:36 2011] 23.373140 total counts/ 7.117340 bgd. counts: snr = 6.093257
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.332415 pixels
  Position = (533.2, 396.2) = 6 9 11.73 24 21 35.9
  Extent = 1.0 (0.5-1.7)", rotation angle = 0
  Source counts = 16.3 +/- 4.8
  Background counts = 7.1
  Rate = 0.0003 +/- 9e-05
[Fri Sep 30 00:47:36 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:36 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:36 2011] Source does appear to be extended
[Fri Sep 30 00:47:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:15 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Sep 30 00:48:15 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Fri Sep 30 00:48:15 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.99"
[Fri Sep 30 00:48:18 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass1_src37.ximg exists
[Fri Sep 30 00:48:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12031_pi14-548_cl_pass1_src37.csv
[Fri Sep 30 00:48:18 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass1_src37_1.ximg exists
[Fri Sep 30 00:48:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12031_pi14-548_cl_pass1_src37.csv
[Fri Sep 30 00:48:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12031_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12031_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:19 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Fri Sep 30 00:48:19 2011] fullrun_ccd2_acisf12031_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Sep 30 00:48:19 2011] Fit fullrun_ccd2_acisf12031_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Sep 30 00:48:44 2011] Spatial fit model total counts = 23.206200, observed total counts = 23.000000
[Fri Sep 30 00:48:44 2011] Offset between fit and detection position for source 36 = 0.044567 pixels
[Fri Sep 30 00:48:44 2011] 23.914080 total counts/ 8.642580 bgd. counts: snr = 5.194694
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.044567 pixels
  Position = (533.2, 396.2) = 6 9 11.73 24 21 35.9
  Extent = 0.9 (0.5-1.7)", rotation angle = 0
  Source counts = 15.3 +/- 4.9
  Background counts = 8.6
  Rate = 0.0003 +/- 9e-05
[Fri Sep 30 00:48:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:44 2011] Source does appear to be extended
[Fri Sep 30 00:48:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:53:20 2011] Not overwriting source region fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.reg
[Fri Sep 30 00:53:20 2011] Extracting stamp from image fullrun_ccd2_acisf12031_pi14-548_cl_sm2.00.img.gz, (492, 355) - (574, 437)
[Fri Sep 30 00:53:20 2011] Writing fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36.gif
[Fri Sep 30 00:55:39 2011] ../../acisf12031/products/events/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.evt and ../../acisf12031/products/events/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Sep 30 00:55:39 2011] Size of ../../acisf12031/products/events/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.evt.gz[events] = 21 counts
[Fri Sep 30 00:55:39 2011] Mean chipx,y = (517.90, 645.43)
[Fri Sep 30 00:55:39 2011] Mean tdetx,y = (3706.43, 3568.10)
[Fri Sep 30 00:55:39 2011] chipx,y range = (499.00-536.00, 630.00-665.00)
[Fri Sep 30 00:55:39 2011] Size of ../../acisf12031/products/events/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 14 counts
[Fri Sep 30 00:55:39 2011] ../../acisf12031/products/images/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.img and ../../acisf12031/products/images/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Sep 30 00:55:39 2011] ../../acisf12031/products/spectra/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.pi and ../../acisf12031/products/spectra/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Fri Sep 30 00:55:39 2011] Not generating rmf since there are only 15 counts
[Fri Sep 30 00:55:42 2011] ../../acisf12031/products/lightcurves/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Sep 30 00:56:28 2011] 169.936
[Fri Sep 30 01:00:19 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:19 2011] Error reading totcts from fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Sep 30 01:00:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:20 2011] Using photon index=1.80, rate=0.000271, arf fullrun_ccd2_acisf12031_pi14-548_pass1_cl_src36.arf
[Fri Sep 30 01:00:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:20 2011] Updating source flux to 3.8e-15
[Fri Sep 30 01:00:36 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting